AirPort Extreme bast station 4 support for PB G4 power pc??

I am in the market for a wireless network. I've read that Apple is hard at work on AEX4 with MIMO technology. I don't mind waiting, but wonder if I even should since I also read that Apple has been quietly integrating support for pre-n on new macbooks, which lead me to believe that a power pc with an Airport extreme wireless card won't support pre-n rates anyway. If true then I'd be well enough to invest in 802.11g. Any thoughts on this would be appreciated.
Jeff

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

Similar Messages

Can the AirPort Extreme Base Station be plug-in to the power forever?

Hi,
sorry for my english but this is my question: Can the AirPort Extreme Base Station be plug-in to the power (electricity) forever? I mean, I don't have to un-plug the Base Station sometimes? Thanks
Alvaro

Sounds more like an issue with your router and
network than a problem with AEBS.
Which router?
I certainly do not need to reboot my AEBS like that,
I think I have rebooted it once in two years!
I would start a new thread describing your network in
more detail and the issues with the AEBS.
Thank you, but my diagnosis is the result of many days
of experiment with about hundreds of users. It's a bug,
I know were it is. It was reported to Apple in september
(2005).
It isn't that easy to upgrade at the same time all the
wireless (802.11b and 802.11g) that do have to interoperate
smoothly within the same space.
I don't think anyone need to waste more time on these
bugged firmware versions (5.6 & 5.7) as I already explained
it. They work smoothly just in a limited environment
which they were conceived for: one Mac connected to one
AEBS connected to one FAI.
You can't recommand these version to colleagues who have
to live in a real world with other wireless equipment
(a Mac not updated, an ABS not updated,
a Cisco wireless card emitting to 100 mW and smashing all
the neibourhood, a pre 802.11g+ card using 2 channels at
the same time...).
dan

Airport Extreme Base Station as bridge for Westell DSL router

I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
Here is the situation (I rent so chances are we will not be moving hardware anywhere):
- Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
- One lonely Powermac G4 upstairs that does not have a wireless card
- One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
I don't understand why the AEBS seems unable to see the DSL network.

Hi,
Well, what I have been able to do is this:
I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
Anyway, I digress...
What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
Best regards,
Patrick
Macintosh G5, Powerbook G4 Mac OS X (10.4.7)

AirPort Extreme Base Station Failing to Power On

I have an AirPort Extreme Base Station that suddenly stopped showing a power light. I've had this device for less than a year. Is it likely that the power supply has gone bad this quickly? This is a model A 1408 unit. Any history of this?

I've had this device for less than a year. Is it likely that the power supply has gone bad this quickly? This is a model A 1408 unit. Any history of this?
Just take it back to apple.. yes the internal or external power supply can fail.. but if less than 12months old it is under warranty.. Apple wiil simply replace it.
It does happen .. not often but it is reported occasionally.
I have this problem too! I have a model A 1521 and I bought this mid august this year.It's depending between 2 or 5 days that my airport extreme stopped working and have no supply anymore.I need to pull out the plug and plug it back before it works again.
This is much more common.. return to apple for replacement.. try using it with a protected power board or even UPS and people say they work better.. the power supply shuts down with the slightest dip in power.. so it seems to be a design fault in certain batches.. there is a long thread..
My Airport Extreme intermittently shuts down completely.

Should I get a Airport Extreme Base Station?

My linksys is giving me problems. But with the compatibility problems I've been reading about with the AEBS, should I get it? I currently have a 2 macbooks, one with tiger, one with leopard, a windows xp pc, and 1 macbook pro running leopard. This christmas I'll be adding another Macbook and an iMac running leopard. Thanks.

Hello Pozzi. Welcome to the Apple Discussions!
But with the compatibility problems I've been reading about with the AEBS, should I get it?
I'm not quite sure which "compatibility problems" you are referring to. None of your Macs or the PC, running WinXP, should have any problems connecting with the 802.11n AirPort Extreme Base Station (AEBSn). For maximum security, using WPA2, just be sure that your PC's version of XP is at least at SP2 or greater and that it has WPA2-compliant wireless capability.

