Airport Extreme Bridge Mode Connection Drop

Hi everyone,
Hoping that someone will be able to help me. I have a one year old son who is now getting his hands into everything so a few weeks ago I decided to look at my options for networking my home iMac and External HD's.
I am currently running a SKY (Netgear router) into an Airport Extreme set up in Bridge mode. I have turned off the SSID of the SKY Router and everything connects to the Airport. On the AIrport I have a USB hub attached which then has three external HDs attached to it. I know this is a lot, but I have not had any issues at all with data transfer with this set up.
The issues I am having is that on average, once or twice a day the iMac will drop connection to the Airport. There is no patern to this as the iMac will drop connection while I have been working on the machine and also at times when it has been woken from sleep mode. There is then no physical way to restore the connection unless I restart the iMac. Even turning on/off airport does not fix the issue. If I try this, the iMac then seems to not be able to find any wirless networks, even those that are in the area of my home.
I have turn off the the airport and ran the iMac simply connecting to the SKY router and have experienced zero problems, the issue only happens when I introduce the Airport Extreme.
Does anyone know what might be causing the problem? I really need to try to get this to work so that I can eliminate the need to have the external hard drives attached physically to the iMac. In my home the router/Airport and drives are safely out of the way in a child proof area. I fear that if I have to introduce them back to being physically connected to the iMac they will no longer be safe from small hands!!!
Many thanks for any advice.
-  Neil

Unfortunately, you did not not include information about the operating system that you will use to configure the AirPort Extreme, so we would need that you be able to provide you with the correct steps to set up the AirPort Extreme.
Bridge Mode would be the correct setting for the AirPort Extreme, but you will not have to worry about this if you use the setup "wizard" in AirPort Utility on your Mac or an iPhone / iPad since the wizard will automatically provide the correct settings for the AirPort Extreme.
I'm not clear though on whether you want the AirPort Extreme to provide another separate wireless network or extend the existing Arris network. If you plan to locate the AirPort Extreme a room or two away from the Arris, then it might make sense to extend the Arris network, so you will have one "big" network that provides greater range.
Whether or not the Arris will have NAT issues, we cannot say. This will be one of those times where you will not know whether something will work correctly until you try.
If you are not in a rush to get the AirPort Extreme configured, temporarily power off the Extreme and get things working with the Arris modem/router and your Xbox.

Similar Messages

  • Airport in Bridge mode "not a supported format." Are you F'n kidding me?

    Forgive me if I'm freakin' a bit but I am at my wits end with Apple. Here's the breakdown.
    Fiber DSL into a standard wired 4 port D-Link router. Router is connected to HP 24 port switch because the D-Link does not have enough ports for my house. Switch feeds cat5 to all rooms in the house. Airport Extreme (newest version) is in living room and set to Bridge mode. I use it to connect multiple items in my entertainment area and wireless access for the Macbooks and iPhones.
    Up to a few weeks ago I was connecting my iMac via wireless but got sick of the connection dropping (pings would be unresponsive for minutes on end). I ended up moving my desk and plugging into a cat5 port on the wall. Well guess what... it's still dropping. OK, I removed everything from the network and started adding things one at a time over the past few days. Everything was running better than ever until I plugged the Airport back into the network. Mind you, I'm not running my iMac into the Airport, it is simply on the same network.
    After shaking my head for a while I called Apple. Well I just got off the phone w/ Tier 3 tech support for the Airport Extremes. I tell them that I have no idea why, but I'm only dropping connections when the Airport is on the network and I'm just curious if there is something in the settings that I'm missing. This is where it gets good... The brilliant Tier 3 "Technician" tells me that I am running an unsupported configuration because the Airport is running in bridge mode and it's attached to a wired router across the house. He says that if the D-Link router was also wireless he could help me. I asked what the difference was if it was wired or wireless but all he could say was he couldn't help me because it was a unsupported configuration.
    So - I'm ready to send all my CrApple gear to some poor kids on the other side of the world. Anyone have any ideas here?

