Airport Extreme- anybody have a workaround for the lack of Wake on LAN ?
I've read in a number of places that the Airport Extreme (and other Apple routers) don't allow for the standard Wake on LAN packet to wake a sleeping Mac.
Does anybody know of a workaround for the Airport Extreme that might allow for waking a sleeping Mac on the LAN remotely ?
Thanks,
Ed
Does anybody know of a workaround for the Airport Extreme that might allow for waking a sleeping Mac on the LAN remotely ?
There isn't any easy solution, but one possible method was posted here.
(41986)
Similar Messages
-
Airport Extreme (802.1) cannot connect for the first time.
Hi all!
I got an Ubuntu running Wine and the Admin Utility For Windows. I am trying to connect (after a hard reset) to the Airport Extreme Base Station. But no matter what I do I cannot get through the default password (which is supposed to be 'admin' or 'public' ) Neither work - can't configure the router! Please advise!Do as it says. Your license is for Creative Suite, not Acrobat. You must activate the license by opening one of the other programs first.
-
Does anybody have a solution for the NAT problem?
Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
What's the secret? Any hints?
Best regards from Munich / Germany,
r.v.Hi
I have the same problem.
I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
APPLETTRANSMITTER:
URL url=null;
MediaLocator media=new MediaLocator("vfw://0");
try{
url = new URL("http://localhost:8080/servlet1");
catch(MalformedURLException mue){mue.printStackTrace();}
URLConnection conn=null;
try{
conn = url.openConnection();
catch(IOException ioe){ioe.printStackTrace();}
conn.setDoOutput(true);
OutputStream os=null;
ObjectOutputStream oos=null;
InputStream in=null;
ObjectInputStream iin=null;
MediaLocator mResp=null;
String r=null;
try{
os=conn.getOutputStream();
oos=new ObjectOutputStream(os);
oos.writeObject(media);
//oos.writeObject("Prova Servlet");
oos.flush();
catch(IOException io){io.printStackTrace();}
catch(ClassNotFoundException cn){cn.printStackTrace();}
SERVLET1
ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
MediaLocator ml =null;
try{
ml = (MediaLocator) objin.readObject();
context.setAttribute("media",ml);
catch(ClassNotFoundException e)
{e.printStackTrace()}
But on servlet1 there is a ClassNotFoundException: MediaLocator
What do we think about the solution and exception problem?
Best Regards,
Nico from Italy -
Does anybody have a solution for the following?
A couple days ago I had a white screen on my ipod nano and now I have white lines going up and down the screen. I tried reseting it and it still did not work.
it probably is the screen, did anything happen to it? did you drop it? get water?
-
A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.
Yes, you can.
-
I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?
Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.
+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network. -
I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??
So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin. -
I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?
You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.
-
I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.
You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield -
I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw
There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton
Maybe you are looking for
-
Need help restoring data after security wipe - Urgent!
Hello, I am in need of urgent help. I had saved some really important information in the memos of my blackberry curve 8520. After that I changed my phone to a non-blackberry phone. but I still had the old phone but it was kept off most of the time. I
-
ICloud photos doesn't sync with PC after iOS 8 installation on iPad
After installing iOS 8 on my iOS devices (3), photos no longer sync with my PC. Sync worked ok before the iOS so-called 'upgrade', but now it doesn't. Contacts and Calendar seem still to sync, but not photos. Once again, Apple runs ahead with changes
-
Hi I created an exe for a jar file using Xenoage. The exe file executes fine in normal conditions. I used a license manager for my software. The input file for the license manager is the exe file created by Xenoage. The output file obtained is in an
-
5th Genertation Ipod Wont Restore.
Ok so my itunes detects it. First it says its corrupted.fine. So i try restoring it and it gives me a message that says "There was a problem downloading the Ipod software for the Ipod "Ipod" The Requested source was not found" I dont know whats wrong
-
My iPod touch 3rd gen won't update to iOS 5
iTunes keeps displaying the message saying that I have the latest update. I have iTunes 10.5 installed and everything, it's just that the iOS update won't come through. I currently have iOS 4.2 on my iPod. Any help is appreciated.