Airport Extreme Base Station Portscanning my System?
Bought the AEBS today and got it set-up in about five minutes; very nice. I then moved on to another (and completely different) problem, which involved opening system.log. What I discovered thousands of messages that read along the lines of:
"Aug 3 17:13:13 My-Computer kernel[0]: Stealth Mode connection attempt to UDP xx.xx.xx.3:51539 from xx.xx.xx.1:192"
where xx.xx.xx.3 is my G5 and xx.xx.xx.1 is the AEBS. I don't know which port number the AEBS started with (hopefully not 1), but it is clearly incrementing by one.
I was able to learn that 192 is used by the base station for PPP status or discovery, but could not find anything more. (If it is of help, I'm connected to the net via Verizon and a DSL modem. I set up the AEBS using the wizard, which defaulted to PPP over Ethernet.) My questions are:
- What exactly is it doing?
- Will it stop once it gets through the full range of port numbers?
- Can I make it stop? (I realize it's not really hurting anything, but it certainly seems like bad behavior to me.)
- Will it do this each time I boot my system?
Any other information is appreciated.
Thanks,
David
iMac G5 Mac OS X (10.4.7)
Will the airport extreme base station work with WD my cloud 3 tb drive?
Yes it should work with your AirPort Extreme base station.
Would I connect it to the airport extreme or could I connect it to my imac ethernet connection.
You'll want to connect it to one of the available LAN (opposing arrows) ports on the AirPort Extreme.
Similar Messages
-
Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff -
Solution to Airport Extreme Base Station + Airport Express networking probs
I've been investigating this for 3 straight days after inadvertently destabilizing my network. There are tons of posts discussing a variety of issues, all of which seem related. My goal here is to provide links to other relevant posts and explain what I ended up doing to get things to work.
First, the background. You can skip below to SOLUTION if you don't really care... However, I highly recommend you take the time to read everything, as you'll get other useful information in the BACKGROUND section. I'm guessing many of you have similar, related problems so BACKGROUND might help provide context (and solutions) to some things you are seeing...
MY SETUP:
AirPort Extreme Base Station (AEBS) of type b/g (round one, not square one), connects to the cable modem, and creates a WDS network that is then shared across two standard AirPort Express (AEX) units (100megabit, not the gigabit ones). One AEX serves as a relay unit that accepts clients, the other serves as a remote unit that also accepts clients. The intent is to show a single network throughout the house and let users log on to one network and move between networking units without having to switch from network to network.
I have a variety of networked devices throughout the house all running on the same network (2 Mac Pros, a Powerbook G4, a Mac Mini, an Apple TV, a Windows XP laptop, two iPhones, two wifi printers, and a 5-unit Sonos system, plus the AEBS and two AEXs). Yeah, I'm a geek.
The Mac Pros are both running 10.4.11, and the Powerbook is running 10.5.2.
AEBS is running firmware 5.7
AEXs are running firmware 6.3
All Macs were initially accessing configs via the recently released AirPort Utility 5.3.1. More on that later.
BACKGROUND:
I've had this network setup working for about a year now. Recently, I've been having poor network performance problems and came to the conclusion it was a LAN problem (ie. problem with my home network, as opposed to with my ISP). Upon initial investigation, I began by looking at my networking logs (via AirPort Utility 5.3.1). You get to those by selecting the unit in question, choosing "Manual Configuration", the selecting the "Advanced" tab up top with the "Logging and SNMP" sub-tab. Click the "Logs and Statistics" button therein for log details from that unit.
