Airport Extreme, Cant connect to shared disk

Hello,
Hooked everything up and both my ibook and MBP can access the net wirelessly fine. Installed the airport utility on my ibook to setup the airport, not on my MBP. i just attached an external flash disk and my ibook see it just fine and can copy files to the flashdisk connected to the airport but went to turn on my mbp and cant see the drive. how do i get my mbp to access the shared drive? do i have to install the software on both computers?
also, my disk shows up as "no name". is there anyway to change the name other than no name?
thanks!

AtomicChicken, Welcome to the discussion area!
Checkout KB 305040, AirPort Extreme (802.11n): USB storage volume does not appear in Airport Disk Utility or appears with an unexpected name.

Similar Messages

Airport Extreme loses connection to USB disk

Recently I upgraded my Airport extreme to 7.4.2 software. Since that time AE I keep losing connection to the disk when copying large files or after browsing on it for a while.
The drive is simply gone (no share advertised)
The only way to get it accessible again is by resetting the AE (soft reset via airport utility)
Is there a way to revert to the previous software (there appears to be no newer SW or fix at the moment)?
My config is as follows:
Airport Extreme 802.1n operating a 5GHz wireless N network, 1TB Seagate (Seagate FreeAgent 102D) external USB drive attached to it (formatted with MAC filesystem)
on the ethernet port is a linksys router acting as a Wireless G Accesspoint (for my wife's Windows laptop)

Toryn Farr wrote:
I've been having exactly the same problem. The Macs on my LAN will all continue to have Internet access. On any of them, the base station still shows up in a Finder window under "shared"... but if I click on it, it will think for a moment and then say "Connection Failed" where it normally says "Connected As: USER NAME". And then none of my computers can access the shared volumes until I reboot the router.
I'm having exactly this same problem.
Not sure where the problem comes from, but here is my environment:
Airport Express (older model) Version 6.3 as WDS remote
Airport Extreme (version 7.4.2) as WDS base station
Powerbook G4 (1.33 Ghz)
PowerMac G4 (Mirror Drive Door)
iTunes 9.0
I've had problems with my Hard Disk access from the Airport Extreme. I have Time Machine running automatically from two different machines to the same plugged in HD on the Airport Extreme. I get messages indicating that the backup can't be mounted. Once that occurs, I have to reboot the Airport.
Just like Toryn says, once you get Connection Failed, you must reboot the router.

AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
What am I missing here?

Hi Pete Mackie-
Nope. You aren't missing anything.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
Luck-
-DaddyPaycheck

Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

Diane,
I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
*+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

Airport Extreme wont connect too my router

Airport extreme dosent connect to my router via my ethernet cable, i just get a orange flashing light. Do i need to configure my router?

The ulitity program need to be updated after downloading its all sweet now. I just have too FAT 32 my External HDD and it will be fully operational

Sent wake-on-lan command will reset airport extreme internet connection?

hi,
I have a problem with my airport extreme.
1, My airport extreme is set always stay connected to internet. If I reboot my airport extreme, it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
2, if I sent a wol command to my NAS, airport extreme internet connection will be reset. it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
zhi

Derek-
Since I could not find an answer on the support site. I contacted Apple Support. Once I explained the symptoms the tech seemed to know exactly how to address my issue. I will explain what happened in hopes that it will assist you. It seems that the issue has to do with the type of wireless network security set up in the Airport Extreme that conflicted with the Vista notebook's wireless adapter.
The tech had me launch Airport Utility, log into the Airport and Click on the Wireless. First he had me change the Radio Channel Selection from Automatic to Manual and changed the 2.4 GHz channel to 9 (from default 11) and the 5 Ghz channel to 157. The wireless security was set to WPA/WPA2 and he had me change it to WEP (Transitional Security Network) and I entered a 13 character key.
This resolved the internet connection issue with the Vista laptop immediately, but now I cannot print to my wireless Lexmark printer. I have a support email to Lexmark. It seems that the Lexmark driver/software only lists WPA in the install dialog and does not include WEP. My guess is that this is the source of the problem.
I hope this helps.
-Eye

Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected?

Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected? I'm told that it's better to only use the WiFi capabilities of the Extreme and leave the Bigpond to feed to the extreme.

No, bridge mode would not be the correct setting for this.
Instead, look for a "wireless settings" tab or page that will provide the option to turn off or disable the wireless radio of the BigPond router.
If you are still having difficulty, it would be a good idea to post your question on a BigPond support forum or contact your Internet Service Provider.
Contact Technical Support - BigPond

Devices not connecting through Airport extreme wired connection

Hi
I just got an Airport extreme to use as an extention of my existing network, and to plug some devices in so that they can connect to the internet for updates (Sony Blu-ray player, dish network receiver, slingbox)...
my wireless is from a linksys/cisco wireless router (4-port) wrt310n, that is connected to my cable modem. The airport is set and has the green light showing. The blu-ray player and dishnetwork receiver are plugged into two of the ports. The blu-ray player says it can't connect to the internet. The dish network receiver says it is connected, giving ip address/submask, etc.
If I take my macbook pro and turn off wireless and plug into the airport it will not connect to the internet.
What have I not done to allow wired connection to the airport extreme to connect to the net?
thanks
David

Thanks for the clarification of your setup.
Unfortunately, the bottom line here is that this is not going to work.
The ethernet ports on the Extreme will only be active if you configure the AirPort Extreme to "extend a wireless network". But, it can only "extend" a wireless network from another Apple router. It's not compatible for this purpose with your Cisco router or any other manufacturer's router.
If you are unable to connect the AirPort Extreme to your router using an ethernet cable, you might want to take a look at a pair of ethernet powerline adapters to accomplish the same task by using the wiring in your home to transmit the ethernet signal.
I should clarify that if you connect the Cisco and AirPort Extreme using ethernet, you would not use the "extend" setting on the AirPort Extreme. This is only used if the device is connecting to another Apple router.
Message was edited by: Bob Timmons

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

Cannot get my new AirPort Extreme to connect. Tried everything the manual suggests. Old router works fine.

AirPort Extreme will not connect--have tried everything manual suggests.

With what device will the AirPort Extreme not connect?
What is the make and model number of this device?
If this might be a cable modem, you do know that the modem needs to completely reset before it will communicate with the AirPort Extreme, correct?

Airport extreme will connect to some iPhones and iPads, but not all, and will not connect to MacBooks.

Why will the airport extreme not connect internet to macbook or some iPhones? It will connect to all our iPhone 6's and iPads but not to the MacBooks. The macbook says wi-fi has the self assigned ip address of ___,____,____,___ and will not be able to connect to the internet,

Have you done a full restart of the network in correct order?
Shut down everything.. OFF not standby.
Power on in order.
Modem.. wait 2min
Router.. (Extreme??) wait 2min
Macbook.. Only the Macbook.. do restart anything else yet.
Any luck??
No luck reset the Extreme to factory and redo the setup.. this time use all short names, no spaces and pure alphanumeric. Bonus for names <10 characters.
Use passwords with the same rules.. only can be 8-20 characters.. mixed case and numbers.
Try again with the Macbook..
No luck give explicit details of the setup of the whole network.

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver?

Depending on how you have your AirPort Extreme configured to work with the satellite receiver, it may or may not be possible to enable the Guest Network function.
We will need to check some settings on your Mac or PC, but in order to do that, we need to know what operating system you are using on your computer.
If you have a Mac, click the Apple icon in the upper left corner of the computer screen, then click About This Mac. Post back with the OS X Version number that you see there.

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro.

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

Airport Extreme, Cant connect to shared disk

Similar Messages

Maybe you are looking for