Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Hi,
I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old?
Thanks for any help you can provide.
Solved!
Go to Solution.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Similar Messages

Apple Airport Extreme Base Station for PPPoE, DHCP and NAT with ActionTec DSL modem

I just spent several hours trying to track down proper instructions for setting up my Apple AEBS to do the PPPoE, DHCP and NAT while connected to an ActionTec M1000 (no wireless module). It turns out my initial set ups on both devices were correct, but that the order for rebooting and reconnecting the two devices is critical. All of the threads I found on this forum and on many others suggested this was not possible, but it is. What I don't yet know is whether it is the best method for running my home network DSL connection to my ISP (CenturyLink).
The instructions I found that worked come courtesy of Brandon Konkle's blog and are both simple and clear: http://brandon.konkle.us/post/19637529637/centurylink-actiontec-q1000-airport-ex treme-bridge
The proper settings for the ActionTec DSL Modem can be found under Advanced Setup/IP Adressing/WAN IP Address
Click RFC 1483 Transparent Bridging then click on Apply.
(see also http://qwest.centurylink.com/internethelp/modems/m1000/pdf/M1000_BRIDGE.pdf )
To reduce time, do this BEFORE you reset your AEBS then set the AEBS so that you don't have to wait for the AEBS to reboot.
In contrast to what Brandon described for the Q1000 modem, my AEBS never reconnected to the modem (he describes his as getting an IP from his ISP, then dropping it then getting another over and over - mine never got an IP). Once you have reset both devices as described, the critical steps I have not found described elsewhere were:
1. Disconnect the power from both the modem and the Airport Extreme.
2. Disconnect the Ethernet cable between the two devices
3. Restore power to the 2 devices and allow them to fully reboot. For the ActionTec M1000, this is indicated when the lights stop blinking. (Note that the Internet light will NOT be lit in this instance since the modem is acting only as a bridge. You will NOT have an Internet connection until the AEBS is reconnected.) The AEBS will be blinking yellow.
4. Reconnect the Ethernet cable between the devices (make sure on the M1000 that you are using the connector with the circle icon over it, not the arrow icon).
Within about 60 seconds, the AEBS light went to steady green and the connection to the Internet was restored.
Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
Message was edited by: Bud Shaw

Now I have to see if this is a more stable configuration than the flaky one I had before while using the AEBS as a bridge and the M1000 to do everything.
Does anyone think or know if it will make a difference?
No one can accurately predict in advance what the actual results might be. I've tried both ways with different products and cannot say that one method is better than the other. What works is best.
In theory, it is preferable to have the modem provide the PPPoE connection service since it is the device connected directly to the Internet.
In practice, results vary depending on the service provider, products used, phase of the moon, alignment of the planets, etc.

Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

Airport Extreme Base Station as bridge for Westell DSL router

I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
Here is the situation (I rent so chances are we will not be moving hardware anywhere):
- Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
- One lonely Powermac G4 upstairs that does not have a wireless card
- One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
I don't understand why the AEBS seems unable to see the DSL network.

Hi,
Well, what I have been able to do is this:
I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
Anyway, I digress...
What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
Best regards,
Patrick
Macintosh G5, Powerbook G4 Mac OS X (10.4.7)

Toshiba 4015 , Linksys wpc11 , Extreme Base Station cannot connect! Help

I have one IP address coming into a wired router(linksys bsr41), The router has two good ports. I go directly from one port to a homemade pc and to the airport extreme base station with the second. I have a mac mini wired to the port on the base station. I use imac g5 wirelessly with no problems.
I am trying to set up a Toshiba 4015 CDS to use wirelessly on my deck and I am having a lot of trouble. The Toshiba is upgraded to win 2000 and has 160 meg Ram. I am attempting to connect to the base station with a link sys wpc 11 wireless - b card. I have tried to change numerous setting on the base station but with no luck. I have power to the card but no link. I have used the linksys utility and it can't see the aebs and have tried a 3rd party utility recommended by linksys(freescape????) but it cannot see the base station either. Any suggestions would be greatly appreciated.
I connect through dsl. Thanks, Mike

When I connect cable to the lan port , I cannot connect with dhcp or with dhcp disabled.
I tried both... restarting aebs and imac wireless and could not connect. When I disable dhcp I am forced to enter manual settings and I am not sure I have correct Ip address since it is behind my router. My internet provider said my base station would have to be behind the router because of a cloned ip address. I am not quite sure what that means. Thanks again for the help.....I have a xmas party to go to but will try further recommendations when I get home.

