Airport extreme base station with Hp 3210 all in one printer

Just bought and hooked up the above. Using with iBook G4. Still dealing with dial-up unfortunately, but got online just fine. When I tried to print on the above, it immediately dialed up when I hit "print". ?? What's going on?

I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
No the problem is with the HP driver.
Try using the HPIJS drivers.
For those with the older base station.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?
No, not via the USB port.
Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Similar Messages

  • AirPort Extreme Base Station with Modem not recognized by airport utililty,

    My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
    How can I make it trusted again and get dial up internet to work again?

    resetting has worked for months with no return of the problem.

  • How can I set up the airport extreme base station with windows computer

    how can I set up the airport extreme base station with windows computer

    Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547  to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

  • I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

    I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
    office where I have a iMac 24" 2.4ghz with really fast internet
    I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
    new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
    which is in my family room and that is also where the Airport Express with iTunes was located
    now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
    internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
    +BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
    TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
    Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
    my Macbook Pro 17"
    Please help as I don't want to spend money on another 802.11n if it will not extend
    I
    Message was edited by: macman60

    So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
    Sorry but I'm not sure what this long run-on sentence is trying to say.
    You asked if the network could be wirelessly extended and that is what I replied to.

  • New AirPort Extreme Base Station with OS X 10.3.9?

    I have an iMac running 10.3.9 along with a XP box. Can I use the new AirPort Extreme Base Station with this setup. The sys reqs seem to say that I need OS X 10.4.8. I want to use this new wireless base station with AppleTV.
    I really don't want to upgrade to 10.4.x especially since Leopard (10.5) is supposed to be coming out soon. Of course this supposes I can even run Leopard on my non-intel iMac.

    I have an iMac running 10.3.9 along with a XP box.
    Can I use the new AirPort Extreme Base Station with
    this setup. The sys reqs seem to say that I need OS X
    10.4.8. I want to use this new wireless base station
    with AppleTV.
    In order to connect to the new Airport Extreme Base Station 10.3.9 will be fine.
    In order to use Apple TV then you will need to be running 10.4.8
    I really don't want to upgrade to 10.4.x especially
    since Leopard (10.5) is supposed to be coming out
    soon. Of course this supposes I can even run Leopard
    on my non-intel iMac.
    You will be able to run 10.5 on non-Intel Macs.

  • Setting up airport extreme base station with Mac and PC

    I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

    Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
    To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

  • Configure TC and Airport Extreme Base Stations with different channels

    I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap.  I thought I would post my results here since I didnt' find a good article online.
    Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup. 
    Setup is a 3 flloor house where the 3 wired network locations have wireless overlap.  The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel.  In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
    Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels.  I am writing this from memory, so feel free to ask questions and I will track this topic:
    Procedure
    Setup time capsule as your base station.  Do all the setup for your wireless and guest networks.  Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
    Plug your first airport extreme/access point into your wired network.  Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
    Use the airport utility to first configure it to "extend" your wired network. 
    Then, go in and reconfigure it manually in the airport utility.  Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
    Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137). 
    Now go to the top tab and click on the "internet" icon
    Go to the DHCP tab and change it to "bridge mode."  This will tell the AE to not give out IP addresses (the TC will do this for you).  If you get an error that the IP ranges conflict, you have not done this
    Note that if you have a guest network setup, you will need to set this up on the AE as well. 
    Now test your airport setup.  Take your client (macbook, iOS device) and connect to your network.  Move to a spot near the TC and pull up a web page.  Keep an eye on the signal strength and beginv moving toward the AE.  Refresh the page as you move around.  You should at some point see the signal strength increase.  Refresh your page again.  You should be now connected to to the AE.  I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
    Another test you can do is to start backing up on your TC and then test the move.  The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
    If you need to setup another AE, simply follow setups 3-10.
    I hope this helps others.  I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products. 

