Airport Extreme Card Gone????

I have used WiFi before and all before at friends house and coffee houses. So it has worked before. I removed the Airport Icon from the task bar, and turned it off to save any battery life I could. I have been able to find it and turn it on and put it back into the dock while at friends house or where ever I would need it.
But for some reason now, my iBook doesn't recognize that it has one. I ran the hardware test and it says that it's found the card and it passes the test. But it's still missing to OSX. If I find it in any app. or sys. utility it shows that it's not there, or it thinks it is but when I click configure doesn't do thing. If I go to turn it back on it just says "Airport is Off" then the bottun NeXT to it says "Turn Airport Off" and is unclickable.
Im using 10.4.4 on a 14" iBook G4 (v4.2) btw.
Can someone please help? I would greatly appriciate any comments or opinions on what's going on. Thanks...
14" iBook G4 (4.2)   Mac OS X (10.4.4)  

Hello:
I had the same issue, I think. It started with power management issues with the battery performance menu. The AirCard Hardware would disappear from the toolbar, and then I would go into the network interface to get the "cone' back on my toolbar by selecticing better performance through the energy saver. I would then toggle the network on and off. This worked for five days. Eventually, my wireless card stopped working. I could not get the hardware to engage as the Mac did not see it.
Tech support indicated I was feeding my Mac bad power and the PMU which regualtes voltage to the circuitry had faulted. He had me do a PMU reset which is in described online with Apple. He did caution me to do the steps exactly as described. There could be issues from not doing so.
Thus, the Aircard issue for me was really a power issue. The aircard was merely a symptom.
I hope this helps

Similar Messages

  • Dead Airport Extreme card?

    For the last three days I have had issues with my G5 dual 2GHz and OS X 10.4.2, the latest updates to Airport software and firmware.
    The signal strength meter in the menu bar or in Internet Connect is greyed out and the connection cannot be made -- eventually it gets to the point where the G5 cannot even remember any of my precvious connections. The Macwireless.com widget shows the connection and signal strength as bouncing from 0 to about 70% for all connections that are still recognized, with each location bouncing from the top of the list to the bottom and then sometimes disappearing altogether. After a short while the locations don't reappear... Once they're gone, they're pretty much gone without a trace (Airport Admin either cannot connect to the Airport, telling me an error occurred while trying to access it, or it doesn't see anything to get an error message from).
    My G4 sits right next to the G5 and has shown no problems. Strangely, after a full day trying to troubleshoot this, the G5 started up today at full signal strength -- I'm using it now to write this message! Nothing has changed on this machine in the past week, except for me trying to get the Airport Extreme Card to function as it had for the month or two I've had it. Yesterday I lost connection altogether -- neither restarting the Mac nor a full shut down, wait a minute or two, restart would restore my connection. At one point, I shut down the machine for about an hour while I reseated the AE Card and let the computer become room temp (roughly 70 F). Still no go...
    After eliminating all the variables I could think of, I've come to the conclusion that the Airport card is probably bad -- possibly malfunctioning with heat build-up (?). Problem is, how do I show this problem to a tech? Especially since it's a half-hour drive to the closest Apple store and longer to a third-party Apple repair shop. And knowing that once it's been off for a while and is on a workbench, it will behave like all intermittently faulty equipment and work perfectly. :-/
    If anyone has trouble shooting suggestions, or can help me determine for sure that the card is the problem, please help!