The first thing I noticed was "Administrative access denied to ff80::xxxxxxxxx" messages - a lot of them. I didn't recognize the ff80:: address in question, and so became concerned it was someone outside the network trying to hack one (or all) of the AEBS/AEX units. You can see threads discussing that investigation here:
"Hack or panic?" - http://discussions.apple.com/thread.jspa?threadID=1438486
"Administrative access denied" - http://discussions.apple.com/thread.jspa?threadID=1438865
Long and short of it is that the recent AirPort Utility 5.3.1 release (current as of March 13) seems to have problems (keychain) when attempting to access the AEBS and AEX units. The "Administrative access denied" logs actually refer to the client machine you are using when you try to read the logs. The ff80::xxxxxx address is simply the IPv6 address for the machine you are using; if you turn off IPv6 on your client machine, that address should switch over to begin showing a regular IP address instead (something like 10.0.1.xxx), which makes it easier to associate the IP to the machine. I explain how to deactivate IPv6 on both Tiger (10.4.x) and Leopard (1.5.x) here:
http://discussions.apple.com/thread.jspa?messageID=6814978#6814978
Anyway, in the process of investigating the "Administrative access denied" problem, I began tinkering with my AEX settings. Specifically, I ended up performing a hard factory reset (unplug unit, plug back in while holding down the little button with paper click/pen for ~10-15 seconds until light flashes green 4x then reverts to amber/yellow/orange). I began reconfiguring my entire WDS network using the newly updated AirPort Utility 5.3.1, and that's when the trouble started.
(If you are having problems seeing either your AirPort Extreme Base Station or AirPort Express, read this:)
In short, each time I thought I had properly configured things and then confirmed settings (kicking off a reboot on the AEX unit) the unit would restart with new settings but not properly join the WDS and not show up in the AirPort Utility list of units. More specifically, I would start with a "wiped" AEX and see both the AEBS and the AEX in my AirPort Utility list, but upon confirm/reboot the AEX would disappear and the AEBS would remain. However, that's not 100% correct. It seems that sometimes I would end up with the AEX and NOT the AEBS. Because both the AEX and AEBS were theoretically "hosting" the same network name (remember, WDS shares the network name across units) my auto-login feature for my client computer's wifi seemed to "jump on" whichever unit it first saw hosting the default network name for my house. In other words, it seems what was really happening was that I was ending up with two separate networks in my house, both with the same name but not talking to each other (as opposed to two units sharing the same network name and internet connection). The AEX would continue to blink orange/amber/yellow (whichever color it is to your eyes ) because it could not grab an internet connection -- and if I was on the network through that AEX unit I would not get internet. But if i was connected through the AEBS I would continue to have internet access. As far as my client computer (my Mac Pro) was concerned, I was on the home wifi network even if I was on the AEX rather than the AEBS -- it would show the home wifi network name as the name of the network it had connected to. But when I opened the AirPort Utility 5.3.1 I would see only the AEX (if I was connected through it) or the AEBS (if connected through it) -- a clear indication that the units were not truly sharing the same network.
I tried rebooting and reconfiguring the AEBS and AEX about 50 times (literally). I even tracked down an older version of the AirPort Utility 5.2.1 via this thread (see Tesserax post):
http://discussions.apple.com/thread.jspa?threadID=1067565
One interesting thing re: 5.2.1 is that the "Administrative access denied" errors summarized above disappeared. As explained in a post reference above, the going theory is that this a permissions/keychain problem new and unique to AirPort Utility 5.3.1. However, even though 5.2.1 does have a slightly different interface with different settings, I still couldn't get the WDS to work.
EVENTUALLY, I came across this post:
http://discussions.apple.com/thread.jspa?threadID=1422527
MuaddibOfArrakis walks through setting up a WDS from scratch, and the workflow is different than what is possible with either AirPort Utility 5.3.1 or 5.2.1. He's doing it with the old version of AirPort Admin Utility, which I fortunately saved a copy of many moons ago when I had somewhat-related problems with my WDS (since forgotten). In fact, it's a lot easier. What's nice about this older app is that it literally does the heavy lifting of "connecting" the AEBS and AEX units during the configuration -- it reboots both at the same time as the config is happening, and lets you choose from a list of available units to "add" to your WDS network. In short, it's a FAR SUPERIOR workflow even though some of the GUI isn't as intuitive as the newer AirPort Utilities that were designed to replace it.
SOLUTION:
If still have a copy of the AirPort Admin Utility follow the instructions from MuaddibOfArrakis here:
http://discussions.apple.com/thread.jspa?threadID=1422527
If not, try setting up your WDS network using AirPort Utility (hereafter AU), with these configs (take from my now-working network), as viewed through AirPort Utility 5.3.1.
