AirPort Extreme and Printing

I have a problem trying to print wirelessly through AirPort Extreme. I have an Epson Stylus D78 and am connecting the printer through a powered 4-port USB hub. All firmware is fully up to date and I am running Leopard 10.5.3. Can you please help me?
Thanks

Hi,
Have you tried to connect the printer directly to the AEBS instead of the hub?
If it works, it would isolate the problem to the hub.
Brad

Similar Messages

  • TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

    i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
    i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
    i dont know what else to try, i have followed every step on the manual, and nothing works..
    someone help me

    Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

  • IPads, Airport Extreme and Printing

    Hi all,
    I bought an Airport Extreme and have plugged a printer into the USB. The instructions imply anything on the Airport network should be able to use the printer.
    Both my desktop and laptop Macs can, but I was really surprised to find that our iPads can't see it. It is enabled in Airport, but I haven't done anything with Bonjour.
    I've looked through posts on here and it seems that for some reason iPads can't connect to a printer on Airport Extreme... this seems really, really odd!
    I have no intention of buying an HP printer, which seems to be the only straightforward option. I tried searching for an oft-mentioned App called "Printopia" but it's no longer on the (Canada) app store.
    This really does beggar belief.... it's only printing, for goodness sake! Surely it's just a matter of streaming data to a printer... which the iPad should surely be able to do over the air to the Airport Extreme??
    Does anyone have any ideas how I can print from an iPad, without buying another printer?
    All advice appreciated!

    Thanks both.
    I didn't think about drivers as I haven't had to install one for Mac for (probably) years! Things all just work when plugged in!
    I tried Canon but their software only works with their wireless printers, which doesn't help me.
    I didn't realise Printopia works just from a Mac.... in which case I might as well carry on doing what I'm doing now... emailing or synching docs through iTunes and print from the Mac.
    Lets hope other printer manufacturer's make AirPrint capable machines soon...

  • Airport extreme and printing on ipad

    I have an airport extreme and a usb printer connected to the airport extreme. I'm trying to print using the airport extreme to a non airport printer I don't see the printer on the ipad when I select printer. (nothing shows up)
    But when I add a printer on my mac that is connected to the airport extreme I can see the printer and it shows up as bonjour. (two entries show up, one with the location set as the base station the other nothing showing anything in the location option.
    Any idea's why the printer doesn't show up on the ipad or my iphone?
    Thanks

    Since you do not have an AirPrint compatible printer, you will need to install an App like Print Central to see if it might allow printing from the iPad and iPhone.  Most printers are supported, but you really will not know if it will work until you try.
    PrintCentral for iPad on the iTunes App Store
    Please post in the support area if you need more help in that regard. We are not iPad and iPhone experts here.
    Using iPad         Using iPhone       

  • Airport Extreme and Printing : is there a solution

    HI all,
    I have gone through many topics on printing with airport extreme and I have seen a lot of people like me having the same problem : the printer plugged to the usb port of the Airport Extreme is visible but can not print.
    People tried to change firmware, plug unplug the printer, etc... But it seems that there is no solution
    Is there really any solution ?
    It is the first time I see an Apple Product which such problems ... Is there anyone from Apple who can answer this problem ?
    Thanks in advance

    I HAVE THE SOLUTION (AT LEAST IT WORKS FOR ME !!)
    Thanks to another post (http://discussions.apple.com/thread.jspa?threadID=1201663&tstart=0) :
    I changed the USB Cable, and now it works perfectly.(souns so simple ... but it worked) (it is strange, because I was able to print through usb with my old cable ..)
    Many thanks for this help

  • Windows, Mac Non-wireless Mac, Airport Extreme and Printer

    I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
    eMac Airport Extreme Cablevision Cable Modem
    Printer
    The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
    If anyone has any advice, I would apreciate them to post back. Check back soon,
    thatthaneguy
    HP-Compaq nc6220   Windows XP   Windows XP Professional

    If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
    If the VPN is not operating then try these guides.
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://www.ifelix.co.uk/tech/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://www.ifelix.co.uk/tech/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html
    iFelix

  • Airport extreme and Printing : a solution that works for me

    I post a new topic in order to avoid people going throught various topics.
    _Explanation of the problem I had :_
    When I plugged directly my printer (xerox 6110) to the usb of my PowerBook it worked fine. When I connected the same printer with the same cable to the usb port of my airport extreme (square model), I was Apple to install it throught bonjour on my laptop and my IMac. But I was only able to print trhourght textedit, and not throught word, excel, safari, etc. When printing from this application, after a while I had a page print with a timeout problem.
    Solution (thanks to the following post : http://discussions.apple.com/thread.jspa?threadID=1201663&tstart=0 )
    After trying drivers, and lot of other things, I tried what suggested in the topice above : I changed my USB cable that was connecting my AE to my printer : and now IT WORKS.
    It is strange because I was able to print directly throught USB using the same cable, but not using my AE.
    But anyway It work now !! This is the most important ! a lot of thanks for your help.
    Hope it will help some of you

    Ohhhh, Silly, silly moi. Ok, got it. Now I see "Partition". Thanks! Will try again. Downloading Windows support software as I type.
    Thank you.
    One more thing - while attempting installation the first time (before I stumbled on this thread) - I looked up YouTube re how to create a USB bootable ISO (which included editing the info.plist file in Boot Camp Assistant).
    When I tried installing 8.1 from the ISO, the installation aborted saying "cannot find resources" (something like that) - this occured after the first stage, i.e. while "preparing files to install Windows".
    Assuming I get this again (I hope not!), is it because of a corrupted ISO?