    Hi Julia,
    Well, the card may have problems too, but I now think there's a software problem as others have suggested. It's odd because everything seemed fine for some time after applying the updates, so it appeared as if the card was bad or going bad. For me, I spent three days trying everything I could, including removing and re-seating the card, antenna wire and antenna, trying various configurations, resetting the Airport itself and so on. All to no avail.
    On the last day, I had the strangest situation, where Mail could not see the Airport and could connect to nothing, but Safari was able to access the Internet! I used Safari to access sites I hadn't visited in months just to be sure I wasn't seeing cached versions of the pages... Eventually though, Safari lost contact, and that was it for the day.
    After all that, the next day I turned on the Mac to see a solid connection that's been stable ever since except for the incident in my previous post where the Airport widgets knocked the connection out. Turning off those Widgets and closing Dashboard brought the connection back up immediately -- I haven't tried them again, and probably won't!.
    Once I had the solid connection, I used Onyx to repair permissions, optimise the System and to empty the Network cache. I also deleted the various Locations I'd set up in the Network Preferences to get it back to just the one connection to choose from. If you're comfortable with Onyx (or Cocktail or one of the other utilities) you could try at least clearing the cache(s) and repairing permissions.
    Have you tried a complete shut down and leaving the computer off overnight? Do you have anything set to open on startup that may try to connect with the Internet (like Mail or Safari)? Try removng them from your Startup Items (you can do this from the Dock -- click and hold on the icon and a mini menu should pop up with that option).
    Have you looked at the info in System Profiler, and does it show the Airport card? (you can access System Profiler from the About This Mac item in the Apple Menu and clicking the button: More Info...) The card should show up under Network>Airpport Card.
    Since you have a Powerbook, you have the option to take your computer to an Apple tech (Apple Genius at an Apple store, or to a dealer with a repair crew) and have them troubleshoot it. My guess is they'll end up reinstalling your OS and/or replacing the card... My G5 is far too heavy for me to throw it in the car -- and I found out the hard way yesterday that my computer is just 2 weeks out of warranty, so I'm ineligible for AppleCare. grrr... (my fault, but grrr...)
    Let us know if anything good happens -- best of luck!

  • Is there any Airport Extreme card diagnostic software?

    Is there any diagnostic software, or open firmware commands I can use to track down and diagnose problems with my Airport Extreme card?
    Are there any hardware tests that can be performed on it?
    At a higher level, is there anything I can do to diagnose problems with connections to an Access Point? (I don't have an Airport base station, unfortunately, I recall there being lots of tools for this).
    I've looked in /var/log/system.log, but it's not too helpful - contrast this with the vast amount of diagnostics you get on (say) a Linux system... can you enable some "debug mode"?
    Can I monitor received / transmitted signal strength from the card?
    iBook G4 ~900MHz   Mac OS X (10.3.4)   Airport Extreme card, D-Link DSL-G604T AP

    Don, thanks for the reply.
    In this case, it's not a problem with my ISP, as I can access Internet sites from other systems connected to my wireless/LAN router that are connected on the LAN.
    It's not a problem with the wireless side of the wireless router, as I can connect from other wireless systems.
    I do have problems where resetting the router is the only cure, but this isn't one of them!
    The symptoms I was having on the Mac side were:
    a) I saw only grey bars in the signal strength status icon - i.e. useless signal.
    b) I clicked it, and did 'Turn AirPort off', then 'on' again - this usually 'kicks' most problems.
    c) this didn't result in a good connection - Internet Connect showed that the AirPort Extreme card was connecting to the correct network and base station ID, then disconnecting after a few seconds.
    (Similar to that discussed at
    http://discussions.apple.com/thread.jspa?threadID=380635 )
    It looked like my AirPort Extreme had developed a fault (gone 'deaf')... I opened the iBook, reseated the card, clicked the antenna lead back in, but this had no effect.
    At this stage, I was ready to take the iBook into the Regent St. Genius Bar, but out of desperation, re-entered the connection details / WPA personal password in System Preferences.... and it all started working!
    So I don't currently have a problem, but would like to know if there is any hardware diagnostic for the card, so I can rule out hardware fault in future.
    Regards,
    Matt
    iBook G4 ~900MHz Mac OS X (10.3.4)