    I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap.  I thought I would post my results here since I didnt' find a good article online.
    Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup. 
    Setup is a 3 flloor house where the 3 wired network locations have wireless overlap.  The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel.  In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
    Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels.  I am writing this from memory, so feel free to ask questions and I will track this topic:
    Procedure
    Setup time capsule as your base station.  Do all the setup for your wireless and guest networks.  Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
    Plug your first airport extreme/access point into your wired network.  Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
    Use the airport utility to first configure it to "extend" your wired network. 
    Then, go in and reconfigure it manually in the airport utility.  Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
    Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137). 
    Now go to the top tab and click on the "internet" icon
    Go to the DHCP tab and change it to "bridge mode."  This will tell the AE to not give out IP addresses (the TC will do this for you).  If you get an error that the IP ranges conflict, you have not done this
    Note that if you have a guest network setup, you will need to set this up on the AE as well. 
    Now test your airport setup.  Take your client (macbook, iOS device) and connect to your network.  Move to a spot near the TC and pull up a web page.  Keep an eye on the signal strength and beginv moving toward the AE.  Refresh the page as you move around.  You should at some point see the signal strength increase.  Refresh your page again.  You should be now connected to to the AE.  I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
    Another test you can do is to start backing up on your TC and then test the move.  The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
    If you need to setup another AE, simply follow setups 3-10.
    I hope this helps others.  I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products. 

  • Printer and AirPort Extreme Base Station with Gigabit Ethernet

    Hello!
    I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

    Hi
    Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
    Hope that you will solve your problem soon.
    Berit

  • Airport Extreme Base Station with HP Printer problems

    I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
    Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
    Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?

    I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
    Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
    No the problem is with the HP driver.
    Try using the HPIJS drivers.
    For those with the older base station.
    Use the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://tech.ifelix.net/1300.html
    Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?
    No, not via the USB port.
    Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
    http://discussions.apple.com/thread.jspa?messageID=610763&#610763

  • Can I use the Airport Extreme Base Station with my already existing D-Link router to increase signal strength?

    I already own a wireless router that I would like to keep. Could I use this Airport Extreme Base Station to improve that signal strangth to my room from the living room or to the basement? Would I have to hard-wire both the Base Station and my existing router? You probably have read this question more than once, and I have read some questions of this product too, but for some reason these Apple products I have some trouble with.

    Could I use this Airport Extreme Base Station to improve that signal strangth to my room from the living room or to the basement?
    Yes
    Would I have to hard-wire both the Base Station and my existing router?
    Yes

  • What needs to be done to avoid WIFI drop-offs with Apple AirPort Extreme Base station with Extended Wifi

    Hi there,
    can anybody please advise me what needs to be done to avoid WIFI drop-offs every half an hour or 1 hours.
    I use voip phoe calls a lot using my WIFI, However my AirPort WIFI connection drops-off while I am in the middle of WIFI VOIP calls.  This is causing significant disturbance in my family.
    Please assist.
    In details, I have extended my WIFI range using 2 Apple Airport Extreme Base Station.
    Main Base is - A1408 9 (5th Gen),  and I have extended my WIFI in my L shape house by connecting another Apple AiPort A1354 ( 4th Gen) with AA1408.
    Note1:
    > when I am close to A1408 my iPhone4 connected with A1408 automatically
    > When I am close ot A1354 , my iPhone4 connected with A1354 automatically.
    Note2: these drop-offs never occurred when I had only 1 Apple AirPort Extreme Base station WIFI
    I think, this Auto switching causing the slight drop outs in my Wifi when I am on the VOIP call.
    Do you think that something is going wrong with my Apple AirPort Wifi extended?
    Much appreciated

    To help eliminate drop-offs you need to ensure that your extended network is operating at its peak bandwidth performance. Base station placement is critical in an extended network. Please check out the following AirPort User Tip for details.

  • Using Airport Extreme Base Station with Cable Modem

    Hi everyone,
    I have just bought an Airport Extreme Base Station. I connected it to my cable modem (Surfboard 3100) through the WAN port and my iMac G4 is connected to it through the Ethernet port. Installed the Airport Utility, and configured the base station with the normal settings of DHCP for Internet and DHCP for internal network.
    After restarting the base station, my Internet connection from the iMac through the base station is very slow and most of the time will time-out. My Internet connection through my PowerBook G4 using wireless through the base station is ok though.
    My question is, is there some setting which I should set for the Ethernet portion of the base station to make my wired connections to the Internet work?
    Thanks in advance for any help!
    regards,
    Weiming
    iMac G4   Mac OS X (10.4.10)  

    Hi,
    My iMac G4 does not have an Airport card. I did not physically restarted the base station, its part of the sequence when we update the configuration, that the base station will restart on its own.
    regards,
    Weiming

  • I BEG of you:  How do I replace an Airport Extreme base station with a 4th-generation Time Capsule as the base station?

