Airport Extreme base station does not appear in Airport Utility

I cannot see the basestation that I am connected to via WIFI or Ethernet. I cannot see the basestation on ipad or iphone app either. Basestation is working fine and i have connection working fine with a green light but cannot configure the basestation to allow guest networks or connect my external storage drive.
any suggestions will be appreciated.

OK. That should be a third or fourth generation Extreme, plenty new enough. (The most recent OS X and iOS versions of AirPort Utility cannot configure the original Extremes, but they can handle my mid-2007 second generation Extreme.)
If two or three devices on the same network as the Extreme cannot "see" the configuration interface, I would guess that the problem lies in the Extreme itself.
Have you tried power cycling the Extreme?
Did you purchase AppleCare for your 2011 MBP? If so, and if you bought the Extreme less than two years earlier, the AppleCare should cover the Extreme also.

Similar Messages

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

My Airport Base Station does not appear in the Airport Admin Utility

I cannot see my airport extreme base station in the Airport Admin Utility nor in Airport Setup Assistant via Airport. It worked yesterday but when I was trying to set up a network something must have changed but I don't know what it is. (The setup didn't work so I am only using one base station right now.) The only way I can configure/reconfigure the base station is by physically connecting via an ethernet cable. Then no problem. I have two computers and neither can access the base station with Airport Admin Utility via Airport. I have installed the latest Airport Update but nothing has changed. What happened?

You should be able to use the second Airport Extreme
Base Station as a wireless print server. What I
suggest you do is:
1. run the Airport Admin Utility and clean up
settings on your existing Base Station:
- under the Airport tab, make sure you have not
selected to "create a closed network"
- under the Access Control tab, clear out all
settings
- under the WDS tab, clear out all settings
- under the Network tab, make sure the box is checked
to "Distribute IP addresses" and "Share a single IP
address using DHCP and NAT".
- update settings to the Base Station if you changed
anything.
2. do a hard reset of your second base station per:
http://docs.info.apple.com/article.html?artnum=107451
3. for now, put both base stations and the Mac in the
same room. Run the Airport Setup Assistant, and use
its guidance to configure the second base station as
a new base station that "extends" the wireless
network of your main base station.
That should do it.
Thanks very much. The printer works great from both computers via my second airport base station. And I can see both my base stations in the Airport Admin Utility.

Airport Extreme Base station does not 'see' Airport w/Airtunes. HELP!

I just purchased and installed an Airport Extreme Base startion (802.11n), and it does not 'see' my Airport Extreme with Airtunes. I have already tried re-setting the Airport + Airtunes to the factory settings, but since I installed the new Base station software, I no longer have the Airport Express Sett up assisstant?!?
What am I doing wrong?

Your Mac won't be able to communicate with your Airport Express until you reconfigure your Airport Express to join the wireless network now being created by your new Airport Base Station.
The "Airport Setup Assistant" has been replaced by the "Airport Utility". You can find that new utility installed in your Mac's Applications->Utilities folder.
What you should do now:
1. do an factory default reset of your Airport Express.
2. plug the Airport Express (temporarily) into power in the same room as your Base Station and your Mac.
3. on your Mac, run the Airport Utility. It should "see" your Airport Express. Click on the Airport Express icon, click to continue (your Mac will switch wireless networks temporarily), click Continue, and follow the instructions for configuring the Airport Express so that it "joins" the existing wireless network created by your Base Station.

Time Capsule base stations does not appear in AirPort Utility

I can't see my Time Capsule in Airport Utility 6.3.2. on Mavericks. And I can't access the Data volume for Time Machine Backup. The Internet is working!
However I can see it the Time Capsule on my iPhone's Airport utility.
I have tried rebooting Time Capsule a few times, didin't help.

OK. That should be a third or fourth generation Extreme, plenty new enough. (The most recent OS X and iOS versions of AirPort Utility cannot configure the original Extremes, but they can handle my mid-2007 second generation Extreme.)
If two or three devices on the same network as the Extreme cannot "see" the configuration interface, I would guess that the problem lies in the Extreme itself.
Have you tried power cycling the Extreme?
Did you purchase AppleCare for your 2011 MBP? If so, and if you bought the Extreme less than two years earlier, the AppleCare should cover the Extreme also.

HT3500 I am trying to hook up my new Canon MG5320 printer wirelessly to my MacBookPro with OSX.8.2. The Airport Extreme Base Station does not have a WPS button and so I seem to be stymied even though the printer detects the Airport Extreme. Suggestions?

I am trying to set up my new Canon MG5320 printer to my wireless network. However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions. I am using OSX.8.2. Suggestions please!

If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.

Airport base station does NOT deliver a solid connection!

I have an older Airport base station (an extreme-square, flat, white, you know the one). Ever since I installed the most recent firmware update I get next to no data flow through from the provider. If I connect direct to the provider router via ethernet cable I get amazing connectivity speeds. I change the set up to connect via the Airport and I get either no connection or 5 KBS.... a speed, when it available is a joke. While trying to run through the Airport my Airport signal is full strength. It appears the base station does not know how to digest and dispense the information from the service provider into a full band of connectivity. The problem exists with both Apple laptops in the house. I have done all the required resets and restarts and to no avail. Connecting direct, which is a HUGE hassle, provides amazing speeds. I had none of these issues before I did the firmware update about three days ago (about 12.18.09). Any thoughts or directions to help me out?
Thanks!

