AirPort Extreme Apple ID error

The yellow light is constantly blinking on my AirPort Extreme. Using the Airport Utility I discovered the error is "unrecognized Apple ID or password" for Back My Mac. I'll renter the password, update the device and status light turns green. Sure enough however, a day later, yellow blinking light same error message.

Where are you seeing this error message? The AirPort base stations do not use (or store) your Apple ID and associated password, unless you used it for your Wi-Fi's network name & security password ... bad idea, btw.
A couple of things. Make sure that your personal information for your Apple ID is correct. Now that the Apple ID has two-stage security, if you set this up, be sure that you have everything working properly. I would suggest that you go to the Apple ID support site for additional assistance.

Similar Messages

Airport Extreme - streaming apps error

Hello,
In last two weeks I have problems with one streaming application in my country. It uses mostly port 554. It works cca. 2h30m and then starts to drop connection until I restart router. Everything else works without any problems. Application Developer say that they haven't change nothing in app. I have tried application on three different iPads and iPhones and through web browser (Safari and Firefox on Windows and on OS X). Also a few other users of Airport have the same problems with this application. I have tried to reset all settings, turn off NAT-PMP, change WiFi channel, ... Error happen on WiFi (both and on Ethernet connection.
Is there any chance to make some kind of diagnostics for Airport Extreme (5th Generation). I have try another router (Mikrotik and Linksys) and everything is working without problems on those routers.
I have:
Airport Extreme 5th Generation
Latest Firmware 7.6.4.
TNX, Davor

Is there any chance to make some kind of diagnostics for Airport Extreme (5th Generation).
It is exceedingly hard to get info out of the Extreme.. apple have very little diagnostics or logging even when you use a v5 airport utility I am pretty sure you are not going to see why a particular stream is having issues..
It would require low level look at the firmware.. and apple gives no way to access that.
How brave are you?? You can solder in a serial port and get console output.. how useful that will be I am not sure.. but you might pick up things like memory leaks, CPU overloads, etc.. however that doesn't fix it. In other words having output still gives you no way to repair what the issue is.
If you have not previously had issues and this is setup that has not changed.. let me at least suggest.. downgrading the airport firmware to 7.6.1 .. I find it a heck of a lot better for most of my usage.
In a v6 utility hold down the option key whilst you click the version number. Select the firmware from the list.. it will then downgrade.. you can also upgrade the same way so this is purely a test.
I would then recommend the following changes. Some of this is for Yosemite which is particularly problematic but it may help you as well.. if you upgraded anything to yosemite recently .. that could well be the cause of your problems. Point 5 below about using Link-local only for ipv6 is crucial.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for you as the cable modem SB5102 has no router.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.

Airport Utility cant connect to Airport Extreme Base Station, Error code -4

I am unable to use my Apple-product. Earlier it worked, with these settings: The Airport Extreme Base Station worked as a Gigabit switch and an Access Point. It was not supposed to work as a router, since I have a server "on the far side" of the AEBS.
In any case, it worked for a while. Then it started to act strangely, so I tried to check its settings. I was unable, so I did a factory reset. And haven´t been able to connect (for configuring) since. (It still works as a router and access point, but with the default settings, and with a blinking yellow led.)
When I use the Airport Utility (5.5.1) connected with a cable it finds nothing. Should I be able to configure it wired? When I connect wireless to the default "Apple Network XXXXXX" it finds the Airport Extreme "with default settings". I click "continue" or "Manual setting", and it says "Detecting wireless Apple Devices" (bear in mind that I translate the messages from swedish, It might get wrong), and then after a minute:
An error occurred while trying to access the base station. Make sure your network connection is valid and try again. Error Code: -4
I have shut off the firewall in both Windows and Panda Cloud Office Protection. I have tried to make lots of factory resets.

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Airport Extreme Base Station Error 6742 - Configuration Cannot be Read

I have read the existing posts on this topic, but none of the solutions have worked. I have a Windows XP computer and a brand new Airport Extreme Base Station. When I took the base station out of the box, it would not broadcast a signal, even after configuration. I also noticed that the radio frequency was constantly defaulting to "b", which obviously doesn't make sense with an "n" router. So I checked on this site, and it appeared that I needed a firmware and Airport Utlity upgrade. I did both, and now the configuration is inaccessible. Whenever I try to configure the AEBS, the Airport Utility gives me the following error: "An Error Occurred While Trying to Access the Base Station. Make Sure Your Network Connection Is Valid and Try Again." I know my network connection is valid - I have it connected via ethernet cable and obviously the Airport Utility is detecting the base station in the first place.
Any ideas? Thanks!

