Airport Extreme and X Box

Does Airport Extreme/Airport work with X Box live ? Apple rep at local store does not believe that it works !!!!
Also if it does work is there a way to boost the range ??
tx

No, I doubt its your router. I knoe for a fact that Xbox Live works on BOTH the Airport Express and Airport Extreme. I am using the extreme right now in my dorm room. Ok so do you have a password on your wireless network? That is step one. So if you do not have a Airport password, then turn on your Xbox 360 and go to the "System tab" on the main dashboard (it is the farthest right) and click down to the "Network Settings" and then click edit settings. If you have the wireless adaptor for the Xbox 360 (http://www.xbox.com/en-US/hardware/x/xbox360wirelessnetadapter/default.htm) then you should have an option to select the very bottom section which says "wireless mode." That will get you in the right direction. The way I have mine set up is that I have a hardwire going directly from the back of the 360, into the LAN port of the Airport Extreme so It is more hardwired than it is wireless. But I have the wireless bridge and It does work just as well but in my "tight" living quarters of college that was the best choice.
So let us know if you have a password on the Airport and if you have the Xbox 360 wireless adaptor.

Similar Messages

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

Apple TV, Airport Extreme and Disk Sharing

Can I put all my photos, music, vidoes, etc. on a USB drive connected to my airport extreme and NOT need a Mac on to play music, etc?
In other words, will the Apple TV see the shared USB drive and pull from there?

Whether or not the movies are streamed or stored
locally on the atv, you will still have long menu's.
Not necessarily. iTunes allows you to limit what is stored locally on the Apple TV (for instance by syncing only so many recent or unwatched items, or just specific ones, selected from the category tabs). This is relatively easy to manage with the iTunes GUI, since even for long lists you have tabs, scroll bars, & clickable boxes, giving you much quicker access to list items compared to Apple TV's sequential menus.
Moreover, as the Apple TV drive fills up, it gives preferential treatment to content in a predictable hierarchy, which together with iTunes management of what is synced can keep stored item lists short & fresh. iTunes based management also allows for an effective form of parental control (by allowing only syncing with selected items from a selected iTunes library) & for different locally stored content for different Apple TV's. When you want (or want to allow) full iTunes library access, you can set up an Apple TV for streaming from selected computers.
Regarding USB-connected auxiliary storage in general, it isn't clear how it could be managed -- remember, there is no Finder (& probably not enough RAM to support it) in Apple TV, plus no GUI to support drag & drop or the other file system amenities we are accustomed to in OS X. It may be doable, but probably not in a manner appealing to non-geek type users.

Airport Extreme and Time Machine. Despite now being officially supported, does it work?

The subject says it all. After purchasing the new tall Airport Extreme and connecting a WD 2TB drive (as I had with the earlier AE) I have yet to have a backup execute properly. It will be fine for a few days then TM will announce it's done a verification and a new backup is required. Thank goodness I have offsite backup since TM is doing absolutely SFA for me at the moment.

Yuri van Hoof wrote:
Now I connected this USB External Disk to the Airport so I can use it as an network disk. This is working as well. I can get it mounted and read and write on it. Nice...so far.
Now I want TIme Machine to update/compleet my latest back-up, and here the problems start.
I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.
But then I got the message; disk is full. Hmm?
Yes, because Time Machine stores backups differently when done over a network, it doesn't see the ones made while directly connected. See the blue box in #17 of Time Machine - Frequently Asked Questions.
Does anybody now how to get the old 'Backups.backupdb' connected ore recognized as the ONE which TM should compleet?
Realistically, you have two choices:
Knowing the considerable risks, as detailed in the first link, if still you want to back up wirelessly, connect the disk to your Mac and erase it. Then connect it to your Airport and let Time Machine start fresh.
To return to backing-up while directly-connected, delete the <Computer Name>.sparsebundle from the top level of the drive.

Can time capsule connect to ethernet through airport extreme and then send wifi on a different band ?

Hope this makes sense.
At the moment, an Airport Extreme (n) is connected to a single wall outlet by ethernet and sends wifi signals at both 2,4 and 5 GHz.
I would like to add a Time Capsule (also n), position it immediately next to or above this Airport Extreme and connect to the AE with a very short ethernet cable (so not extending the Extreme's wifi signal since that could reduce the signal's strength by half).
This way both are connected to the internet by ethernet (the AE directly to the wall outlet, and the TC to the AE's ethernet out), hence both should be able to send wifi at full signal strength.
In order to achieve full wifi strength I would then set the Extreme to (only) send at 2,4 GHz and the Capsule to (only) send at 5 GHz.
Please note that the house has an open (loft style) floorplan, so there's no reason to position the AE and the TC at a distance from each other for wifi reach throughout the house.
Dear Bob, what do you think? I've been reading up but didn't find a directly related post.
Is this the right way to go about it?
KInd regards.