Lacie firewire / Airport Extreme Base Station

Hi
Is there a way to connect my Lacie Firewire External Hard Drive to the Airport Extreme Base Station ?
Waiting for your comments,
Sincerely
JR
JR
iBook G4 Mac OS X (10.4.3)

Thanks for your response Duanne
But actually I'm interested in not having mi hard drive connected to my iBook.
Since it's only me using the AEBS and moving around the house I taught I could get an a adapter for this issue.
I will keep looking for possible solution
thanks again
JR
iBook G4 Mac OS X (10.4.3)

RANT: Why is there no power button on the Airport Extreme Base Station?

I know there is no solution to this until Apple updates the next generation of Airport Extrem Base Stations; hopefully they'll add a POWER BUTTON to it.
I like to turn off my base station when I'm not at home and the only choice I have is to pull the plug out of the back. Why? Two reasons: cut down on my energy bill and SECURITY.
Not that it really uses much energy, but I'm doing the environmental thing here. And my network is password protected, but I just feel more comfortable having it turned off when I'm not there.
So, does anybody feel the same as me about this?
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

Really an airport
being tunred off for the time you dont use it isnt
going to save the environment that much I am sure
there are plenty of environmental accidents that ruin
your hundreds of hours of energy use over the years
in mere seconds.
I'm not just thinking of myself when I speak of the environment and energy use. If everyone that has an Airport Network at home turned it off when they were not at home, I think it would make a significant difference. People need to think nore of their impact on the world instead of viewing just their one little piece of it.
It's like the people who leave their desktop computers and monitors on all the time. Turn the friggin' things off if you're not there and if it's not performing any function. Those devices are just eating up energy.
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

About Apple AirPort Extreme Base Station?

I Need A Wireless Router & i'm looking for Apple AirPort Extreme Base Station cause I Need a Wireless Router cause I Have at Home a Sony DVD Wireless Blue-Ray Player & i'm trying to Connect to The Internet on The Device but it's not letting me cause it say's I Have No Wireless Router to Connect to or Something? but I Connected The Sony DVD Blue-Ray Player to My 15inch Coby L.E.D LEDTV1526 HDTV & it Play's Blue-Ray Movies Excellent it just I Cannot Connect to The Internet on there cause I Need a Wireless Router & I Wanted to know if Apple AirPort Extreme Base Station is The Right Wireless Router for Me? cause I Like Apple & I Would like to Get The Apple AirPort Extreme Base Station if it's ok with what I Need it for? I Never had a Wireless Router before, I Love Sony & I Love Apple they both have Great Products on My Sony DVD Wireless Blue-Ray Player I Can Stream Movies From The Internet & I Wanna do that let me know if Apple AirPort Extreme Base Station is ok for me Please?
in My Bed Room I Have My 15inch Coby L.E.D LEDTV1526 HDTV & I Have My Optimum Cable HDTV DVR Cable HDTV Ready Connected & My Sony DVD Blue-Ray Player Connected to My 15inch Coby L.E.D LEDTV1526 HDTV But I Need a Wireless Router & is Apple AirPort Extreme Base Station right for me? all I Need now is Apple TV Next then i'm really Loaded Up.
in My Home I Have Optimum Triple Play Package Deal, I Have Cable HDTV Silver Package with Optimum DVR & Optimum Online Boost Plus for Internet & I Have My Regular Optimum Phone Service all 3 from Cablevision in My Bed Room & I Have over 2000+ DVD Movies & Music CD's & on Apple iTunes I Have almost 1000 Music & Music Video's & Almost 1000 App's for My Apple iPhone 4 32GB & Future Apple iPod Touch 64GB & I Have 32 Movies on Apple iTunes & 4 TV Shows on Apple iTunes & I Have 70 Mac App Store Mac App's from The Mac App Store
& in My Bed Room I Have My 2009 Apple 24inch iMac Computer & My Canon PIXMA MP480 All-One Photo Printer & My Apple Mouse & Apple Keyboard & My G-Technology G-Drive 1TB Drive & My Canon Powershot A2100 IS Digital Camera & My Apple iPhone 4 32GB From Verizon Wireless Connected To My 2009 24inch Apple iMac Computer so I Have lots of things going on in my Room. so have a Very Merry Christmas & Happy Holiday's & Happy New Year
If Someone did not like the way I Made this Thread i'm Very Sorry I Did it in the wrong way, I'm Sorry & I Won't do it if it was the wrong way i did it? & i'm sorry I Made the Mistake & I Just thought i would get Help on the Apple AirPort Extreme Base Station I Needed help with & I'm Sorry what i did if You did not like it, I Have not been on here often & I Only come here if I Need help with something so maybe you could let this thread slide but if not? then it's ok & i'm still Sorry I Made it & I Did not mean to make it in a bad way if thats what you thought? so have a Very Merry Christmas & Happy New Year & Happy Holiday's from your Online Friend & Costumer Byron.
Peace.