I. Configure your AEBS.
Select the AEBS from AU, and choose "Manual Setup"
1. Under the AirPort tab up top:
a. Under "Base Station" sub-tab:
i.) assign a name for that specific unit, so you can later identify the specific unit from the list of units -- this is the name that will show up beside the unit in the AU list of configurable units. You can name it something like "kitchen", or "office". I have mine numbered, so XXXXXv1, XXXXXv2 etc where the XXXXX is the name of the shared network and the numbers help me tell the units apart. Just be sure you name each uniquely, and if you have several you might write the name on the unit itself.
ii.) pick a password for logging into that unit. This is different from the network password, its a security check to get in and change the configs on this unit later. Be sure to remember it in your keychain for the sake of simplicity, and write it down somewhere secure.
iii.) if you choose to set time automatically, pick a location that you will use consistently across all your units. I use time.apple.com.
iv.) uncheck "Allow configuration over Ethernet WAN port" unless you want to be able to remotely mess with settings -- which you almost certainly do not need to do.
v.) I left the "Options" button alone - no settings there.
b. Under the "Wireless" sub-tab:
i.) Wireless Mode: "Participate in a WDS network"
ii.) Network Name: this will be the name of your wifi network shared by all units, so be sure to remember what you pick. If you are already connected to this AEBS via wifi while you are making these changes, then you can use the same wifi name you already have set up -- you don't have to change it. Note that if you DO change it, after reboot your will LOSE connection to the network and have to reset your wifi settings on your client machine to match the new network/password in order to be able to access the network.
iii.) pick a Radio Mode. I'm using b/g compatible. You'll want to do the same, unless you are on the new gigabit AEX. I'm pretty sure about this, but not 100% -- others post if I'm wrong.
iv.) choose a Channel. This can be a more complicated procedure, but for now just pick something consistent across all your units. If you get everything working and find that you're having intermittent network problems, you could later try changing your Channel -- it can pick up interference from phones, microwaves, etc and changing it can help.
v.) I have wireless security set to WPA/WPA2 Personal.
vi.) Wireless Password is the password for access to your wifi network (not your unit itself). If you are connecting to your AEBS via wifi while doing this config, then you can use the same password you have already set up. Pick a good one unless you want other folks jumping on your wifi and stealing your bandwidth and/or credit card numbers . Remember it in your keychain and write it down someplace secure, because you'll need it for the other units too. As noted above, note that if you DO change it, after reboot your will LOSE connection to the network and have to reset your wifi settings on your client machine to match the new network/password in order to be able to access the network.
vii.) Click the "Wireless Options" button. I have my multicast rate set to 2mbps, transmit at 100%, timeout at 1 hour, and i have checked the "Create a closed network". This last step keeps your network from advertising itself to the outside world. Users can only find it by explicitly typing the network name into their wifi settings (e.g. AirPort -> Other... then enter Network Name, Security and Password). I leave interference robustness unchecked.
c. Under the "WDS" sub-tab:
i.) the AEBS should have it's WDS Mode set to "WDS main".
ii.) Check the "allow wireless clients" box on the AEBS; this lets you connect client machines to it directly too.
iii.) hit the plus button to add the Remote system (AEX). There are two types of configs for the AEX's - "remote" and "relay". Assuming you have 3 units like me (2 AEX and 1 AEBS) the key question is whether you will place each AEX within direct reach of the AEBS (remotes), or if you will have one AEX in the middle connecting to an AEBS on one side and an AEX on the other -- where the furthest AEX is out of reach from the AEBS (remote) and connects only to the AEX in the middle (relay). I'm using a relay setup. If you are using relay, you can still set up the AEX relay to serve client computers too -- it doesnt have to JUST relay. More on that later. For now, you want to add only AEX units that will talk DIRECTLY to the AEBS. So if you have a setup like mine, just add one (the one in the middle - the relay). If you have two remotes connecting directly to the AEBS, you will add them both here. When you hit the '+' button it will ask for both an ID and description. For description I use the name I'm assigning to each unique unit (as above, "kitchen" or XXXXXv1 or whatever you use). For AirPort ID, use the number listed on the AEX unit itself (not the number for "Ethernet", also on the AEX unit).
d. Under the "Access" sub-tab:
i.) I have it set to "Not Enabled". I'd suggest you start that way too, and you can go change it later if you get everything working correctly.
