Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

Similar Messages

Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Hi,
I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old?
Thanks for any help you can provide.
Solved!
Go to Solution.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Using AirPort Extreme Base Station to Connect a Hard Drive

I have a wireless network set up using a wireless device provided by my network provider. What I would like to do is to use my Airport Extreme Base station only to connect a hard drive to it. However when doing so, Airport Utility does not recognize or see the Extreme. The Extreme can only been seen if connected to the router provided by my network provider. How can I set up a wireless hard drive or printer with the Extreme without connecting to the network?

Samir, why you wanna use service provider wireless instrument when you have world class wireless device
you don't need 2 wireless ???
I am not expert but I used common sense, I had linksys N series router but recently I bought TC 1TB
so what I dumped my N router in store and went ahead with TC installation, Trust me it took me 10 minutes to configure my 4 HDD 5 computer printer etc with TC
I am sure you have a ethernet modem too separate from your wireless instrument
try to do a clean installation ( thats where all these people who has problem, trying to connect to their existing network
try setting up your AEBS as fresh wireless device connect to your modem and run Airport Utility
I am sure you will be a happy apple customer
good luck

ANOTHER Airport Extreme base station dropping connections

I think my network connectivity problems predate the latest Airport software update by a few days.
Our MacBook Pro's randomly drop an Airport connection when they are near a secondary access point operated in Bridged Mode.
My one-year-old Airport Extreme/Time Capsule had been working fine in 2.4GHz b/g/n mode with a gigabit switch and a link to a Comcast cable modem, all set up in the northwest corner of the house. I decided to replace it with a new, dual-band Airport Extreme/Time Capsule so that we could separately operate a faster 5GHz "n" network for modern notebooks along with the 2.4GHZ b/g/n network for older notebooks and iPhones.
We substituted the new Airport Extreme/Time Capsule for the old model and it now serves IP addresses to 5GHZ network devices. The old Time Capsule was moved to a new location in the southeast corner of the house, connected to the network via Cat 6 Ethernet, and also set it up to join the same 5GHz wireless "n" network in Bridge Mode -- it is an access point, but not serving DHCP addresses.
Now, whenever a laptop is near that device, it accesses the LAN through that Airport Extreme's 5GHz WIFi connection. The problem is this: every few hours (though sometimes sooner - its random), our MacBook Pro's lose their network and Internet connections (not simultaneously though). This only happens if the laptops are physically closest to the older, Bridged wireless access point. It can happen in the middle of Web surfing and always, when they wake from sleep. It NEVER happens if the notebooks are physically closer to the new Airport Extreme (and hitting it's 5GHz signal) and the iPhones NEVER lose their Internet connection to the separate 2.4GHz b/g/n network.
When it does happen, we have to Restart the notebooks to re-establish an Internet connection, though I suppose restarting the Airport Extreme/Time Capsule also might re-establish the connection. Sometimes, I can just move my laptop back to the northwest corner where the main Airport Extreme/Time Capsule is located and get right back online through that access point. But usually, I just sit in the back room, restart and rejoin the network through the secondary, wireless access point. Turning off/on Airport (at the MacBooks) accomplishes nothing and neither does Network Diagnostics.
This affects two new, MacBook Pro "n" laptops running 10.5.8, but does not affect the iPhones. So, it only seems to be a 5GHz issue. I don't think it's RF interference because I've tried three different 5 GHz channels. I've also tried reducing the secondary Airport Extreme's transmission power to 50% and, more recently 25%, to no avail.
This morning, it started happening again, so I finally used the Airport Utility to turn off the Wireless Mode of the secondary device for my next test (thanks to the Ethernet connections, it's still visible on the wireless network). We'll see if this solves the wireless connectivity problem.
Does anyone have any idea what could be causing this? I wonder if it is some odd, configuration issue.