Your Express requires an IP address to be issued by the device connected to its WAN port, in most cases that is a cable modem.
Power down your modem and let it rest. Leave it powered down, connect it to your AirPort Express, then power it back up again. This permits the modem to supply the Express the IP address it needs.
Like it says, if you still can’t connect, contact your Internet service provider.

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Airport Extreme connected drive does not appear in Time Machines drive list

I have two Macbook Pros. Both have 500GB hard drives. I have an airport Extreme with a WD terabyte hard drive and a HP printer attached via USB cable. Both Macbooks can access the WD HD & internet.
One MacbookPro has time machine set up to use the Terabyte HD as backup.
I want the other MacbookPro to also use this terabyte drive for backup.
But when I try to set up Time Machine to use the drive, the drive does not appear in the backup drive list.
What can I do to fix this? I had a HD crash on the non-backed up Macbook recently. I desperately need it to be backed up!
Any ideas?

Does the drive show in Disk Utility? Try a restart.

HT1238 ipod shuffle 2nd generation does not appear in Reset Utility window.

Hi there! I'm seeking some advice for repairing an old ipod shuffle.
My mom's 2nd generation iPod shuffle suddenly will not appear on her computer. She is using windows vista (sad face). I ran all the reccommeded troubleshooting suggestions, but still can't repair the disk.
When connected to the original computer (windows vista), the charging light comes on but the disk does not appear anywhere on the computer. I ran the diagnostics and it apparently has the most updated software, but there is another unspecified error.
When I tried to run the repair suggestions on my own computer, i can't get the disk to show anywhere....the charging light will not even come on.
Any other suggestions I might have overlooked?

but there is another unspecified error.
What is that error?
Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
B-rock

Base station does not show in airport utility

How do you display a base station in the airport utility?

Sorry, but an "older" one does not tell us much about which model that you have....since there are about a dozen different base stations which might be called "older", and the tips and tricks are different depending on what model that you have.
If you do not know the model number, please look on the bottom of the base station. The model number starts with an "A" followed by four numbers. Depending on what model that you have, It might be found on a label, or it might be embedded in the foam pad. Post back with the model number.
You did not answer our question regarding what version of AirPort Utility that you are using. We need that information to be able to help. If you have a Mac, open AirPort Utility and click on the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility and post back with the version number that you see there.

AirPort Extreme Base Station is not Available in AirPort Admin Utility

I don't see my APEX Base Station in the list in AirPort Admin Util. I can configure by opening by IP. I have no software firewall. I have plugged in directly to base station, and have reflash with 5.7 firmware. I am using 4.2 of AirPort Admin. I've Tried everything I can find in forums. Anyone else have issues?
I'm using Mac OS 10.4.4

I have tried resetting it. It doesn't always work. Sometimes the base station is listed, and sometimes it is not. The base station is functioning though. I can access the newtork, It just doesn't show up in Admin Util.
I also have an AP Epress connected to AP Extreme via WDS. From the wired side, they either both show up or both do not, which is expected. When they don't show up on the Admin list, the Express also doesn't show up in iTunes from the wired side. Wireless clients don't seem to exhibit this problem.

Airport Extreme Base Station is not picked up by my Mac Bok Pro

I purchased a Airport Extreme Station, set it up, and everything worked fine.
We had a power outage and since then neither my Macbook Pro nor my other laptop sees the base station. I hard reset the unit, still no response. I hooked up the the base station to my Macbook Pro with the straight-through ethernet cable and yes there it was.
After I unplugged the cable, the airport could not locate the base station again. I have the latest firmware upgrade and Airport software upgrade.
I am running out of options and ideas - any help?
Message was edited by: marbmarc

Perhaps try downloading the latest update and reload it into the Extreme. It is possible that something was corrupted during the power outage that is causing things to be a little bonkers. Use the Search in the top right of this window and look for "Airport Extreme Firmware". You may have to dig a little bit to find the most current but its there. Download it and install while connected via ethernet.

Encrypted HDD does not appear in Disk Utility or Finder or Terminal

I recently reformatted a 320 GB external HDD as Encyrpted, Journaled HFS+ using Mountain Lion. For several weeks, it worked flawlessly. I was able to back up financial documents with the security of disk-level encryption. When connected, the drive would mount and prompt for password (as expected).
Then one day I knocked against my desk while the drive was connected, pulling the FireWire cable out of the external HDD. It lost power and disconnected, causing the error message about disconnecting disks before ejecting them.
I immediately plugged it in and attempted to find it. Unfortunately, it didn't appear in Finder. It didn't appear in Disk Utility. It didn't appear in /Volumes or on diskutil list. I haven't been able to get it since then.
I have:
A) Restarted with HDD attached
B) Restarted without HDD attached
C) Connected with a different FireWire cable, then tried connecting with a USB cable
C) Run "Repair Disk" on my main internal HD while in Recovery Mode, without and then with HDD attached
D) Tried connecting to other Macs, using combinations of Lion and Mountain Lion, FireWire and USB
Does anyone have any additional tricks to try? The data is backed up, so it's ok if I lose it. But I would love to unbrick this drive that I purchased before considering it useless.

Apple Support article:
USB and FireWire Troubleshooting
Firewire Device not Working

Airport Extreme base station does not appear in Airport Utility

Similar Messages

Maybe you are looking for