  • 20-in Intel iMac (early 2006) Tiger -- configuring Airport Extreme Card

    Hi -- I come from a mostly "not mac" background and am having difficulty diagnosing a slow internet connection -- and can't tell if I'm trying to use the right tool for the job. (I am using MAC OS X 10.4.11)
    My home network uses a Linksys WRT54G wireless router and I've got 3 computers that connect using the router (including the iMac) -- the other two are Windows-based machines. We've got a 2-story house and I've been moving the router and computers around the house a bit trying to come up with the best configuration for a good wireless connection (I'm going to be ordering a supplemental antenna, but don't have it yet).
    The two Windows machines (one using a relatively old PCI wireless card) get strong signals. I'm not even sure how strong a signal the iMac gets as I am not sure which utility allows me to see this. I do know that it has a painfully slow connection speed (at least web pages load at a crawl...).
    I've got an Airport Extreme Card (0x14E4, 0x89). Firmware: Broadcom BCM43xx 1.0 (4.170.46.9).
    I went to Apple's support downloads, and attempted to install firmware updates, but I am getting a message that indicates that these updates are not applicable to my card. I updated the Airport Utility software, but as far as I can tell that utility is looking for an Airport Extreme base that I don't have. Other than that I haven't seen any applicable information using that utility.
    I was hoping to reach a configuration area that would allow me to specify 802.11b or g, and allow me to specify the channel -- but other than in the internet sharing section I don't see a place that allows me to do this. (I've currently got our home network on a 802.11g network on channel 8.) We're using WPA personal encryption -- which does appear to be recognized by the Airport Extreme card.
    Am I missing something? I've got 3 "Airport" utilities but none of them seem to allow me to specifically configure the internal card. I've gone to "network" under System Preferences, and although I can see a "configure" button when I click on "Airport," it's pretty basic and doesn't allow me to set the channel or anything other than encryption & a password.
    I would appreciate any help you can give me. Is this card so outdated that I should invest in a newer one? Am I limited by my outdated OS? (I hesistate to upgrade OS's when things are working -- in the Windows environment at least newer isn't always better...) Thanks. mcaren

    Thank you Duane for your response.
    I have only noticed a huge difference in the connection speeds of my iMac and our other computers in the last 6 mos. to a year. I did notice an improvement in speed when using a Rosewill USB wireless adapter -- I had a good wireless signal but would intermittently lose connectivity (and their user support was basically nil...).
    I can't tell if I'm actually seeing an improvement in our other machines' connection (perhaps from the tweaking I'm able to do) or if in fact the iMac is slowing significantly. I think it's the latter. I've actually swapped out machines in the same position to see if location is at fault -- and I get no improvement in connection speed. I've had the iMac connected with ethernet to our router when possible because it has had such a slow wireless connection, but I needed to move the router recently and would like the iMac to stay in another room.
    I've also read a lot about connection speed issues with Airport, but these reports are usually blamed on Leopard updates (there might be similar Tiger issues, but I don't read about them...).
    Oh well. I'm hoping someone out there has some tricks up their sleeve as to how I can improve my wireless connection speed. Thanks for the help! mcaren

  • Airport Extreme Card in Mac Pro

    I was just about to take the plunge and order a Mac Pro Refurb this morning, but I have to have the Airport Extreme Card installed. I called the Apple Store business line and asked if I could pay to have that added and they said "No, the refurbs are already boxed and ready to ship". He said that the Airport Cards had to be soldered in and that I should take it to an Apple Service Center (closest one is 300 miles from where I live) and that it would take 2-days to install!
    Therefore, the Airport Card seems to be the deal-breaker - 50-bucks killing a $6,000 purchase (with accessories)!
    I know these Airport Cards do not require soldering, but I also know they have gone to great lengths to make it as hard as possible to install these after purchase in their infinate wisdom.
    All my research on installing the card myself post-purchase looks pretty sketchy and voids the warranty - so I guess refurbs are out and I will have to pay $600+ to get a BTO - I think I will pass.
    Message was edited by: ChoreoGraphics

    i just bought my mac pro a week ago.
    i asked what my options were for installing an airport card and they said they could do it at the apple store.
    i asked if i could do it personally and they said that i could, that it wouldn't void the warranty, but that they would do it for free, and it would be a difficult operation to try on my own.
    i know for a fact that there are some screenshots somewhere on the internets that shows this procedure. it is possible to do it yourself, but the screws are very tiny.
    good luck.

  • Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

    Hello friends,
    Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
    I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
    Alternatively, whether there is some configuration tweaking I can do to get it working.
    The Airport card is described in System Profiler as follows:
    Wireless Card Type: Airport Extreme (0x14E4, 0x88)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
    Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
    - nick

    Not sure what you mean "configure by ethernet."
    Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
    Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
    Thx
    -nick

  • Airport extreme card not working with leopard / G5

    I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
    The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
    1. Could it be a bad Airport extreme card?
    2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
    It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
    Message was edited by: anthonylkelly

    Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

  • How to setup a network setup with an airport extreme card in a mac pro

    I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
    I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
    I would have thought that the two networks would be detected automatically.
    Please some advice to solve this problem
    Imac G5; Mac pro   Mac OS X (10.4.4)  

    You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
    At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
    See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

  • Can't Connect to Internet using AirPort Extreme Card and DLink Router

    I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

    dannabee, Welcome to the discussion area!
    What Mac do you have?
    Do you have iMac G5 or a Power Mac G5?
    Did you install the AirPort Extreme card yourself?

  • Power Mac G5 fails to start up with Airport Extreme card in.

    Hello.
    I just received a 'new' Airport Extreme card for my Power Mac G5 1.8 (900fsb). I just installed it and it failed to start up with it in. The mac started up but without my Apple LCD and any USB devices. I did a PMU reset on the logic board and took out the Crucial 3rd party 512mb RAM and tried again but it won't start up. When I take the card out it's business as usual.
    Is it the card or the mac that's at fault? Has anyone had this problem too?
    Your help will be greatly appreciated.

    This problem can happen if:
    - the card has not been fully seated into its socket (doing that can take a firm push) or if you installed the card upside down
    - the card is defective
    - the card socket in the PowerMac G5 has broken or bent contact pins
    Check the installation you did with:
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    If you are sure the card has been properly installed, you are gong to have to either (a) try a different Airport Extreme card or (b) let an Apple dealer or service center take a look at your PowerMac G5.

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • Replacing Airport Extreme Card in Late 2008 MBP - What to buy??

    I've limped along for about 2 years now with my wifi constantly dropping while everyone else has a strong, constant signal. Doesn't matter where I am, it's always dropping and takes ages to reconnect. I've tried everything advised on the forum etc and am now about to buy something else as my main machine. I don't want to get rid of my MBP though so am planning on installing new memory and hard drive and while I'm doing that, want to replace the airport extreme card. The MBP will then become my secondary machine.
    Problem is, I can't figure out what I need to buy to replace the **** card! Seems like a lot I'm finding are either for machines that never had cards or for 2009 or newer. I just need to know which card to buy.
    OR . . . hearing that they are a pain to get to (keeping in mind I'll have the guts exposed while I upgrade the memory and HD) and fiddly . . . is there something external to plug into a USB I should get instead?
    Here are my specs:
    MacBook Pro, 15" Late 2008 (Unibody)
    2.4 Ghz Intel Core Duo
    2 GB 1067 Mhz DDR3 (which I'm about to upgrade)
    Mac OS X Lion 10.7.4 (11E53)
    Card Type:
    AirPort Extreme  (0x14E4, 0x8D)
      Firmware Version:
    Broadcom BCM43xx 1.0 (5.106.198.4.20)
      MAC Address:
      Locale:
      Country Code:
      Supported PHY Modes:
    802.11 a/b/g/n
      Supported Channels:
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake On Wireless:
    Supported
      AirDrop:
    Supported

    I'm already upgrading to 8GB of RAM and I'm planning on adding a Solid State Hard Drive since it will be a secondary machine. I really don't want to replace the optical drive too. At that point it's got new components in an old chassis with an old CPU.
    I've been to the Genius Bar (back when I lived in a place where there was one in town) and they couldn't replicate the issue but as soon as I left it started up again. There are times when it holds the signal for a good hour or more or days like today when it's dropping it every few minutes. It's completely random.
    No. This girl is going to go build her own PC with a fantastic GPU so as to kick some Diablo butt and the old Macbook Pro will only get used when I don't need it for anything serious. And I am most certainly not dropping another $2k + on a new MBP no matter how shiny they are! It's the end of an era as I've been using Macs exclusively for over 10 years now.