2. Under the "Internet" tab up top:
a. Under the "Internet Connection" sub-tab:
i.) Connect Using: Ethernet
ii.) Configure IPv4: Using DHCP
iii.) Ethernet WAN Port: Automatic (Default)
iv.) Connection Sharing: Share a public IP address
b. Under the "DHCP" sub-tab:
i.) DHCP Beginning Address: 10.0 . 1 . 2
ii.) DHCP Ending Address: 10.0.1.200
DHCP Lease: 4 hours
c. Under the "NAT" sub-tab:
i.) nothing should be checked;
ii.) nothing under Port Mappings either
3. Under the "Printers and Advanced" tabs up top:
Nothing special needs to be configured there.
THAT'S IT.
=============
I. Configure your AEX(s)
Select the AEX from AU, and choose "Manual Setup"
1. Under the "AirPort" tab up top:
a. Under "Base Station" sub-tab:
i.) pick a unique name for this unit, same logic as for AEBS
ii.) pick a password specific for accessing this unit, same logic as for AEBS
iii.) Set time automatically: be sure to use the same settings used on your AEBS
iv.) Options: no need to set any
b. Under "Wireless" sub-tab:
i.) Wireless Mode: Participate in a WDS network
ii.) Network Name: same name used for AEBS, this is the name of your wifi network
iii.) Channel: same as AEBS
iv.) All settings here (those above, plus Security and Password & in Options button) should be the same as for AEBS settings on this tab
c. Under the "WDS" sub-tab:
...if AEX is "in the middle" (as described above):
i.) WDS Mode: WDS relay
ii.) Allow wireless clients: check (unless you only want to bridge between the edges without letting folks connect on this AEX in the middle)
iii.) WDS Main: set to the AirPort ID (aka MAC address) for the AEBS. You can find it on the bottom of the AEBS, either labeled as such or at the bottom beside the logo of a wireless signal (square logo, with semi-circles mimicing a radio signal).
iv.) WDS Remotes: click the '+' to add any AEX's that will connect to this relay rather than directly to the AEBS. Same deal as above, use the name in the description and use the AirPort ID from the side of the AEX (not the Ethernet ID).
.....if AEX is connecting to a relay ("on the end", as above) or if there is no relay and AEX connects directly to the AEBS:
i.) WDS Model: WDS remote
ii.) Allow wireless clients: checked
iii.) WDS Main: if connected to a relay, use the AirPort ID of the relay AEX. If connected to the AEBS directly, use the AirPort ID of the AEBS
d. Under the "Access" sub-tab:
i.) MAC Address Access Control: Not Enabled (for now, you can change later)
2. Under the "Internet" tab up top:
a. Under the "Internet Connection" sub-tab:
i.) Connect Using: AirPort (WDS) -- should be selected and gray'ed out.
ii.) Configure IPv4: Using DHCP
iii.) Ethernet WAN Port: Automatic (Default)
iv.) Connection Sharing: Off (Bridge Mode)
3. Under the Music, Printers and Advanced tabs up top:
Nothing special needs to be configured there. You can worry about AirTunes settings later...
That should be it. I'd recommend setting up the AEBS first, then the relay (if applicable), then the remotes. Initially, you can bring each unit in the same room with you for configuring. After configured and restarted the AEX should blink then turn solid green. If it turns green you should be good to go.
HOPE THIS HELPS. As noted above, I did not config through AirPort Utility 5.3.1 so I haven't tested this procedure through that app. However, after getting my network to work I went back and transposed all settings into this post to help others. Please provide feedback on whether or not this is working, so we can collectively try to move towards a setup procedure that works for everyone....
Good luck!
Message was edited by: b.byrdI'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy. -
How do I connect my Synology NAS to my AirPort Extreme base station?