Using AirPort Extreme Base Station to Connect a Hard Drive

I have a wireless network set up using a wireless device provided by my network provider. What I would like to do is to use my Airport Extreme Base station only to connect a hard drive to it. However when doing so, Airport Utility does not recognize or see the Extreme. The Extreme can only been seen if connected to the router provided by my network provider. How can I set up a wireless hard drive or printer with the Extreme without connecting to the network?

Samir, why you wanna use service provider wireless instrument when you have world class wireless device
you don't need 2 wireless ???
I am not expert but I used common sense, I had linksys N series router but recently I bought TC 1TB
so what I dumped my N router in store and went ahead with TC installation, Trust me it took me 10 minutes to configure my 4 HDD 5 computer printer etc with TC
I am sure you have a ethernet modem too separate from your wireless instrument
try to do a clean installation ( thats where all these people who has problem, trying to connect to their existing network
try setting up your AEBS as fresh wireless device connect to your modem and run Airport Utility
I am sure you will be a happy apple customer
good luck

ANOTHER Airport Extreme base station dropping connections

I think my network connectivity problems predate the latest Airport software update by a few days.
Our MacBook Pro's randomly drop an Airport connection when they are near a secondary access point operated in Bridged Mode.
My one-year-old Airport Extreme/Time Capsule had been working fine in 2.4GHz b/g/n mode with a gigabit switch and a link to a Comcast cable modem, all set up in the northwest corner of the house. I decided to replace it with a new, dual-band Airport Extreme/Time Capsule so that we could separately operate a faster 5GHz "n" network for modern notebooks along with the 2.4GHZ b/g/n network for older notebooks and iPhones.
We substituted the new Airport Extreme/Time Capsule for the old model and it now serves IP addresses to 5GHZ network devices. The old Time Capsule was moved to a new location in the southeast corner of the house, connected to the network via Cat 6 Ethernet, and also set it up to join the same 5GHz wireless "n" network in Bridge Mode -- it is an access point, but not serving DHCP addresses.
Now, whenever a laptop is near that device, it accesses the LAN through that Airport Extreme's 5GHz WIFi connection. The problem is this: every few hours (though sometimes sooner - its random), our MacBook Pro's lose their network and Internet connections (not simultaneously though). This only happens if the laptops are physically closest to the older, Bridged wireless access point. It can happen in the middle of Web surfing and always, when they wake from sleep. It NEVER happens if the notebooks are physically closer to the new Airport Extreme (and hitting it's 5GHz signal) and the iPhones NEVER lose their Internet connection to the separate 2.4GHz b/g/n network.
When it does happen, we have to Restart the notebooks to re-establish an Internet connection, though I suppose restarting the Airport Extreme/Time Capsule also might re-establish the connection. Sometimes, I can just move my laptop back to the northwest corner where the main Airport Extreme/Time Capsule is located and get right back online through that access point. But usually, I just sit in the back room, restart and rejoin the network through the secondary, wireless access point. Turning off/on Airport (at the MacBooks) accomplishes nothing and neither does Network Diagnostics.
This affects two new, MacBook Pro "n" laptops running 10.5.8, but does not affect the iPhones. So, it only seems to be a 5GHz issue. I don't think it's RF interference because I've tried three different 5 GHz channels. I've also tried reducing the secondary Airport Extreme's transmission power to 50% and, more recently 25%, to no avail.
This morning, it started happening again, so I finally used the Airport Utility to turn off the Wireless Mode of the secondary device for my next test (thanks to the Ethernet connections, it's still visible on the wireless network). We'll see if this solves the wireless connectivity problem.
Does anyone have any idea what could be causing this? I wonder if it is some odd, configuration issue.