    Bob Timmons wrote:
    I'm reading the original post with the understanding that the AirPort Extreme is connected by ethernet to the network and the replies indicate that as well.
    Are you saying that if the Extreme is in bridge mode connected by ethernet that the ports are not active?
    Not at all. What I was trying to say was that the connection from the Extreme to the internet must go through the WAN port, not a LAN port. In a large network, this can happen unintentionally. For instance, suppose a client has Internet sharing enabled and is connected wirelessly to the Extreme and by Ethernet to another router. Then the internet connection from the other router would be shared with the entire subnet, including the Extreme through its LAN port. This could cause problems with the network.
    However, with the network setup Jerastan describes, this does not seem to be the cause.

  • Port forwarding for Mac that shares internet to Airport in bridge mode?

    I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
    I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
    Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
    thanks for ANY help, I'm a bit lost here

    I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
    I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
    Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
    thanks for ANY help, I'm a bit lost here

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • My airport extreme will not connect to the Internet

    My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

    I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme.  The really funny thing is that I can set up a network between the two and it works fine.  I am using it at work now with out any problems so I guess there is really no loss :-?

  • Airport extreme unable to connect to new router

    We just received a new router from our cable company. The old router worked with our airport extreme just fine.  After hooking up the new router the airport extreme could not connect to it.  I received the following error "error occurred while trying to access the apple wireless device.  Make sure your connection is valid Error -6753" So then I tried to power off and reset the Airport extreme.  The button was stuck on my reset button.  I did figure that out and was able to click the button.  But even if I would hear the audible click when i held down the reset button the amber light never flashed rapidly?  Not sure what else to do.  I have turned off the modem, unplugged the router, plugged them back in. etc.   I just don't know where to go from here.
    Thanks!
    jodi

    Were you able to get the AirPort Extreme to reset back to factory default settings, as LaPastenague detailed?
    The amber light needs to flash rapidly for about 6-8 seconds during the process to indicate that the reset is taking place correctly. Once you release the reset button, the light will stay solid amber for 15-20 seconds or so, then change to slow blinking amber.
    We are a bit confused as well, since in your first post you mention that you received a new router from the cable company, then later in the post, you mention that you have a (separate?) modem.
    In the most recent post, you mention that you have a new modem. Is the new router from the cable company the same device as the new modem?  Or, do you have a new modem and another new router in addition to the AirPort Extreme?
    Can you clarify on exactly what devices that you have? Make and model numbers would help. We know that you have an AirPort A1408.

  • Airport Extreme won't connect with my cable modem (Time Warner)

    OK, I'm tired of staring at a blinking amber light. I'm reaching out to anyone out there who's had this problem. I've got everything connected right, the software loaded, the connections set on my laptop (Macbok Pro). But still my Airport Extreme won't connect to the Internet. I've tried different cables, rebooting both my modem and my Airport. For the record, I've had a Mac IT guy from my advertising agency come by my house and make sure that everything's installed and hooked up right. But it still keeps saying that my IP address is invalid, even though I can connect (wired) using the modem.
    I suspect I'll just have to take it to the Genius Bar or something. But anybody got any ideas? I really want to join the 'n' generation....
    -neil

    atotheb, Welcome to the discussion area!
    Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

  • Using AirPort Extreme hub to connect to stereo

    Is it possible to use a second Airport Extreme hub to connect to stereo speakers?
    If it is, what kind of cable might one use to do this?
    Thanks
    Charles
    iBook G4   Mac OS X (10.4)  

    No, the AirPort Extreme base station (AEBS) does not have any type of audio output.
    Are you thinking of the AirPort Express which does have an audio output?

  • Wired connection to cable modem.  Airport extreme has to connect to internet if computer goes to screen saver.  Any way around this?

    Airport extreme has to connect to internet if computer goes to screen saver.  Any way around this?

    Describe the issue in more detail.. as it doesn't currently make sense.. the AE should always be connected to the internet. It should never disconnect.. but the computer can fail to connect to wireless after sleep.. that is common problem.
    See Tesserax docos if you have wireless connect issues after sleep.
    https://discussions.apple.com/docs/DOC-3411

  • My airport extreme only will connect with computer or ipad not both

    my airport extreme only will connect with computer or ipad not both

    We need just a bit more information, please before we can begin to accurately troubleshoot this issue.
    1) What is the make and model number of your modem?
    2) What operating system are you using on the MacBook Pro at this time. Your tagline indicates that you are using OS X (10.4.8), but this is about 6-7 years out of date.
    If you are no sure which operating system your Mac is using......click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

