Airport Extreme and Wireless Printing

Okay so i know that you can make wireless printing by simply connecting your printer to the airport extreme. However I have a wireless printer and i read somewhere that the extreme does not allow the wireless printer to be discovered when used with the extreme. I want to know if this is true. I currently use a linksys router and whenever i print something, the first time takes forever for it to detect the printer. I am hoping that a newer router will help but i want to know if the extreme does support wireless printers.

Same issue here. I recently upgraded to an Airport Extreme and can no longer print wirelessly. Before this router I used a different brand of wireless router and had no issues. When I go to the printer itself, an HP OfficeJet 7410, and look for networks on the little display it can see mine and the neighbors. However, when I tell it to join the network it gives me an error message along the lines of "Cannot join this network." New network password has been entered.

Similar Messages

Airport extreme and HP printer over ethernet problem

I'm new here, so forgive me if this topic has been done to death. I'm running airport extreme and have an HP photosmart 2600 connected to it via ethernet. My wife has no trouble printing with her Macbook Pro (Snow Leopard), but my daughter's older iMac only prints very intermittantly and mostly not at all.I've tried all the sharing options and reinstalling/updating the HP software, but no luck. The printer is at the other end of the house from the Airport, so connecting via usb is not an option. Any assistance much appreciated, thanks.

Using Ethernet should give the best results, plus it allows the use of more than just the print function, which USB would not. Proof of that should be the fact that this older HP model (it works with OS 9!!!) works well with your recent Mac's Snow Leopard OS.
If the iMac has OS X 10.5.8, the correct printer driver should have already been installed and no further update would have been needed. All that should have been needed was to open the Print & Fax panel of System Preferences and add the HP printer as the iMac's default printer.
When the iMac was first unable to print using the HP, did you consider any chance that the iMac was too far from the Extreme, or that there might have been some interference involved? Did you power cycle starting with the modem? When power cycling is necessary, printers seem to throw off unexplainable errors (such as out of paper or ink, paper jam - when none of these is true).

Airport Extreme and multifunction printer.

The printer works wirelessly (connected via USB to the airport extreme), is there a setting to get the scanner function working wirelessly? If not, the multifunction machine (Canon pixma MX850) is networkable, will all functions work if I connect the printer using an ethernet cable to the AE, and connect wirelessly with my computer?

is there a setting to get the scanner function working wirelessly?
Not through USB.
will all functions work if I connect the printer using an ethernet cable to the AE, and connect wirelessly with my computer?
Yes. The computers need to have the drivers for it installed.
(46581)

Airport Extreme and USB Printer Problem

I have an Epson printer connected to the USB port of my Airport Extreme. This has worked just fine for years. But from today neither my iMac nor my MacBook Air can "see" the printer any more. I have rebooted everything a couple of times, but still no joy.
I have connected the printer directly to a USB port on my iMac, and all is well, so I guess the problem is not with the printer.
The only thing significant done to my system in recent times is the latest security update, which I installed yesterday.
Can anybody give me a clue as to why this problem has suddenly raised its head after all these years?

Hi bricknell,
It sounds like you are experiencing some printing issues after performing an update to your computer’s software. Here is an article for you with some troubleshooting steps that will help you address this issue:
Troubleshooting printer issues in OS X - Apple Support
https://support.apple.com/en-us/HT203343
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Airport Extreme and USB printer

This past week upgraded my home system to Verizon's FIOS--new router, wiring, etc. Got the Airport up and running without too many glitches. I did have to unplug it a few times in the process. But now I find the Airport no longer sees my Lexmark C510 printer. It's never had a problem seeing it before and I fail to understand why any external changes would affect this connection between the Airport and printer. I note, too, that in the past week I updated the Airport firmware to the latest, and have heard that others have problems with printers subsequent to that. The Airport DOES see the USB hard drive connected. No trouble there. This is purely a printer issue.
I have unplugged the printer, unplugged the Base Station, and shut down everything and brought it up one piece at a time, but no change in the status of the printer.

Gregory Frost wrote:
SNIP>>>> I note, too, that in the past week I updated the Airport firmware to the latest, and have heard that others have problems with printers subsequent to that. The Airport DOES see the USB hard drive connected. No trouble there. This is purely a printer issue.
I have unplugged the printer, unplugged the Base Station, and shut down everything and brought it up one piece at a time, but no change in the status of the printer.
Try as others have to roll back the firmware to 7.3.2. Worth a shot since it was running ok before the upgrade.

AIRPORT EXTREME AND MULTIPLEX PRINTER SCANNER USE

I have a pc running win xp pro. I have a cannon pixma mp780. I would like to setup using all functions on the printer including the scanner. HELP!

Hello PAPPY2. Welcome to the Apple Discussions!
Unfortunately, the AirPort base station's USB port does not support the "advanced" features (scanning, copying, faxing, etc.) of multi-function printers. For the multi-function printers that are supported, they are only supported for printing.