  • How do I know if my Airport Extreme Card is going bad?

    I have 3 computers on a home network. I have the router (Airport Extreme) in my guest house and it is working properly. The tenant is able to get her email and browse just fine. I also have a Airport Express in the front house that extends the signal via WDS. I have a 24 inch Intel iMac 2.4 that is connected to the network and runs fine. When I check in the Airport utility the iMac can see both routers. I have a Power Mac G5 2.0 that has a Airport Extreme card in my studio which is behind my garage. It shows that it is connected to the network and at full strength but I cannot browse or get mail. I tried to run diagnostics but when I do it does not find my network. I also cannot find either one of the routers from the Airport Utility even though the Mac is about one room away from the main router. I tried renewing the DHCP. I also even uninstalled and reinstalled the Airport Extreme Card with no luck. I can see my network from the Status Bar where the Airport Signal Strength is but again...cannot find the routers in Airport Utility nor find the network within the Networking Diagnostics.
    Any advise?

    Little antenna is still intact. Everything looks good on that part. If I take it out the bars go grey. Yes this system was working fine with very good download speeds up to 1mb/sec (usually 400 to 700 kbps) up until a few days ago.

  • What replacement Airport Extreme Card do I need for Macbook Pro 8.2?

    It looks like my Airport Extreme Card has failed, although the Blue Tooth  is fine. I'm assuming that I need to buy a replacement but am struggling to find what I need. I have a Macbook Pro 15" early 2011 i7 2.2ghz so just need to know what cards are compatable.
    It's been a slow failiure, over a couple of months but now it is not even recognised in the System profiler. I am happy to open the case and install a new card, I just need t know what will work. Is there a better card than the original out there, or even an upgrade? I've upgraded the Ram and had to change the HHD already, so as a machine it's starting to resemble the Philosopher's Axe...
    Any advice would be greatly appreciated!

    Hi Ralph,
    Thanks for the speedy response!
    I"ve had the case open when I changed the HHD and Ram, and can seen where the card slots in. It's held by a supporting arm which lifts up when disconected from the Logic Board. it's weird looking inside, as you can see there are many of the same componants I've seen in other laptops. It is a tidier build though. I'm confident that if I detach the 3 antener conectors and remove the retainer screws a new card will fit back in.
    The Genius Bars here in London are highly over subscribed, and I don't think I have the time or budget for that.
    I'll keep plugging away, and see what happens. I'm almost getting used to being tethered to the Ethernet cable. I've only tripped over it 20 times a day!
    Take it easy.

  • I have a iMac with a built in airport extreme card.  Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

    I have a iMac with a built in airport extreme card.  Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

    Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

Maybe you are looking for

  • Windows 7 Product Key Blocked - Not Genuine notice

    My T420 is 3 years old and suddenly yesterday I got the notices and black screen saying "This copy of Windows is not genuine." And nag screens about it roughly every half hour (and annoyingly at boot-up). I tried several fixes online, including re-en

  • How to track an iPod touch without icloud?

    I need to find my iPod but what if someone restored it how can i find it then.

  • How to turn off automatically switching to sleep mode?

    Hi. I want to disable automatically Switching to Sleep mode. how can I do this? in settings tick allmoved to the end of the right, but he falls asleep.

  • How do i convert my music to high res?

    I need to change my music in my library from 128 kpbs AAC encoder to the highest sound quality, can anyone tell what the highest sound quality is and how to covert all my music to that setting?

  • ODI Installation

    hello, I have installed follwing on my machine: Hyperion Planning 9.3.1 EAS Essbase Shared service Workspace Reporting studio ALl the above are working fine. Now i wish to install ODI on my machine. I downloaded ODI from edelivery and i can see only