Airport Extreme can't connect to MacBook Pro running Windows XP

I have a new Airport Extreme Base Station and an intel MacBook pro that is 6 months old and dual boot. The AEBS is set up with WPA2 and AEs. All works well for both MacOS (Leopard) and WindowsXP in wired mode and wireless works fine for the Mac side. When i run Windows, i can see the wireless network but i can't seem to configure it to actually connect to the network. I set it to WPA-PSK/AES, but it never can connect, and when i go back to check the settings in zeroconfig (the Windows connection manager) the connection is always reset to "WEP". Any suggestions? BTWQ, we can't connect my son's laptop (Windows XP ) either.

Try changing the encryption, also make sure the computer is fully updated. Windows Xp computers do not all have native WPA2 capability. Try disabling security and see if that works. If it does not, it may be an interfernce problem on one computer. Try changing the wireless channel to 3 or 9

Similar Messages

  • How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

    I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

    I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

  • Can't connect to Macbook Pro running ML shares from Windows 7 Pro computers

    On my Macbook Pro I can see all the network shares on the windows machines and connect to them. On my Windows 7 Pro computers I can see the Mac but when I try to connect to it asks for a username and pawword. No username/password combo works. On the windows machines I can ping the Macbook's ip but when I try pinging the Macbook's name it returns 127.0.0.1. None of the windows machines have entires in the hosts file other than the ones commented out which is the factory default.
    When I ping machinename.local on the mac it returns the correct ip address so I'm pretty sure the Mac is working fine. I also went into the wins setting and put in the machinename and correct workgroup on the mac. The issue seems to be on the windows machines thinking the mac's dns name is localhost. Resetting the u-verse router didn't work. Turning file sharing off and on on the mac didn't solve the problem either.
    I was at one point able to connect to the mac shares from my windows machines but it just stopped working several days ago for no apparent reason.

    Try changing the encryption, also make sure the computer is fully updated. Windows Xp computers do not all have native WPA2 capability. Try disabling security and see if that works. If it does not, it may be an interfernce problem on one computer. Try changing the wireless channel to 3 or 9

  • Windows laptops can't connect to Macbook Pro shared internet when WEP security is on

    As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on.  My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required.  When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password.  The same thing occurs on my Asus Netbook running Windows XP.  Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products.  I want my MacBook Pro to save me from needing an external router.

    I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
    Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
    I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
    If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
    These links may be useful:
    AirPort- Joining an encrypted WEP or WPA Wi-Fi network
    AirPort Express- Difficulty joining 3rd-party network that is using WEP

  • HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

  • I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

    I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

    Don't use the CD software its not necessary.
    Infact put it in the trash.
    Your router will have an IP address in the range 192.168.1.1
    Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
    Also connect your router to your telephone line.
    Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
    Enter the default password and username (They are on a label on the router )
    Your now have the ability to set up your router.
    Your will need the password and user name supplied to you by your ISP at a minimum.
    Enter these and most modern routers automatically configure the basic networking setting.
    You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
    You should be online.
    Now remove the cable and connect to the Wifi and enter that passphase.

  • How can I get my macbook pro running Lion to print on my HP photosmart 309a??

    how can I get my macbook pro running Lion to print on my HP photosmart 309a??

    Did you install the drivers? Or have Software Update install them? This printer is supported:
    http://support.apple.com/kb/HT3669

  • Can a macbook pro run windows operating system?

    can a macbook pro run windows operating system like xp, vista or windows 7?

    nathalie1985 wrote:
    Is it best to run Windows 7 in Boot Camp, or would it be better to use VMWare Fusion or similar? I have a MacBook Pro Intel Core 2 Duo (OSX 10.6.8) and I also have a Dell laptop solely because one program that I need to use for work is only available for Windows. I would love to consolidate to my mac but am afraid installing Windows will ruin it!
    It all depends on what your useage of Windows will be, for playing games install it in BootCamp, for word processing, spreadsheets, email. browsing etc a virtual Machne will be fine.

  • Macbook Pro running Windows with Boot Camp, wanting to use iMac as second monitor.

    I am using a Macbook Pro that is running Windows with Boot Camp. I want to connect it to my iMac so that I can use the iMac as a second monitor. 
    If it is not possible, I also have a TV that I could use using an HDMI, however when I tried this my Macbook Pro running Windows 8.1 did not detect it in the Display Settings.
    What are my options? I just want to use my iMac or TV as a second monitor!!
    Any help is appreciated, tMachanks!

    See if your equipment qualifies:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/PH14264
    Ciao.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • Can´t connect my macbook pro to apple tv

    I can´t get my MacBook pro to connect apple tv.How to do?