  • Internet connection is through airport extreme is not connected

    internet connection through airport extreme is not connected maybe there is a problem setting it up

    Is it possible that using a Netgear Router connected
    to the AE (which is also a router if I understand
    correctly) could cause connection problems ?
    Yes.
    Ensure that that the AEBS is configured to not distribute IP addresses.
    Also ensure that the AEBS is on a different channel to the DG834G.
    iFelix

  • Make AirPort Extreme share internet connection with Time Capsule

    Hello,
    This is the situation: in one room there's an old Mac, the modem which delivers the internet and the AirPort Extreme which is connected to the modem.
    In another room there's the Mac Pro, the Time Capsule which is connected to the Mac Pro with an ethernet cable and to a printer via USB.
    I want the AirPort Extreme to wirelessly share it's internet connection with the Time Capsule so that the Time Capsule can share the printer with all three Macs (old Mac, Mac Pro and Macbook Pro), the Mac Pro can use the Time Capsule for Time Machine functionality and maybe the Macbook Pro too.
    And just using the Time Capsule for internet.
    How can I do this?
    At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
    Thanks!

    Is that AirPort Extreme "flat" or dome-shaped?  If it's flat (802.11n-capable), you should be able to configure the "main" router to "Allow this network to be extended" and the other to "Join a wireless network".  If the Extreme is dome-shaped, then you need a more-complicated "WDS" arrangement.  In either case it shouldn't matter much which router plays which role.
    I'm not sure what you mean by "And just using the Time Capsule for internet."
    Nathan-NL wrote:
    At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
    Is the printer connected to the USB port of the Time Capsule?  Can you see the printer in the "Printer" panel of AirPort Utility?  What happens when you try to use it from one of the Macs?

  • HT201974 how do you change your airport to bridge mode

    how do you change your airport to bridge mode?

    See your other post. Please, do not double post on the support forums, as it makes things very confusing.

  • "No Internet Connection" via AirPort Extreme bridged to Time Capsule

    Hello,
    We have a fairly large and odd home network consisting of a Comcast cable modem connected to a Netgear router, a Time Capsule wired to that one floor down (serving up WiFi and DHCP), and a new AirPort Extreme wired one floor below that, extending the WiFi network of the Time Capsule and set to bridge mode.
    On one MacBook Pro (and possibly others, haven't had them available to test yet), trying to connect to WiFi while downstairs (i.e. to the AirPort Extreme) yields a strong wireless connection, but "no Internet connection"; checking via network diagnostics or the Network panel reveals that the MacBook Pro has no IP address. This seems odd, as it happens even if the connection is first made on the 2nd floor to the Time Capsule, where a valid IP is retrieved, and then carried downstairs; even though the same IP address should be valid, the laptop's WiFi menubar icon starts cycling again and eventually shows the "!" and reports no Internet connection.  Checking the Network panel reveals no IP address via DHCP.  However, if I let it sit for a minute or two, the IP address comes back (the same one!) and all is well, at least for a while.
    I've tried switching to a manually-assigned static IP as a workaround, and that works perfectly well, but I'd like to get DHCP working properly if I can, for convenience's sake. Is there any reason why I should be having trouble with getting DHCP from the Time Capsule via the AirPort Extreme?

    Actually, yeah, my predecessor explained that he was running DHCP on the Time Capsule instead of the Netgear because he hadn't needed DHCP prior to the adding of a WiFi point (all other nodes were on Ethernet), so it had always been turned off on the Netgear. But your suggestion makes a lot more sense, of course, so I've put the Time Capsule into bridge mode as well and started the DHCP server on the Netgear. Seems to be working with my iPhone, though that was always working okay. I won't have access to the laptop to test it until later this afternoon, but I have high hopes. 
    Thank you!

  • HT4260 Airport in Bridge Mode - can you use its ethernet to connect other devices?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport? I prefer using a wired connection for Roku as wireless is very wonky most of the time. Will that work?

    If I buy a 2nd Airport Extreme to set up in bridge mode via ethernet, can I then connect other devices, such as a Roku or Apple TV via ethernet to that 2nd Airport?
    Yes

Maybe you are looking for