  • New airport extreme and printer issues

    OK here is the deal
    I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

    There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
    Sorry to be so vague, just thought it might be a start for you.

  • I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Airport Extreme Sharing printer to Leopard and Windows 7 via Ethernet port.

    Hello!
    My home office is in a mixed environment, 1 iMac with Leopard 10.5.8, and the other iMac running Windows 7 Ultimate x64 on bootcamp. Both computers are connected to the Airport Extreme (dual band version, firmware 7.4.2) via Ethernet. I attached the HP LaserJet P1006 to the Airport's usb port in order to share the printer to both platforms.
    My problem is that, I got the printer installed on Win 7 by using bonjour print service v2.02 without any problem as it said works in both Ethernet and wireless, I sent a print test from win 7 successfully, then I did another test from leopard ( as I presumed it should works also), however, it says "the printer is in use". and wouldn't print. I tried restart the Airport Extreme and tried print from leopard again and that was fine but then Win 7 couldn't print.
    Is there any solution for Mac + Win environment like my description? If I have 2 computers running on OS X they print perfectly well. Thanks all!
    My solution for now is to physically plugging the printer to where I need to print from. I use Ethernet wired both computers is because I want to take the advantage of the gigabyte lan port for speedy files transfer between both computers.

    If networking isn't working out for you, you may want to try out a swtich. Best Buy sells one by IOGEAR that allows for two USB connections to tie into one computer. So long as windows 7 can either download its own driver for the printer for basic features, or if you want to download canon's driver this solution will work. The only draw back is having to bring the laptop near the printer when you need to print.
    IOGEAR SWITCH
    MX860 Drivers and Support Page
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Airport Extreme and Wireless Printing

    Okay so i know that you can make wireless printing by simply connecting your printer to the airport extreme. However I have a wireless printer and i read somewhere that the extreme does not allow the wireless printer to be discovered when used with the extreme. I want to know if this is true. I currently use a linksys router and whenever i print something, the first time takes forever for it to detect the printer. I am hoping that a newer router will help but i want to know if the extreme does support wireless printers.

    Same issue here. I recently upgraded to an Airport Extreme and can no longer print wirelessly. Before this router I used a different brand of wireless router and had no issues. When I go to the printer itself, an HP OfficeJet 7410, and look for networks on the little display it can see mine and the neighbors. However, when I tell it to join the network it gives me an error message along the lines of "Cannot join this network." New network password has been entered.

  • Printing with a USB printer using Airport Extreme and Vista

    I have a airport extreme and it prints fine with all of my Macs.
    I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
    * Installed Bonjour Printing software on the Windows Machine
    * Installed the print drivers on the Windows Machine
    * Bonjour finds the printer and driver without any problem
    * When I test the printer will print either one page or half of one page and then I get an error message.
    * I enabled the UDP 5353 port in the Firewall
    The printer is a Epson Photo R220
    I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
    If anyone out there has a solution I would very appreciative.
    Thanks

    No help from the forum. I used Bonjour for Windows.

  • Airport extreme and HP printer over ethernet problem

    I'm new here, so forgive me if this topic has been done to death. I'm running airport extreme and have an HP photosmart 2600 connected to it via ethernet. My wife has no trouble printing with her Macbook Pro (Snow Leopard), but my daughter's older iMac only prints very intermittantly and mostly not at all.I've tried all the sharing options and reinstalling/updating the HP software, but no luck. The printer is at the other end of the house from the Airport, so connecting via usb is not an option. Any assistance much appreciated, thanks.

    Using Ethernet should give the best results, plus it allows the use of more than just the print function, which USB would not. Proof of that should be the fact that this older HP model (it works with OS 9!!!) works well with your recent Mac's Snow Leopard OS.
    If the iMac has OS X 10.5.8, the correct printer driver should have already been installed and no further update would have been needed. All that should have been needed was to open the Print & Fax panel of System Preferences and add the HP printer as the iMac's default printer.
    When the iMac was first unable to print using the HP, did you consider any chance that the iMac was too far from the Extreme, or that there might have been some interference involved? Did you power cycle starting with the modem? When power cycling is necessary, printers seem to throw off unexplainable errors (such as out of paper or ink, paper jam - when none of these is true).

  • Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

    I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
    Analysis:
    Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
    Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
    Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

    Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
    Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
    Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
    Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
    To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

    Hello,
    I have a Mac and PC Network composed of:
    iMac 24'' Leopard 10.5.2 (main computer)
    2 PC Fujitsu Pentium 4 on Windows XP
    2 PC HP Pentium 4 on Windows XP
    my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
    I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
    I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
    I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
    Questions:
    1. Any help on the above ? Any advice ?
    2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
    3. Why HP config doesn't recognize the printer on the network ?
    4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
    5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
    6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
    Thanks a lot for your help.
    P.
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300

    NCBob, Welcome to the discussion area!
    If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

Maybe you are looking for