Printing with a USB printer using Airport Extreme and Vista

I have a airport extreme and it prints fine with all of my Macs.
I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
* Installed Bonjour Printing software on the Windows Machine
* Installed the print drivers on the Windows Machine
* Bonjour finds the printer and driver without any problem
* When I test the printer will print either one page or half of one page and then I get an error message.
* I enabled the UDP 5353 port in the Firewall
The printer is a Epson Photo R220
I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
If anyone out there has a solution I would very appreciative.
Thanks

No help from the forum. I used Bonjour for Windows.

Windows, Mac Non-wireless Mac, Airport Extreme and Printer

I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
eMac Airport Extreme Cablevision Cable Modem
Printer
The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
If anyone has any advice, I would apreciate them to post back. Check back soon,
thatthaneguy
HP-Compaq nc6220 Windows XP Windows XP Professional

If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
If the VPN is not operating then try these guides.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
i dont know what else to try, i have followed every step on the manual, and nothing works..
someone help me

Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

IPads, Airport Extreme and Printing

Hi all,
I bought an Airport Extreme and have plugged a printer into the USB. The instructions imply anything on the Airport network should be able to use the printer.
Both my desktop and laptop Macs can, but I was really surprised to find that our iPads can't see it. It is enabled in Airport, but I haven't done anything with Bonjour.
I've looked through posts on here and it seems that for some reason iPads can't connect to a printer on Airport Extreme... this seems really, really odd!
I have no intention of buying an HP printer, which seems to be the only straightforward option. I tried searching for an oft-mentioned App called "Printopia" but it's no longer on the (Canada) app store.
This really does beggar belief.... it's only printing, for goodness sake! Surely it's just a matter of streaming data to a printer... which the iPad should surely be able to do over the air to the Airport Extreme??
Does anyone have any ideas how I can print from an iPad, without buying another printer?
All advice appreciated!

Thanks both.
I didn't think about drivers as I haven't had to install one for Mac for (probably) years! Things all just work when plugged in!
I tried Canon but their software only works with their wireless printers, which doesn't help me.
I didn't realise Printopia works just from a Mac.... in which case I might as well carry on doing what I'm doing now... emailing or synching docs through iTunes and print from the Mac.
Lets hope other printer manufacturer's make AirPrint capable machines soon...

Airport Extreme - Use a Printer and Ext. Harddisk via USB hub same time?

I would like to purchase a Wireless Router that would allow me to use a printer (Dell All in One 962) and an External Hard Disk (yet to buy)simultaneously. I liked the Netgear WNDR 3700 router, but it does not support printer sharing!
Would Airport Extreme Router allow me to use both at the same time via high speed USB hub? Are all USB printers and USB external hard disks compatible with this router - any compatibility guide available?
Message was edited by: JJacob

You won't know for sure until you try, but you can get some indication by trying the following "test".
Plug the Dell device into the USB port on the AirPort Extreme and make sure it is powered up.
Open System Preferences (gear icon) on the dock and then open Print & Fax. Click the + (plus) button at the bottom of the printer list box.
Does your printer name show up in the next box? If so, click on the printer name to highlight it, then click the Add button at the lower right to install the printer at that location.
Keep in mind that if your device is compatible, only the print function will work when your all-in-one is connected to the AirPort. Scan, copy, maintenance and other functions are not supported when the device is connected to the AirPort, so if you need these services, you'll have to connect the all-in-one directly to your computer when you need them.

Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Airport extreme and printing on ipad

I have an airport extreme and a usb printer connected to the airport extreme. I'm trying to print using the airport extreme to a non airport printer I don't see the printer on the ipad when I select printer. (nothing shows up)
But when I add a printer on my mac that is connected to the airport extreme I can see the printer and it shows up as bonjour. (two entries show up, one with the location set as the base station the other nothing showing anything in the location option.
Any idea's why the printer doesn't show up on the ipad or my iphone?
Thanks

Since you do not have an AirPrint compatible printer, you will need to install an App like Print Central to see if it might allow printing from the iPad and iPhone. Most printers are supported, but you really will not know if it will work until you try.
PrintCentral for iPad on the iTunes App Store
Please post in the support area if you need more help in that regard. We are not iPad and iPhone experts here.
Using iPad Using iPhone

Airport Extreme and Printing : is there a solution

HI all,
I have gone through many topics on printing with airport extreme and I have seen a lot of people like me having the same problem : the printer plugged to the usb port of the Airport Extreme is visible but can not print.
People tried to change firmware, plug unplug the printer, etc... But it seems that there is no solution
Is there really any solution ?
It is the first time I see an Apple Product which such problems ... Is there anyone from Apple who can answer this problem ?
Thanks in advance

I HAVE THE SOLUTION (AT LEAST IT WORKS FOR ME !!)
Thanks to another post (http://discussions.apple.com/thread.jspa?threadID=1201663&tstart=0) :
I changed the USB Cable, and now it works perfectly.(souns so simple ... but it worked) (it is strange, because I was able to print through usb with my old cable ..)
Many thanks for this help

Airport Extreme and Wireless Printing

Similar Messages

Maybe you are looking for