If you just bought it I would recommend calling Apple, they can help you set it up.
Also you should consider getting a high speed Internet connection. They are very inexpensive these days and would make your Internet experience much more enjoyable. Where you live I would think you have a choice of DSL (available from most telephone companies) or Cable, which would be the quickest but also more money too.
Regards,
Roger

AirPort Extreme Base Station error? Using Macbook Pro

I am new to all of this and I thought I would be capable enough to set this all up but apparently I am not. HELP! I am trying to create and set up a wireless network using my Airport. I have an AT&T Westell Modem that is using dial up for internet. When I connect the modem directly to my computer I have internet access. The lights on the modem indicate that the ethernet and all other capabilities are working. I plugged in my Airport Extreme after using a cable to connect the modem to the Airport using the Ethernet port. The amber light is flashing and I followed the instructions to setting up my Airport using Airport Utility from the Applications folder. It detects my correct Airport but when I go to update and create my wireless network this error pops up:
Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6737)
My computer is sitting right next to the modem and the Airport. I am not near any metal or any water, and there are no walls or other electronics to interfere. Am I missing something here? Restarting all devices has also proven unsuccessful...Thanks for anything that can help!

If you just bought it I would recommend calling Apple, they can help you set it up.
Also you should consider getting a high speed Internet connection. They are very inexpensive these days and would make your Internet experience much more enjoyable. Where you live I would think you have a choice of DSL (available from most telephone companies) or Cable, which would be the quickest but also more money too.
Regards,
Roger

Airport extreme: Invalid Argument errors over satellite connection

Question 1: Have you observed problems with Apple equipment getting high error rates over high latency connections such as satellite connections?
Question 2: Do you know of any reason why Apple equipment is more likely to exhibit this behaviour?
We have a shack in the country that has a 10Mb/sec satellite internet service. The satellite in question is the Australian NBN service which I believe uses an Optus satellite.
We get frustratingly large numbers of errors from Safari: "Safari can't open the page <insert random url here> The operation could not be completed. Invalid argument."
The message in the browser is always the same. It can take half-a-dozen retries to get a page to display. On average, aroiund 30% of connection attempts yield this error. It seems to be load dependent, and at the moment it is happening less often - maybe one in 10 requests are failing. It is currently 2 Jan, around midday and most Australians near the coast will be at the beach, and those inland have 50 degree temperatures predicted so they will be wallowing in the mud-hole that was once the dam, so I expect the satellite load is rather low.
My ISP says they have around a dozen customers reporting this problem and they all use Apple gear.
Observations:
I was able to open a VPN connection to one of my customers (after several attempts) and the VPN connection worked flawlessly for the duration of hte session which was several hours. Meanwhile, the mrs was cussin' away about invalid argument errors.
Once a page starts loading, it generally finishes. This seems to be independent of the level of complexity. So once a page gets going, it keeps going. Selecting a link from it, however, will likely result in another error.
Pings are returning in around 1 second.
Transfer rate is good - close to the promised 10Mbit/sec. Response time, of course, is aweful compared to a wired or 3G connection. However it is acceptable provided a response is actually received.
Gear is: A couple of netgear routers in point to point mode bridging to the Airport Extreme in the house which is the main router. There are a couple of Airport expresses about the place doing other stuff. Terminal equipment includes iPads x 2, macBooks x 2, iPhones x 2. Everything gets a master reset periodically when the power goes off, and the problem persists. All devices experience the problem.
Thank you for your help

jone1101 wrote:
I have had my airport extreme for over a year and comcast even longer than that. For some reason my airport now says it has a invalid ip address. I plugged my modem directly into my imac and the internet connection is fine. I have power cycled everything multiple times with the same result. I even reset my airport extreme and created a new network. Nothing is working please help!
Does your cable modem have any sort of battery backup that would prevent it from resetting fully during a power cycle?

New 10.3.9 install on Pismo G3, Airport Extreme Base Station Error Network

My 10.3.9 Pismo laptop G3 with built in firewire ports worked perfect on my Airport Extreme Base Station — I just Erased and reinstalled 10.3.9 (it was working before I Erased this morning) and now my Original Airport card can't join my wireless network:
*"There was an error Joining the Selected Network"*
I zapped Pram, reset power manager successfully (date reverted).
I accessed the AEBS by a 10.6.3 Mac Pro and checked the Equivalent Password "WPA Password: ####PW###"
Radio Mode selected: 80211n (80211b/g compatible).
APBS version current: 7.4.2
G3 sees my network as expected.
The APEBS hasn't changed (except for the recent update).
I restarted the AEBS.
Still get the error...HELP!
I saw the exact problem on several archived threads, but no one gave a solution or explained the problem (and I'm going blind here).
Again, for the past two years it was working fine with 10.3.9, it broke this morning after I erased and reinstalled 10.3.9.
10.3.9 is the only software loaded on this laptop.