    I'll be damned if I can figure this out.  I have a new late-2012 iMac (OS 10.8.3) connecting to my LAN via Airport wi-fi.  (It will be Ethernet-connected, as soon as a hole is drilled into my new work table, but right now the Ethernet cable doesn't reach.)  My wife uses a 2011 MacBook Air.
    The LAN consists of a flying-saucer-looking Airport Extreme connected by Ethernet to the modem, plus 2 old Airport Expresses.  I have an Ethernet switch too, through which I've got a TV connected and a printer connected. 
    I bought a 4th-generation Time Capsule about a year ago, but couldn't figure out for the life of me how to replace the Airport Extreme with it.  I became so incredibly frustrated that I hid it away in a closet until now.  I  just tried again, with the same results.  I've got both Airport Utility 5.6 (to use with the old Extreme and Expresses) and Airport Utility 6.2.  I was using version 6.2 to set up the Time Capsule... or to try to.  Once again, I cannot for the life of me figure out how to do it!  I tried so many different Ethernet wiring connections that I now cannot remember them well enough to describe them here.
    I distinctly remember that, when I tried this a year ago with my wife's MacBook Air and Airport Utility 6.2, I was presented at one point with the question whether I wanted to replace an existing base station with the Time Capsule I was trying to set up, but this time I never was presented with that option.
    Is there anyone who can, in essence, hold my hand and walk me through this process step-by-step?  At this point I even need to be instructed what to wire to what.  I feel like a total incompetent.
    My MOST sincere thanks in advance for help!
    (I hope Time Capsule is the correct forum for this question.  I considered the Airport forum as well, but I don't want to cross-post.)
    (And, just to complicate matters, after I get this done-- assuming I ever do-- I want to use the old Airport Extreme on the outside of the house to extend the range of my LAN to the back yard... but that's for another day entirely.)

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I own an Airport Extreme Base Station with a HDD connected. Can I copy my iTunes Library to this HDD and play it on my iPad?

    Now I use Home sharing. This works well, but I have to keep my computer running with iTunes open. I like to shut down my computer.

    Hans Brinker wrote:
    I like to shut down my computer.
    currently i know of only one way to achieve that. using FileBrowser on iPad, you can access media files stored on
    a NAS
    an external HD connected to an airport extreme
    a time capsule

  • Using Airport Extreme Base Station with a Switch

    Thanks in advance for your help, this has been driving me crazy.
    Here's the setup I'm trying to make work but without success:
    Cable modem -> AEBS -> Switch -> ethernet cables -> devices (TV / Roku / ethernet wall plates, etc.)
    Hardware:
    - Cable modem is ARRIS / Motorola SurfBoard SB6183 - pure modem I believe, no router capability
    - AEBS is latest version new in Sep 2014
    - switch is TP-Link 16 port gigabit desktop/rackmount switch model TL-SG1016D
    Wireless from the AEBS works, but I'm not able to get any signal from anything connected to the switch. I'm using the bottom ethernet port on the AEBS to connect to the modem.
    Is this 1) a configuration issue with AEBS, and since it's a router I can use it in between the modem and switch, just need to change settings on the Airport, or
    2) a setup issue, and I need to get a proper ethernet router and slot it into the setup somehow...
    3) some other issue
    Again, much appreciate your help,
    Dan

    The setup that you mention is correct.
    We assume that you have another Ethernet cable connecting from one of the LAN <--> ports on the AirPort Extreme to the switch.
    Temporarily, disconnect the Ethernet cable that is connected to the switch and instead, connect it to another device.....like a computer.....to see if you can get a good Internet connection that way. Be sure to turn off the wireless for this "test".
    If you cannot get a good connection this way, try another Ethernet cable.
    The whole idea here is to first confirm that the Ethernet LAN ports are working correctly on the AEBS.  Assuming that the you can get a connection during your "test", this confirms that the AirPort Extreme is working correctly, and you will need to add the switch back to the network and test to make sure that it is working.  Test each port with the computer.
    Please post back on your results.

Maybe you are looking for