I just started having a similar problem in the last week. I have three devices: the Gigabit AEBS is connected to my cable modem and is the DHCP server. An Airport Express (N) extends the wireless network. A second (G-Only) Airport Express is connected to one of the gigabit ports on the AEBS and creates a second wireless network for iPhone, G-devices and guests.
Lately, the connection from my May 2009 MacBook Pro has started acting strange. The Airport icon in the menubar shows I have full signal strength, but I'm no longer connected to the Internet and I can't browse other N computers on the network. Devices that are connected via the G network continue working fine and remain connected to the Internet. This is interesting because even the G network has to go through the AEBS to get to the Internet. It only appears to affect the Internet connection via the AEBS's own WiFi but not its ethernet ports. If I open Airport Utility from the MacBook Pro, the AEBS status shows as Normal. Turning off/on the Airport on the MacBook accomplishes nothing but I can restart the AEBS from the Airport Utility and then everything goes back to normal. A few hours or more later, the problem occurs again.
By holding the Option key when clicking on the Airport icon and looking at the Airport MAC address I can tell that the MacBook Pro is connected to the WiFi-N via the Airport Express extender. Like you, I may have to try and shut that one off and see if the problems occurs when it is connected directly to the AEBS. The problem with that is that since it is farther away in the house, the signal strength and thus my transmit rate will be slower. I'd be curious to see if your experiment by shutting down your secondary AE will still cause drops.

Airport Extreme Base Station to connect MacBook Pro to internet?

With a new MacBook Pro do I need an Airport Base station or something other purchase (product) to connect to the internet wirelessly while I travel?
Thank you very much in advance for your time in this matter.

Duane is correct.
The wireless is built in. Whoever you are connecting to will have a base station. If you want wireless at home you need a base station connected to your internet connection.
Good luck.

Airport Extreme Base Station Losing Connection To USB Hard Drive.

I bought a new 5th gen AEBS and installed it yesterday updating the firmware to latest version and enabling the 300mbps 5GHz access point.
I formatted a 2.5" USB hard drive to Mac OS Journaled and connected it via USB.
Last night I transferred GBs of data with no problems. However I copied my iTunes media over night, and this morning it stated that it lost connection to the drive.
I since cannot connect to the drive again without disconnecting the USB drive and reconnecting it.
This seems to be a common problem with no evident fixes. Has anyone got a reliable connection out of this device?
I was using a MacBook Pro 2010 on SL.
If not then I suppose I might send this back and get a dedicated NAS.

I just found this thread - I am not sure the energy saver option will apply to non 'local' hard drives, i.e. the hard drive connected to the AEBS.
https://discussions.apple.com/thread/3616812

2 airport extreme base stations later and still no internet connection-

Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.

http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will.

Several PC and Mac connectivity issues with Airport Extreme Base Station

Hello,
This is not all necessarily airport base station related, but there is some crossover, so I'm posting all of these issues...
Here is the laundry list of things that I can't make work in a home network that contains a PC w/ XP Home, MacBook 1.83 w/ 10.4.7, and Airport Extreme Base Station w/ Modem.
1. Can't see the PC from the Mac.
a. "Connect to server -> Browse" does not find the PC
b. "ipconfig" on PC provides valid looking IP address
c. ping from mac to PC IP address times out
d. Firewall on XP is disabled via control panel
b. Windows file and printer sharing is enabled
2. Can't see mac from PC
a. Windows file sharing enabled on mac
b. Firewall on mac disabled
c. I used \\MacIPAddr\shortusername
d. ping times out
3. Using dial-up to access internet, how do i tell airport to dial using PC?
a. this feature is working fine from mac
b. If already connected (via instruction from mac), can surf the internet fine from PC
c. Is this even possible from the PC?
4. Can't see printer connected to base station from PC
a. See it fine from mac
b. How do i "find" the printer on the PC?
c. Is Bonjour required for this? (I don't have it on the PC yet)
5. Can't see a "shared" printer on the PC from the mac
a. printer is connected directly to PC
b. Mac's add printer wizardry looks like it may "see" the printer, but then it asks for username and password for PC. This is XP home, with no usernames or passwords. Single user. Nothing seems to work in the credentials pop-up dialog.
Any suggestions on any of these issues is very welcome.
Thanks

Is the PC running any kind of internet security or firewall software?
1. Can't see the PC from the Mac.
2. Can't see mac from PC
Sharing files between an XP PC and a Mac running OS 10.4.x
http://www.ifelix.co.uk/tech/3020.html
3. Using dial-up to access internet, how do i tell
airport to dial using PC?
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com
4 . Can't see printer connected to base station from
PC
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
5. Can't see a "shared" printer on the PC from the
mac
Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Mac Book pro can't connect to Internet through Apple airport extreme base station