Ok after Christmas was Over I Went to PC Richard & Son & was looking for an HDMI Cable & I Found it so then I Asked them about My Sony DVD Blu-Ray Player & told them about the situation that I can stream Movies from the Internet to The Sony DVD Blu-Ray Player & then I also talked to them about a Router so after that they had Showed me The BELKIN Share N300 Wireless N' Router & they said this is The Cheapest 1 & it was $29.99 plus tax, they said that I Can Connect that to My Sony DVD Blu-Ray Player to The BELKIN Share N300 Wireless N' Router & Connect The Belkin Share N300 Wireless N' Router to My Cable Optimum Online Modem then Connect The Wire from The Optimum Cable Modem to My Computer so now My Sony DVD Blu-Ray Player can Stream Movies from The Internet & also I Have everything Conected & working great & I also have Netflix on My Sony DVD Blu-Ray Player & I Can also watch Movies on Netflix on My 24inch iMac Computer to, everything is working fine so now 1 Very Last Question & i'll leave you alone
if I Were to Buy Apple TV Can I Get a Wireless Home Networking Connection on The BELKIN Share N300 Wireless N' Router? or is it only can Work on an Apple Airport Extreme Base Station?
I Hope you had a Happy New Year ok take care from Byron.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Define static IP for both LAN and W-LAN devices with an Airport Extreme Base Station

Hey guys,
I have a lot of different devices connected to my Airport Extreme Base Station (5th Gen) either wirelessly or via ethernet cable. Since I control some of them via VNC and currently have to find the corresponding IP-addresses through trial-and-error, I'd like to define static IP-addresses for the computers in question. My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor. Two of the devices I want to remote-access are wired to a D-Link DES-1005D switch, which in turn is connected to the 1st ethernet port of the Airport Base Station. The remaining 3 remote clients are connected over 802.11n. All computers run Windows.
My problem now is that even though I was able to define static IP-addresses employing the "DHCP only" router mode, this didn't seem to work for the two computers connected via ethernet. Not only did I lose any internet connectivity with those, I even lost the ability to remote-connect to them using the VNC-viewer.
The question now is: how do I specify static IP-addresses for my ethernet devices correctly?
I hope you can help me.

My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor.
If you read the information in the other post, my answer would be the same here.
The Router Mode of DHCP Only is rarely used, and would only really be appropriate if your ISP was providing you with a fixed bank of multiple fixed or static IP addresses to use. This does not appear to be the case in your post.
If this were the case, the first IP address would be used as a Static IP address for your connection, and other devices on your network would receive the other fixed IP addresses.
99%+ of the time, you would use the Router Mode setting of DHCP and NAT on a network when you want the AirPort to perform as the main router for the network.
But......your post also indicates that you have another router upstream on your network from the AirPort Extreme. You would not want to run two routers in series on a network. That explains the problems that you are having.
The AirPort Extreme needs to be configured in Bridge Mode. It cannot be the "main" router on your network when you already have another router on the network. That is a fundamental networking rule.

I have a Cisco wireless router. Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

Airport Extreme Base Station - Need to extend network for extra distance

The literature on this topic is sparse. I have an Airport Extreme base station. I will like to "extend the signal" so that it is stronger in part of house. I would like to buy a product that will do this. Questions:
I think this is called "bridging".
1. Can I do this with the Airport Express as a 2nd unit??
2. Does the Airport Extreme work with other WDS 2nd units like Netgear?
3. Is there a darned manual to tell you how to configure the settings on BOTH stations?
Thanks.

How new is your Extreme? I ask because if your Extreme supports 802.11n, the setup process will be greatly simplified.

I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
Elizabeth

Thanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual

AirPort Extreme bast station 4 support for PB G4 power pc??

Similar Messages

Maybe you are looking for