    Hey Jonas!
    Depending on how you want to connect your computer to your Apple TV, I have a couple of articles for you that can help answer your question. First, if you have OS X Mountain Lion on your MacBook Pro, this article about AirPlay Mirroring will help you understand some of the options available to you with that feature, and at the bottom of the page is a link to instructions for setting up AirPlay Mirroring:
    About AirPlay Mirroring in OS X Mountain Lion
    http://support.apple.com/kb/ht5404
    You can also have your iTunes Library connect to your Apple TV through a feature called Home Sharing, more information on which can be found here:
    Understanding Home Sharing
    http://support.apple.com/kb/ht3819
    Hope that helps you understand some of the options available to you for connecting your MacBook Pro to the Apple TV. Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How can I connect My MacBook Pro to Apple TV?

    I am trying to connect my MacBook Pro to Apple TV but without success. Any ideas?

    How old is your MBP (year and season)?
     > About This Mac > More Info...
    Apple TV is supported on a early 2011 or newer MacBook Pros with OS X Lion v10.7.5 or later.  If your MBP is older than that then you can use AirParot to connect to Apple TV.

  • How can i connect my MacBook pro to my 24" cinema display and my led tv?

    I sãs wondering if there is a way of connect my MacBook pro to my 24" cinema display trough mini displayport and my led tv trough the hdmi input. I know that is a lot of addapters but i never saw something that allows me to do it.
    Thanks for any help

    You can get a Matrox DualHead2Go:
    http://www.matrox.com/graphics/en/products/gxm/dh2go/
    There is also one for 3 monitors if you fancy that too...
    and http://www.monoprice.com sells all kinds of cable adapters for your displays

  • Can i connect my macbook pro to a tv to watch movies etc

    I'm trying to connect my MacBook Pro to my TV to watch DVDs and catch-up tv shows.
    My MacBook is a late 2011 model, my TV is an LG, around 6 years old - doesn't have HDMI access, but has video & audio inputs.  I've successfully used these inputs to watch DVDs from my old Sony Playstation, so I know they work.
    I have the cables - a mini display port Thunderbolt to VGA adapter and a VGA to TV converter box, as well as the audio cables.  Connecting all these isn't my problem.
    When I connect it, and then go to Display, the problems begin.
    Once I plug the cable into the Thunderbolt port, the "Arrangement" option on the Display menu shows up, I click on it, then I check the "Mirror Displays" box- the screen on the MacBook changes, but nothing shows up on the TV.  I've tried all the input modes on the TV, nothing makes a difference.
    Underneath the "Mirror Displays" box is one that says, "Airplay Mirroring" and the drop down menu on this is greyed out, showing "no devices detected - I assume this is for Apple TV, and has nothing to do with what I'm doing.
    I've watched a few YouTube videos on how to do this - some show the same screen I get when I check "Mirror Displays" but in the videos, everything runs smoothly from there!
    One of the videos I watched showed instead a TV icon in the menu bar along the top right of the MacBook screen - this doesn't appear on mine - in fact, when I turn Mirroring on, all the items in this menu bar disappear.
    Can anybody help me please?  I'm very frustrated by this time!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • How can I connect my macbook pro to printers on my windows wireless network, How can I connect my macbook pro to printers on my windows wireless network

    My Macbook Pro running lion 10.7.2 is connected to my wifi network, which also has a PC, an hp photosmart and an hp laserjet connected to a server.
    I have been able to set up printing from my mac to the photosmart by entering the ip address, although it can be tempremental.
    The problem is that I cannot even find the HP Laserjet on the network at all and cannot link up to it to print.
    Any ideas??

    Look in the printer manual for instructions.

Maybe you are looking for

  • What serves as a 'pause' character between a phone number and an extension?

    In contacts - I need to be able to enter a phone number followed by a 'pause' followed by an extension/password.  Can someone tell me what character to use for the 'pause'? The number would look like this:  xxx-xxx-xxxx (pause) yyyy. I can't find thi

  • Please Help Me With My Yahoo App Problem

    Please Help Me With My Yahoo App Problem, Everytime I Want To Log In To Yahoo With Yahoo Application This Messege Appears, Please Help Me With this

  • Links no longer open when viewing images in search results, why?

    When viewing the results from an image search, you used to be able to click and open a link, at the bottom left of the viewed image, which took you to the origin page of the image you are viewing. When clicking those links now, it simply opens up the

  • Datafile Offline dropped.

    I have added a datafile to a tablespace and did the offline drop immediately since it was not adhering to the naming convention. Is their a way I can get rid off that file since the controlfile still has that entry. I can't drop and recreate the tabl

  • How to reset CS3 after W7 restore point Actv 24:24

    Cannot activate my CS3 after having to use a recent Restore point, now get the Activate 24:  24 code My ver. is a PS7-upgrade to CS3.   DO I have to do a uninstall - reinstall ?