I had problems connecting to the internet in the past with my macbook pro. One day it suddenly started working again but then I bought a second apple TV I lost connectivity. I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet. When I hooked up the new Apple TV that I bought it booted my computer from it's ip address. The apple TV though wouldn't work and now nor would my computer. I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not. Even if I plug in the ethernet cable from the base station it doesn't work. It show that it has a self assigned IP address. After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet. If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine). When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router. I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet. Can you please help me trouble shoot this?
I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

It has something to do with the connection from the base station to my computer
I don't think so..
I just posted a reply which totally vanished.. strange strange website now.
Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
Please tell us what modem you use.. is it a router??
If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
You need to also give us the screenshot of the IP you are getting in a computer that works.
EDIT
Sorry this is half double post.. the previous page refused to display.. now it has returned..

Wireless connection to internet with mac pro tower and airport extreme base station?

Hi, I have an airport extreme base station and a mac pro tower without a airport card. My internet wireless router is a great distance from my computer so I can't connect the base station directly to the router. I've attached the airport extreme base station to the tower via an ethernet cable, the base station seems to be wirelessly connected to the home network but the browser is showing "not connected".
Please help.
Thanks

Shouldn't the Airport base station be able to connect to it wirelessly?
It might be possible, but the Ethernet ports on the AirPort Extreme would not be enabled, even if it did connect to the Thompson' WiFi signal.
As Tesserax notes, among the Apple routers, only the 802.11n versions of the AirPort Express have the capability to "join" a wireless network with the Ethernet port being enabled.

This Airport Extreme base station can't connect to iCloud

I have a Airport Extreme base station (model A1408) running firmware 7.6.4.
In troubleshooting a Back to My Mac issue, I noticed that the configuration page for the base station had a yellow dot next to my apple id in the "Back to My Mac" section of the "Base Station" tab, with words underneath that say, "This Airport Extreme base station can't connect to iCloud".
When I delete the id and re-enter it, the dot goes green and no errors are generated (the id/password tokens are accepted). Then, I push "Update", and after the base station comes back, the light is yellow again. (To be clear, the dot next to the apple id is yellow, not the base station status light, which is always green.)
I'm connected to Xfinity Cable Internet service via a Motorola SB6141.
Everything iCloud related works for my various iOS and MacOS devices except Back to My Mac.
Can anyone point me to a solution? I've already been through Apple's troubleshooting and support docs related to Back to My Mac.
Thanks in advance!

NEVER MIND!
After reverting to the old LinkSys router, I left the AEBS powered up all night. This morning, I tried once again and the AEBS mysteriously started working with my laptop after reconnecting and power-cycling the cable modem. Go figure!
Unfortunately, the iMac in another room doesn't seem to be able to join the new network, but I'll close this thread and perhaps open a new one after doing some more trouble-shooting.
Thanks for your comments and suggestions.
-- Mike

Connecting Airport Extreme Base Station and HiTron CGN3

A recent installation of Internet/CableTV services by Rogers.ca replaced my Airport Extreme Base Station WiFi network with one based on the Hitron CGN3 Cable Modem/Router. Many of the WiFi enabled evices in the home were switched to the new network without too much hassle. However, my multiple NEST CO/Fire alarms failed to connect and after some hunting I established that the CGN3, although apparently ipv6 'compatible' has this protocol not enabled. There is no input facility in the modem setup to activate the protocol. The importer of the device seems to have chosen to not respond to such tech issues.
It now comes down to either using the CGN3 as a Modem/WiFi server or extending the network to include the Airport Extreme on the CGN3 (don't know how to do that) or vice versa, extending the Airport network to include the CGN3 (don't know how either).
QUESTION:
Does anyone have any idea on how to make the Airport Extreme and HiTron Modem/Router function together since the Extreme has the ipv6 protocol enabled and NEST (and other 'Internet of Things') devices will reconnect, no problem.
More Info:
The only reason for the CGN3 to remain as a WiFi server is its range which seems to cover the required service area with a more powerful, stable signal than the Airport. That is somewhat important since TV services come over the Internet and mobile devices apps available from the Apple store can be used as very capable program guides/selectors and remotes for the HDPVR and secondary HD boxes that feed the TVs, eliminating a remotes collection and associated programming and infra-red transmission hassles. I believe the Cable boxes would accept getting the TV signals from the CGN3 and function commands from the Airport Extreme networks. That remains to be proven. Level 2 Technicians at Rogers and NEST Labs have looked at this and can't access the CGN3's ipv6 function to activate it. They don't know much about the Airport Express.
Second Thought:
On the other hand, a second apple Airport base station would extend the network range to rival the CGN3 and the WiFi function of the CGN3 could be turned off. I tried to connect the two routers by LAN cable but they don't seem to see each other and I don't know enough about network settings to get any further.