I just started having a similar problem in the last week. I have three devices: the Gigabit AEBS is connected to my cable modem and is the DHCP server. An Airport Express (N) extends the wireless network. A second (G-Only) Airport Express is connected to one of the gigabit ports on the AEBS and creates a second wireless network for iPhone, G-devices and guests.
Lately, the connection from my May 2009 MacBook Pro has started acting strange. The Airport icon in the menubar shows I have full signal strength, but I'm no longer connected to the Internet and I can't browse other N computers on the network. Devices that are connected via the G network continue working fine and remain connected to the Internet. This is interesting because even the G network has to go through the AEBS to get to the Internet. It only appears to affect the Internet connection via the AEBS's own WiFi but not its ethernet ports. If I open Airport Utility from the MacBook Pro, the AEBS status shows as Normal. Turning off/on the Airport on the MacBook accomplishes nothing but I can restart the AEBS from the Airport Utility and then everything goes back to normal. A few hours or more later, the problem occurs again.
By holding the Option key when clicking on the Airport icon and looking at the Airport MAC address I can tell that the MacBook Pro is connected to the WiFi-N via the Airport Express extender. Like you, I may have to try and shut that one off and see if the problems occurs when it is connected directly to the AEBS. The problem with that is that since it is farther away in the house, the signal strength and thus my transmit rate will be slower. I'd be curious to see if your experiment by shutting down your secondary AE will still cause drops.

Airport extreme base station cannot get a workable IP address

I see this is not a new issue, but I haven't been able to find a solution from any of the discussion or FAQ's that works. My internet provider is Comcast. All of a sudden my airport base station could not secure a workable IP address. Resetting, powering off, etc., did not fix the problem. I thought it might be with my base station, the saucer type, so I bought a new one. Same problem. If I bypass the router and plug directly into the computer there is no problem the computer connecting directly from the modem works fine. Does anyone have a solution to this? Thank you for your help.

I am having a similar problem. I just purchased a Time Capsule with airport/router built-in. I setup it up 2 days ago and it was a breeze. My iMac, Macbook Pro, and 2 iPhones connect to it wirelessly via DHCP with no problems. Suddenly this morning my Macbook Pro and 1 iPhone cannot get an IP address, other than the dreaded 'Self-assigned' 169... address. I can get an IP with my Macbook Pro connected via Ethernet with no issues. I did not change ANY settings. How is this possible? Also, I have a guest network setup on the second band and all of my devices can connect to that with no trouble, even the said Macbook Pro and iPhone. iMac has been connecting all along to everything. I've tried the following on the Macbook:
- Removed Airport, rebooted, re-added Airport, rebooted
- Forced a manual IP address (yes outside the range of DHCP reserved addresses)
- Removed power / rebooted Time Capsule
Nothing works. I know my wireless card is fine because I can get an IP from the guest network. What gives?

Airport Extreme Base Station to connect MacBook Pro to internet?

With a new MacBook Pro do I need an Airport Base station or something other purchase (product) to connect to the internet wirelessly while I travel?
Thank you very much in advance for your time in this matter.

Duane is correct.
The wireless is built in. Whoever you are connecting to will have a base station. If you want wireless at home you need a base station connected to your internet connection.
Good luck.

Airport Extreme Base Station cannot see with Macs

Out of the blue my Macs are experiencing a problem seeing the base station network. I can see it with my iPhone. I have a PowerMac G5 duel core 2 Ghz and cannot see the base station or it is sporadic. System says that the airpot card is recognized on my G5. Other Macs on network experiencing the same issue. Tried turning everything off and restarting. This only works part of the time.
I am on Cox cable service using the modem then the airport. Any suggestions? Thanks for any help in advance.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Airport Extreme Base Station Losing Connection To USB Hard Drive.

I bought a new 5th gen AEBS and installed it yesterday updating the firmware to latest version and enabling the 300mbps 5GHz access point.
I formatted a 2.5" USB hard drive to Mac OS Journaled and connected it via USB.
Last night I transferred GBs of data with no problems. However I copied my iTunes media over night, and this morning it stated that it lost connection to the drive.
I since cannot connect to the drive again without disconnecting the USB drive and reconnecting it.
This seems to be a common problem with no evident fixes. Has anyone got a reliable connection out of this device?
I was using a MacBook Pro 2010 on SL.
If not then I suppose I might send this back and get a dedicated NAS.

I just found this thread - I am not sure the energy saver option will apply to non 'local' hard drives, i.e. the hard drive connected to the AEBS.
https://discussions.apple.com/thread/3616812

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

Using Airport Extreme base station as wireless Cable router and airtunes.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
I would like this if it is a wireless standalone router as I want to but a pair of wireless airtunes router for music around the house keeping the Airport Extreme in my room where the airtunes routers would not be as I have the computer in my room and I have iTunes right there and would not need the airtunes routers in my computer room.
Leon.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
The AirPort Extreme Base Station (AEBS) does NOT have a built-in DSL/Cable modem. You will still require a Cable modem in order to access your ISP's Internet service.
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
The AEBS IS a wireless router, but it is NOT a combination wireless router & cable modem.