I'm considering replacing an Apple AirPort Extreme base station with my current 5 year old router. I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router. I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Thanks for all your help in advance as I am VERY new with networking devices.I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device. -
Hi. In November I set up my airport extreme base station (5th generation I believe) to wirelessly extend the wifi network we use at home to see if it would increase download speeds. Before doing that, I did a factory reset of my airport extreme, and the owner of the airport extreme to which the ethernet cable is attached made changes to his network to allow it to be extended. I folllowed all the directions from the apple support pages, and finally got it to work. I could even access a portable hard drive which I attached to the airport extreme base station being used as the extension. Then a week or so ago I noticed that my laptop would no longer connect to my base station. I did not have time to look into it until this week. Airport utility, either on my Mac or iphone no longer recognizes my base station. My mac is running OS X 10.10.1 and my iPhone is running iOS 8.1.2 I have tried both hard, soft and factory resets of my base station to no avail. The only thing that has changed after doing that, is that when I do a soft reset of my base station, a neighbors airport express appears when it never did before. I can't actually connect to it, but it does try. Then after approximately 5 minutes, it disappears from my list.
Today I went and pulled out my OLD AIRPORT EXTREME base station... you know, the one that looks like a space ship and is running wifi 802.1 b/c? airport utility DOES locate and display that, but airport utility returns a message stating that it cannot be set up by this software. I am attaching an image of that.
Thank you,
John
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?I think the initial problem is that your iPhone was connected to an open network that wasn't yours.
Go to Settings > WiFi and "Forget" the network created by that AirPort Extreme, it's older than dirt. Forget your neighbor's network also.
Perform the equivalent actions with your Mac: System Preferences > Network > Wi-Fi > Advanced... Delete every network that appears, including your own.
Then, connect to your own network on all your devices, after which you ought to be able to use any of them and configure your Extreme without any difficulty. You may need to start over with a "hard reset" on both the main AirPort Extreme and the one extending its network.
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?
Not exactly, but using iCloud Keychain will populate all your devices with the names of preferred networks that any of them connect to, no matter where they are. I don't know why Apple considers that a beneficial feature. -
2 airport extreme base stations later and still no internet connection-
Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will. -
Recognizing a printer attached to an Airport Extreme Base Station
I have attached a printer to the usb port of my airport extreme base station. The printer is recognized by two of my MacBook Pros running Mac OS X version 10.4.11. However, it is not recognized by my latest MacBook Pro running 10.5.2. Is this a problem with the new system, or is there another reason? I have, of course, made sure that the printer drivers are installed, and the printer attached to the Airport works with the new MacBook Pro when connected directly through a usb port on the laptop. Any help will be gratefully received!!
samandlily wrote:
I have something related to this topic going on. I have an Epson printer on my Airport Extreme via a USB. Just recently when I try to print from my iMac, I get a message saying that "the Airport Network is busy, and it will try again in 10-20 seconds". Then nothing happens and the document will not print. Any ideas what is going on?
Please do not pollute the OP's thread by posting here. You are clearly experiencing a different problem - different symptoms, different version of OS X, different printer - and will get much better help if you start your own thread because your problem will get lots more attention that way.
- cfr -
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format. -
Unable to access internet via my airport extreme base station
I have an AirPort Extreme Base Station which is hard wired to a Mac and which communicates wirelessly to a Mac in another room. My internet access is via comcast. Direct connection from this computer to my modem works fine, but not if I go through the AirPort. The LED lights of the AirPort indicate normal network activity, (flashing/on/flashing). I have tried disconnecting and reconnecting everything and rebooting the computer. The system has been working normally through the AirPort until today.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) Disconnect the AirPort base station from the Internet broadband modem.
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
(OPTIONAL) After the base station resets, go ahead and power it back down.
(OPTIONAL) Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
Networking with AirPort Extreme Base Station
I am connected to the Internet with an SBC dsl modem, which I have had for a couple of years with few problems. However, I have been having issues networking my Mac G5, 1.8 Mhz machine since I purchased it some time ago.
In the beginning (before the Mac or -- BM as I like to call it) I was using a D-Link DI-614+ router and running a desktop PC and a laptop PC wirelessly with success. Then I bought my Mac (which I dearly love) and introduced it into my wireless network. At first it seemed to work OK. Gradually and occassionally it would lock up while trying to access an Internet site. Often the problem was resolved by rebooting the DSL modem, the D-Link router and all the computers. This would give me up to several days with no problems, but then things would rapidly deteriorate and I would have connection problems again.