I would like to add a Time Capsule (also n), position it immediately next to or above this Airport Extreme
The position immediately above is poor.. and next to each other is even worse.. you are blocking the antennas from one side or the other..
Please use a patch lead of around 2M (6feet) min.. and place them that far apart.
very short ethernet cable (so not extending the Extreme's wifi signal since that could reduce the signal's strength by half).
Having the devices link wirelessly causes the speed to drop by half which is caused by double hop wireless.. it does not reduce signal actually.. but you can have interference issues.
In order to achieve full wifi strength I would then set the Extreme to (only) send at 2,4 GHz and the Capsule to (only) send at 5 GHz.
Please note that the house has an open (loft style) floorplan, so there's no reason to position the AE and the TC at a distance from each other for wifi reach throughout the house.
The gap between two radio transmitters is so they don't flood the receiver on the unit next to them.. It has nothing to do with the room. If I stick two transmitter/receivers next to each other they need some space. It is also to give full access to the antennas which are spaced around the sides on the older N models.
You also cannot turn off one band.. If they are dual band models.. ie Gen3 AE and later. Gen2 TC and later.. they are permanently dual band. You cannot do anything about it.
You can simply set the channels.. although auto should work.. there are 11 channels for 2.4ghz.. set one to channel 1 and the other to 11.
At 5ghz there are heaps of channels.. set one to 36 and the other to 149.. or whatever is available.
You are not going to achieve anything much doing this unless you have more clients than bandwidth.. ie both boxes can fully service internet to up to 10 clients.. maybe more if each band is used properly.. you will gain nothing using two routers next to each other.
Beaten by your preferred forum eggs spurt.. !!

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

Setup and connections for 3 airport extremes and 2 switches?

I'm finally getting ethernet wiring in my house rather having to rely on just wireless, but due to the lath and plaster walls I'll still end up having a separate Airport Extreme 802.11ac unit on each floor, otherwise the signal drops off dramatically with dead spots. I'm assuming that I should no longer do an extended network between the airport extremes, but I'm not sure of the proper wiring between the ethernet switches I'll have, the airport extremes, etc. either. Here's the gear...
2nd floor
cable modem
8 port ethernet switch
main airport extreme, should provide DHCP and NAT
cable modem plugs into the main switch
airport extreme plugs into the main switch
1st floor
airport extreme
there will be an ethernet cable from the basement ethernet switch to the 1st floor unit, which is the only feasible hardwire connection that I can make unless I pull a second long run of ethernet from the second floor, go to the basement and then back over to the first floor connection spot.
Basement
airport extreme
second 8 port ethernet switch
there will be an ethernet cable running from the 2nd floor ethernet switch to the basement switch
There are also additional airport express boxes attached to audio equipment and an AppleTV attached to an AV receiver for TV. Various printers, game consoles, etc. will plug into the ethernet switches.
As described above, all connections are going to the switches, not coming out of the main airport extreme and going to another airport extreme.
First of all, is the wiring described make sense or should it be handled differently?
Secondly, rather than an extended network, since I'll have hardwire ethernet connections between switches to all of the airports, what is the proper network topology to use in the airport utility? Does each of the three airports end up being their own wireless network, but just sharing the same name for 802.11 b/g, n, and ac? Any links to help me figure this out or do I need to make an Apple genius appointment?

2nd floor
cable modem
8 port ethernet switch
main airport extreme, should provide DHCP and NAT
cable modem plugs into the main switch
airport extreme plugs into the main switch
What is the make and model number of the modem?
If it is a simple modem....(not a modem/router or gateway device)....you cannot have an Ethernet switch between the simple modem and the AirPort Extreme.
Instead, the modem must connect to the AirPort Extreme, and the Ethernet switch then connects to the AirPort Extreme.
However, if your "modem" is a modem/router or gateway device.....you could connect the Ethernet switch to the modem/router......but you would not configure the AirPort Extreme to provide DHCP and NAT.....since the modem/router or gateway would already be providing those services.
Let's get this clarified before we go any further, since the entire network will depend on this.

I just bought a mac mini...can i just connect an ethernet cable to the airport extreme and set up the mini through an existing mac

I just took the mini out of the box and hooked it up to the airport extreme through a direct ethernet cable between the two. Can i find the mini and set it up through an existing mac that is also hard wired to the network? Help would be greatly appreciated.

Thank you for your response.. I don't have a monitor nor a wireless keyboard to use on the mac mini...apple salesguy at bb tells me that I can hook up the mini to the ethernet port of my airport extreme and find the mini using finder on my 27 inch mac.
that my regular mac would see everything on the mini and that i can proceed to set everything on the mini through my regular mac...
I am trying to purchase the server software from the app store and turn the mini into a server..
that is what i am attempting to do.

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

Airport Extreme and external HDD - cannot be found under Windows (XP/Vista)

Dear All,
I am about to loose it. I have an Airport Extreme (7.4.2), most recent version (802.11n)connected to my cable modem. Attached is a 2TB HFS+ Formated HDD. I have a number of machines. My primary machine is a Dell XPS with Vista and MacDrive installed.
Now: On my AirPort utilities through the Dell the different HDD's connected via USB (I have tried half a dozen) are all visible. They are shared and I have tried all options, e.g. "with Disk Password" etc, tried to give and deny access to guests etc.
I have tried various things incl. switching off the firewall has not been a success either. I am basically ready to buy a Mac now, but I am worried that the problem will persist for all my Windows based PC's.
Who can help with a step to step guide? tried the TCP/IP settings on the XP machine as well (entering the IP address of both Airport Extreme and Express).

Hi!
I've got the same problem as of Friday when I upgraded my Notebook from XP to Windows 7.
It does not recognize the HDD anymore, neither on the Windows7 Notebook nor on 2 different XP- PC's.
I disabled the password functionality and removed the HDD several times, no change.
When I look to the data volumes overview in the system settings, all internal HDD's and the CD partition of the Toshiba drive are shown. The HDD partition of the drive is shown as "non allocated".
Is there any workaround to get access to the data????
Best regards,
Helmut

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized. I have been on the computer and gone to airport utility and it is simply not showing up at all. What can I do?

I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?

Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

Airport Extreme and X Box

Similar Messages

Maybe you are looking for