Whichever airport you use.. express or extreme doesn't matter much..
It should be setup in bridge mode. Plug an ethernet cable from LAN port on the CGN3 to WAN port on the Apple router.
Go into the airport utility and run through the setup. Don't be too worried if it chooses the wrong setup.. you can go back and edit it after the setup is complete.
You will want to open the Edit.
Then go to the various tabs to ensure it is setup the way you want..
On the Network tab.. bridge mode.
On the wireless tab, create a wireless network.
I recommend you use names that are short, no spaces and pure alphanumeric. eg AEwifi In my case with Time Capsule I use separate wireless names for the two bands. TC24ghz and TC5ghz but that is up to you.. it can make life easier.. then set channels can also make things easier.
Ensure your IPv6 is setup correctly.
The actual internet option will be dhcp.
You will have two wireless networks.. but both will use the CGN3 as router.. the airport if it worked in the past should work. Even if it is not the dhcp server. BUT let me add there is another way to fix this if this setup doesn't work.. please post back your result.. no luck then I will show you how to setup a static IP with the Apple router.

Please help me connect eMac, cable modem, and Airport Extreme Base Station

I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)

jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

Airport Extreme Base Station and DSL modem, IP address Conflict issues

I recently set up DSL service in my apartment. I have ATT yahoo DSL modem, and an Airport extreme base station plugged into it. The network works fine with my Vista PC connected to it, but when I try to connect my macbook to the network I get errors telling me the IP address the macbook wants to use is already in use, and my PC gives me an IP address conflict error.
The internet is fine, and the modem is configured automatically, so I think it must be a problem with the way the network is set up or the network settings on my macbook...
any ideas?

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

Comcast HSI, AirPort Extreme Base Station issues

Recently, I've been having some connection issues with my Comcast High-Speed Internet and my AirPort Extreme Base Station. I'll be connected fine one minute, and the next my AirPort monitor drops to 2 bars of signal and nothing will connect. Resetting the base station and the modem works about 50% of the time, while just sitting here "dealing with it" works the other half of the time.
I rent my cable modem from Comcast, and I believe it is the Terayon TJ715. I went to the Apple Store San Francisco and had my base station replaced, thinking it was the culprit, but alas, the problem is continuing, only less frequently.
I've replaced all my ethernet cables, tried it with my AirPort Express (which works more often, yet has the same problem occasionally), yet my connection uptime and signal still drops to 2 bars and essentially disconnects.
Even stranger, the computer I have connected to the LAN port seems to work fine even when the computers connecting wirelessly are having issues.
I'm going down to a Comcast Support Center on Friday to (hopefully) replace my modem with a newer model (someone told me that older Comcast modems "kill" AirPort Base Stations), but other than that, any ideas? Anyone have this type of issue with Comcast in the past?
The 3 machines im running are:
Dual-Core 2.3Ghz Power Mac G5 via AirPort
867MHz PowerBook G4 (Titanium) via AirPort
800MHz iMac G4 (Flat-Panel) via Ethernet
Thanks,
Alexis
Dual-Core 2.3GHz Power Mac G5 Mac OS X (10.4.3)

Don,
Thank you for the link. However, it did not seem to solve my issue.
It's not that I haven't been able to connect to the internet at all using wireless. I will be connected fine (all 3 computers connecting to the internet simultaniously) when suddenly, any machine connected via AirPort (specifically my Dual-Core Power Mac G5) will receive two bars of signal and will no longer connect to the internet. The only remedy I've found is to reset both the cable modem and AirPort Extreme Base Station, and this only works about 50% of the time.
I am going to have Comcast replace the modem (and in the meantime, get new Ethernet cables) tomorrow, so hopefully I won't be having this issue anymore, but I'm more curious what may be causing the issue. Have you heard anything about older Comcast modems causing latency issues with AirPort Extreme Base Stations?
Thanks again,
Alexis

Airport Extreme Base Station Internet Connection issue

Similar Messages

Maybe you are looking for