I thought that if I bought an Airport Extreme base station, that would solve the problems but again, at first things were fine, then rapidly went downhill. I have worked exensively with SBC dsl techs and we have determined that the problem is not with the SBC network or with their dsl modem.
As it stands now I only get a maximum of a couple of hours of time before the slowing down of the network begins. Some of the error messages I get seem to indicate that there is a problem with the distribution of IP addresses. TCP/IP is set to use DHCP, and I connect by setting PPPoE to my SBC connections settings. "Connect using PPPoE" is unchecked. Location is currently "Automatic" although I have used the connection assistant a number of times in an attempt to get the system up and running.
I have the same problems in interconnecting the Mac with the two PCs that are on my system. In fact this is even more erratic than connecting to the Internet.
I have spent many hours with my limited knowledge of these things trying to resolve these issues but have had no success. I have scoured .Mac and other Internet sources and cannot find any specific solution to this problem. I am at a real loss as to where to go next. I am hoping someone here can help or point me in a direction where I might find a solution.
Thanks,
Don
Power Mac G5 Mac OS X (10.4.7)Thank you very much for your response. Yes, the Mac is set to use PPPoE and the SBC information is stored there.
Just to clean things up, I removed the PPPoE configuration on the Mac and left it unchecked.
Here is other information about how the system is set up.
Note: + means item is checked, - means item is unchecked
Apple Base Station V5.7
WAN Ethernet Port: Automatic (Default)
+Enable SNMP Access
+Enable Remote Configuration
-Enable Default Host at
+Enable Remote Printer Access
-Enable NAT Port Mapping Protocol
Internet:
Connect Using: PPP over Ethernet (PPPoE)
+always stay connected
Network:
+Distribute IP addresses
Airport client computers:
+Share a single IP address (using DHCP and NAT)
((Use 10.0.1.1 addressing))
Power Mac G5 Mac OS X (10.4.7) -
Airport Extreme Base Station - Wireless AND Hardwired connections
I have an Airport Extreme Base Station. I am under the impression that I can connect a hardwire via ethernet to my iMac, as well as use my wireless connections on my iBook. I am connected to the internet via my local Comcast Cable system on a SurfBoard SB4100 modem. I have one Ethernet port on the back of the Base Station connected to a Farallon iPrint Adapter for my antiquated (yet far more reliable than ANY injet I've owned) laser toner printer. I have a McAlly 5-port ethernet hub. I have a variety of ethernet cables, some with 8 wire connections, some with 4 wire connections. (Currently a 4-wire cable connects from the base station to the iPrint adapter) My total system has been dismantled for some time and I have been sailing through with the wireless connection on my iBook. But now I have a need to have both computers attached to the internet. I would rather have the hardwire connection and the wireless at the same time - if possible. The iMac is still on system 9 (stop laughing!) and I cannot afford to upgrade to 10 at this time.
Can anyone help me?I am under the impression that I can connect a hardwire via ethernet to my iMac, as well as use my wireless connections on my iBook.
Yes that is possible.
Insert the Ethernet hub between the Farallon iPrint Adapter and AirPort Extreme base station (AEBS). -
Macbook w/Airport Extreme Base Station
I have a Macbook that I just bought 3 days ago. Like everyone else, I am having the same problem with wireless encryption.
However, when I turn off the WPA and just use WEP, I can connect but it seems to lag. What I mean is everytime I browse, it's almost like my computer needs to "reconnect" with the router. If I stay a a site for more than a couple of minutes the connection kind of goes to sleep. It shows I am connected but it just sits there, sits there, and then connects. When I am on WPA or wired I do not get this.
So, for my actual question, does the Airport Extreme Base Station have issues like this?
On Apple.com, people are giving it glowing reviews. On the net, the reviews are marginal at best.
Current Setup:
Macbook
Linksys WRT54GX4 w/SRX400
Thanks in advance!I have several Linksys routers and also an Airport Extreme Base Station. I like the Linksys better. The AEBS has arguably better output power than my Linksys, but in my 1600 square foot house, it doesn't matter.
I also have a Macbook c2duo running OSX 10.4.10, and it drops off the AEBS just as much as any other router.