If you just bought it I would recommend calling Apple, they can help you set it up.
Also you should consider getting a high speed Internet connection. They are very inexpensive these days and would make your Internet experience much more enjoyable. Where you live I would think you have a choice of DSL (available from most telephone companies) or Cable, which would be the quickest but also more money too.
Regards,
Roger

Airport Extreme - PS3 - DNS Error

I've been using the Airport Extreme as my home network router for quite some time but now the PS3 seems to have issues with it. I've run the PS3 in wireless mode for a few weeks without a hassle but then I wanted to use its media capabilities and stream music and films from the shared disk, using a media server. This proved too much for the wireless setup as all media halted once or twice every minute to buffer. I realised I needed to stream heavy media over an Ethernet wire instead so I set that up but suddenly everything became a hassle.
This is my setup:
Router: Apple Airport Extreme
5 computers (one server and four workstations, all PC's)
Sony Playstation 3 (slim)
DHCP doesn't seem to work for some odd reason so I assigned a fixed IP address instead. The PS3 now successfully acquires its IP address but it fails while communicating with the DNS service. So far I have tried this:
1. Specify the router's IP address for primary DNS (secondary unassigned)
2. Specifying my ISP's DNS servers as primary/seconday DNS
3. Specifying two different free DNS servers ("OpenDNS" and another on 4.2.2.1/4.2.2.2)
4. Rebooting broad band modem and router for each of the above experiments
Also, I have tried opening TCP ports 10070-10080 and UDP 10070 (I found that suggestion in some forum post somewhere) but I'm no Airport wizard so I might possibly have done that the wrong way.
None of the above has resolved the DNS problem and now I am out of ideas.
Anyone?
/Jonas

Ok, thanks for clarifying your network configuration. I assume that you have your iMac connected directly to the 802.11g AirPort Extreme Base Station (AEBS) by Ethernet and you want to connect the PS3 wirelessly ... correct?
If so, then we need to double-check the settings for all three devices. Think of DNS as the Internet's version of the Yellow Pages. Without the correct DNS information, a network client will have difficulty locating things on the Internet. Typically, your ISP provides you with the DNS server information using DHCP. In this case your AEBS would need to be configured to be a DHCP client in order to receive this DNS information. In turn, the AEBS also is a DHCP server and will provide this to any network clients (wired or wireless) connected to it. In order for that to work, both your iMac & the PS3 would need to be configured as DHCP clients. Make sense so far?
Since your iMac is getting Internet access, it (most likely) is getting the proper information from the AEBS. I suggest that you note the IP settings on the iMac; you will want to compare these to what the PS3 is getting.
To review the IP settings on your iMac, you will use System Preferences. In order to give you the proper steps to do so, I will need to know what version of OS X you are running on it?

Airport Extreme "default password" error

After resetting Extreme, I cannot rectify the amber light error for "default password in use".
The password is not set to the default.
Have tried various new passwords, but after updating each time nothing changes.
All internet and wireless connections apper to be working 100% - it's just annoying the **** out of me..........

Open AirPort Utility 6.1, click on the AirPort Extreme icon, and click Edit in the window that appears
Click the Base Station tab at the top of the window
Edit out / backspace the Base Station Password and enter a new password. Write that down.
Do the same to Verify Password
Click Update at the lower right of the window and allow 25-30 seconds for the AirPort Extreme to restart
You should have a green light, unless you still have other default settings that need to be changed.

Airport Extreme and Vista Error 6753

I have Airport Extreme. Mac Pro works perfect with AE. However, my vista desktop does not get internet access despite saying I am connected. AE utility stops with "error 6753". Any ideas. Thanks for your input.

Anyone? Bump.

Trying to set up Directv GenieGO using Airport Extreme. Getting error message: DHCP range entered conflicts with the WAN IP Address of your base station. How do I resolve the conflict.

Trying to configure an Airport Extreme manually. After I enter the IP Address of the GenieGo along with the rest of information required I am getting the following error message when I click update:
DHCP range entered conflicts with the WAN IP address of your base station.
How do I resolve the conflict?

You cannot use the same range on LAN and WAN if you are routing.. it must be different.. and you should not be routing at all.
The AE should be in bridge mode. NO DHCP settings at all.