Cannot Connect Airport Express to Airport Extreme Base Station

I have just purchased a new Airport Extreme Base station and have it configured and running properly.
I would like to use my Airport Express to play Air Tunes and have tried to join my Airport Express's network. I have not managed to get this to work.
I have tried to configure the Airport Express manually and in Assist Me mode but every time it reboots to reconfigure the unit, it continues to flash amber. I have done numerous hard resets and followed the methods discussed in other posts but cannot get the unit to connect.
I am running the latest firmware on both units.
Has anyone solved this problem? If so, please help!

Shallers...you are not alone.
I spend several hours this past weekend trying to get a brand new Express to work with a brand new Extreme station using all Apple computers.
Still no luck, after a gazillion permutations.
I really like the Extreme, it works very well, even with non-Apple devices.
The Express is going back....gawd awful thing from the Darkness.

Wirelessly Connecting HP Laserjet P3015 to Airport Extreme Base Station

Hi, I just purchased a new Airport Extreme Base Station, and was able to establish an internet connection to it. I'd like to find out if it's possible to connect the HP Laserjet Enterprise P3015 to the Extreme, wirelessly rather than via a USB Cable. I've looked at the HP page for this printer, but I'm baffled by all the lingo. I believe it's a newer model of HP printer (or maybe it isn't?) but I bought it new from HP recently.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=S upportFAQ&lang=en&cc=us&docIndexId=64178&taskId=101&prodTypeId=18972&prodSeriesI d=3815797&printver=true#10
Is there a term for the type of printer that can be wirelessly connected? Should the printer, by default, give off a signal that I can pick up? I don't see anything popping up in Airport Utility 6.3
I'm using OS10.7.5 by the way.
I'm off to post a message on the suitable HP forum (if I can find it ) but I'm so used to the Apple Community knowing what's what, that I was hoping that some kind soul here might just have experience with this.
Thank you.
PS. From what I can understand from the "Trouble-shooting FAQ," wireless printing is possible, but I just don't see an option for syncing it up with a MAC? Maybe it only works with Windows?

wuzradioman
I don't see where the P3015 printer is wifi capable. Therefor, you cannot use wifi to directly communicate with it.
Thanks for the reply Wuzradioman. I dug around (several) of HP's sites and it looks like the info was slightly different for the same printer listed on both the Home and Business sites. I did find a link on a 3rd HP page (which I've since misplaced!) that indicates that the P3015 requires a wireless card to be installed. But when I clicked the link for "accessories and additional hardware" a link to the card was nowhere to be found. I'll try to dig up that link in the event that some other poor soul has the same printer and a similar question.
Vernon Alexander
I find the HP printers (they're called wireless printers by the way) to be cumbersome to connect wirelessly. there's a lot of manual work involved that can be time-consuming. For example, I found it incredibly irritating to enter the wireless access passcode.
Thanks for the reply. After talking to some other people, this seems to be the consensus on wireless printing. I guess there's a reason, esp. in enterprise environments, that printers are often hard-wired.
Bob Timmons
you can run an Ethernet cable over a much longer distance than a USB cable, so Ethernet might be the best option, and the one I would prefer.
As far as wireless, If you connected an AirPort Express to the printer and disguised it near the printer, then you could locate the printer anywhere you want and have it connect using wireless to the network.
Instead of installing a wireless "card" inside the printer, you use an outboard device to accomplish the same task.
Thanks Bob. I did end up hooking up via a Cat-5e cable from printer to Airport Extreme base. Previously, I had the printer hooked up via USB cable (at a shorter distance) to my Airport Express, which the Extreme now replaces.
Unfortunately, I can't seem to get the HP Laserjet P3015n printer recognized after having connected it via Cat5e cable to the Airport Extreme. 1) there's still somethign about it being attached to the old Airport Express (which is now used to extend my network. 2) The P3015 is identified as a P3010 - which is a carry-over from when I had originally set up the printer on my (then) main base station which was the Airport Express. I didn't (or rather "stopped") questioning the fact that the P3015 was recognized as a P3010 just because it was the only way I could get the printer to be recognized at the time.\\
But I suppose this new challenge merits a separate thread, which I'll start after I do a search of the support forums. Maybe there's something obvious I'm not doing to get the printer sorted out.

Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Similar Messages

Maybe you are looking for