The downside of the AEBS is that it doesn't have a native web based management system. You've got to use the management tool to deal with the AEBS using SNMP protocol. It'd be nice if you had to manage 100 AEBS, but is a nuisance for home use. I found the latest realase of Airport utility (v5.2) to be very buggy on Windows XP - it killed my PC's abaility to negotiate a DHCP lease until I downgraded back to version 5.1. I ultimately went back to using my WRT54GS. The Linksys has lower throughput, but that only matters for specsmanship. The other thing is that Linksys can do multiple PPTP VPN pass through, but VPN pass through doesn't work on the AEBS unless you use bridge mode and static IPs.
I spent the cash for the AEBS, but in retrospect I would have rather put it towards memory upgrades, etc.
Bill -
Airport Utility 5.4.2 was unable to find Airport Extreme base station.
I downloaded the new Airport Utility 5.4.2 to my 2009 24" iMac with Snow Leopard. Now it is unable to find my Airport Extreme base station or Airport Express. My iMac is connected to the network via the Airport Extreme base station but the Airport Utility cannot find it. All I get is this message "Airport Utility was unable to find any Apply wireless devices. Make sure the Apple wireless device you want to set up is plugged in and in range of your computer and then click rescan to try again". I clicked rescan numerous time with no luck. I even downloaded the Airport Utility 5.4.2 again with no luck. What is wrong??? Everything was working fine until I downloaded the Airport Utility 5.4.2.
Thanks for the info.
Following your same steps exactly, I am able to save the configuration file to the desktop, or navigate to another folder to save it at that location.
I was able to do this previously with 10.5.x and with current Snow Leopard. Notice that you list 10.4.x as your operating system. If you are still running this OS, it could be that 10.4.x does not allow this feature with 5.4.2?
Not sure if downloading another copy of 5.4.2 would be worth the pain, as I'm inclined to believe that it probably would not help solve your issue. If you decide to do this, please post back with your results. -
Airport Extreme Base Station and Multiple Computer Access to the Internet
I have my IMAC connected to the internet via the Airport Extreme Base Station. When I am able to connect, my son's MacBook cannot. If I preform network diagnostics and reset the base station so he can connect (which appears to be luck on my part), I can no longer connect. When I first set this up, I had it working with all computers in the house. I tried to expand the system to boost the signal in our house with the airport express units. I have since removed them and started over, but still cannot provide internet access to more than one computer.
HelpTry this first...
Modem/Router Power ReCycling
- Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL/Cable modem; Wait at least 30 minutes.
- Power-on the Internet Router; Wait at least 5 minutes.
- Power-on the computer(s) -
Can Airport Extreme Base Station 802.11g Connect To Park's Free WiFi?
The RV resort where I'm staying has free WiFi for Internet connections. It shows up on my iBook's Airport list of possible networks in the menu bar, along with my own local network which is an older Airport Extreme Base Station (white dome 802.11g) which has my HP printer plugged into it via an ethernet cable.
However, when I am connected to the park's WiFi via the laptop's Airport network choices, I am NOT connected to my AEBS, and therefore cannot print to the printer wirelesslessly. Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?
Sorry, but no. You cannot connect your iBook's AirPort to more than one wireless network at a time. Since it will be highly unlikely that you will be able to create a Wireless Distribution System (WDS) between your RV resort's Wi-Fi and the 802.11g AirPort Extreme Base Station (AEBS), you won't be able to extend it to meet your needs.
Maybe you are looking for
-
using the google highlight bar
-
I have a blue screen and no disks as computer is second hand
hi there. I bought a second hand mac book pro from ebay last year as I had never had an apple computer before and wanted to see how I would go. I have been downloading movies and the computer was working fine. Last night the computer seemed to over
-
Security and Privacy in settings refuses to unlock
Any solution to unlocking security and privacy in settings, it won't allow itself to unlock "Click the lock to make changes" stays locked Thanks
-
I found iPhone 5 So I want to return to owner How I can contact him This is imei number of phone <edited by host> So this this locked to Icloud also I cannot find any contact number of him At least if I get email address I can contact him How I get p
-
Over riding a properties file?
Is there a way to pass a new properties file on the command line that will over-ride a properties file embeded in the jar file? Our deployment would otherwise involve creating multiple copies of one jar file with slightly different properties files (