AirPort Extreme amber blinking - error: "Internet Connection"

Hi all,
Just purchased the AEBS last night. I have a somewhat "interesting" setup with my network.
1) My home is prewired with LAN and I'm using a wired (only) Linksys router for this. The reason for this system is in the laundry room and I'm not putting the AP in the laundry room - I can't have a printer there! Also in the laundry room is the cable modem, which feeds into the wired lynksys router.
2) Connected to this wired router, in the office, is the Airport Extreme. I'm using it as a wireless "bridge" - just there to make Wifi (and share my printer).
Here's the issue:
My AirPort works perfectly. I get a connection, I can browse all the other devices on the network, the printer prints perfectly, etc.
EXCEPT : the amber light is blinking and in the AirPort software (Mac) says that there is an error with the "Internet Connection". It tells me that:
"Your base station does not have a valid IP address. Please make sure your base station is connected to your broadband modem or local area network (it is), verify, etc..."
There is one true statement in the description above from the AirPort. It does not seem to have a valid IP address. When I type in Safari 192.168.1.107 - the IP address listed on the main configuration pane, it never finds the page and gives me a "page not found" error.
Moreover, I have an NAS attached to the AirPort which I can access - through the browser interface - perfectly. This NAS is a true NAS - meaning it doesn't connect through a USB port but through a network cable.
Lastly, before you reply with suggestions - thanks so much for that by the way, know that I can't change my network set-up physically - everything needs to stay where it is as of now.
Thanks to all,
Al

Thanks for the response once again! I'm sorry that I wasn't clear in the beginning as I could have been, but here's the deal: I know there are a mutlitude of ways to set up (any) network but mine needs to stay exactly the way it is (physically - in terms of where each router/station is located).
The reason for this, and also the reason why I can't use your suggestion, is the following: if I move the Linksys to the den (from the laundry room), I will have Wifi, but then I lose my ability to have the pre-wired home (with Gigabit) wiring. This is because the den (as does every other room in the house) only has the "output" on wall and no "input" jacks thus I can receive the WAN signals, but can't redistribute them back all over the home (for my wired devices). My laundry room is the home's "hub" where all the wiring comes into and only from here am I able to send out my wired signals to every room in the home.
I can't get rid of my wired connection since I need Gigabit speed.
So now it's back to square one: the AirPort is still blinking amber but is in bridge mode, telling me that it has no "IP address".

Airport Extreme / Apple TV Connectivity issue -HELP!!

I am able to enter my WEP password on the Apple TV, and it connects to my wireless network. But, the next day, it doesn't show up in my list of devices on iTunes. I look at the setings on the apple TV, and it says I am not connected to network, and I have to enter password again. What setting do I need to adjust on the Airport Extreme or the Apple TV?

I have the same issue. Wish I could help.... It is ridiculously annoying to have to put in the password every day, yet it is all I can do!
I dont understand... even if it drops the connection to the TC, why cant it reconnect on its own like computers do?

Airport Extreme, Apple TV and USB Drive Speed?

I've just purchased a new airport extreme and 1.5 TB external hard disk. I figured out how to mount the disk and share it over my home network. I also designated a folder on the disk as my iTunes music folder (I purchased the airport and HD for the express purpose of achieving this set up, because I've accumulated so much media through iTunes that my MacBook Pro's internal disk has long since been full and I've been storing TV shows, movies, etc. on an external drive). The set up works -- BUT it is SLOW, especially when my Apple TV is syncing with iTunes.
Is there an optimal way to set up these connections so that syncing is not so slow?
Any help would be much appreciated!

HI and Welcome to Apple Discussions ...
*"internal disk has long since been full"*
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Carolyn

Airport Extreme, Apple TV and two Expresses

I have a network that runs between the Apple Extreme and the Apple TV. I joined two Expresses to that same network. The Apple TV disconnects now when I play music through the two Expresses.
Should I set up two different networks: Extreme to Apple TV (one network)AND Wireless G Adapter to the two Expresses (a second network)?
Thanks for your help,
Matt

This may work if your assumption (and mine) is that your existing wireless LAN doesn't have enough bandwidth to support an AppleTV and two Airport Expresses.
I assume you are thinking of having one cabled LAN with two wireless access points on it - one dedicated to communicating with AppleTV (using an Airport Extreme N base station) at N-only speeds, and another dedicated to communicating with the two Expresses (could use any wireless router or access point that supports b/g speeds). Yes - that will work and may well solve your problem.

AirPort Extreme Apple ID error

Similar Messages

Maybe you are looking for