Airport Extreme Card serial No.?

Hi all, does anyone know of a way to find out the serial number of an Airport Extreme Card without removing it from my machine or looking at the box (which I don't have)?
TIA GG

I just got the card used on eBay this week & wanted to see when it may have been purchased for warranty purposes. I guess I'll need to turn off & pull it out again.
GG

Similar Messages

My eMac can't find installed airport Extreme card

Hello everyone,
Having bought a netgear wireless modem for a wi-fi connection, I was told to install an airport extreme card on my eMac, which I did - several times. But the eMac says he can't find when I look for it, either in the internet setup or in the general information about the hard and software. I also installed the accompanying software. Why can this be ? Thanks for your advice!
eMac Mac OS X (10.4.7)

It's an eMac (USB 2.0) model. I'm not certain I should try to push the card in more ? Are those cards defective frequently ?
Which eMac do you have? You can use KB 86325, eMac: How to locate the serial number
and identify your model to determine which model
you have.
If your eMac is the "eMac (ATI Graphics)", "eMac (USB
2.0)", or "eMac (2005)" the AirPort Extreme card is the correct
wireless card.
If your eMac is the "eMac", it requires the original
AirPort card and is not compatible with
the AirPort Extreme card.
Assuming that your eMac is compatible with the AirPort Extreme card, one or more of
the following must be true if the eMac is not
detecting the card.
The card is not installed
correctly.
The card is defective.
The
eMac's motherboard is defective.
eMac Mac OS X (10.4.7) 1.25 GHz / 768 Mo DDR SDRAM

Airport Extreme Card for a Power Mac G5

Hi!
I have a power Mac G5 (1.8 GHZ 512 MB 160 GB) Serial Number XB40**QES. I want to buy an airport extreme card and found here on apple.com that the airport card I need is the M8881LL/A. But everyones at every store I´ve been keep telling me that a I need a special card for it, because the regular card just won´t fit the slot. Is this true?
Thank you in advance for any help you can provide.
<Edited by Moderator>

Hi-
Welcome to Discussions!
I need a special card for it, because the regular card just won´t fit the slot. Is this true?
No.
The "special" airport extreme/bluetooth card is only for dual core Late 2005 G5's. Your 1.8ghz G5 can use the Airport Exteme Card M8881LL/A.

Computer won't recognize Airport Extreme Card

Okay, I need a little help. I bought an Airport Extreme card for my eMac today, which is what my manual told me I'd need to connect to a wireless Internet connection.
I followed the instructions to install it exactly, but the computer won't recognize that it's there. It still says "no information available" when I go look at the Airport card settings.
I'm not sure if it's a fault of mine, the card's, or the computer's. When I insert the card, should it snap into place? Should it slide out easily? How can I tell if it's in properly?
If anybody can help out, it'd make my year. I am dying to get this high-speed Internet set up. Thanks.

surfingbaku, Welcome to the discussion area!
Use the information in KB 86325, eMac: How to locate the serial number and identify your model to identify which type of eMac you have.
If you have one of these eMacs
eMac (ATI Graphics)
eMac (USB 2.0)
eMac (2005)
you require the AirPort Extreme card.
Any other eMac requires the original AirPort card.
If you are using the correct card and it is not being recognized, one or more of the following must be correct.
The card isn't installed correctly.
The card is defective.
The eMac's motherboard is defective and not recognizing the card.

Very high latency on my MBP 3,1 (mid 2007) with airport extreme card 0x168C

Hi
I wanted to let you know that i filled a bug report concerning a problem involving a MacBookPro3,1 and my airport extreme card (AirPort Extreme (0x168C, 0x87) Firmware Version 1.4.16.2)
If you've got any feedback, please feel free to share it with me.
Here's the bug report:
Hello
I'm experiencing very high latency on my MBP when connected using Wi-Fi in my living room and I believe this is a software bug.
This is the trace of my ping test to my router (5m from me):
macbookpro:~ laurent$ ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254): 56 data bytes
64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=1536.229 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=536.642 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=3444.466 ms (DUP!)
64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=2547.260 ms
64 bytes from 192.168.0.254: icmp_seq=3 ttl=64 time=2671.552 ms
64 bytes from 192.168.0.254: icmp_seq=4 ttl=64 time=1671.272 ms
64 bytes from 192.168.0.254: icmp_seq=5 ttl=64 time=2619.991 ms
64 bytes from 192.168.0.254: icmp_seq=6 ttl=64 time=1619.350 ms
64 bytes from 192.168.0.254: icmp_seq=7 ttl=64 time=2362.474 ms
64 bytes from 192.168.0.254: icmp_seq=8 ttl=64 time=1362.662 ms
64 bytes from 192.168.0.254: icmp_seq=9 ttl=64 time=363.461 ms
64 bytes from 192.168.0.254: icmp_seq=10 ttl=64 time=1407.557 ms
64 bytes from 192.168.0.254: icmp_seq=11 ttl=64 time=1020.437 ms
64 bytes from 192.168.0.254: icmp_seq=12 ttl=64 time=119.570 ms
^C
--- 192.168.0.254 ping statistics ---
14 packets transmitted, 13 packets received, +1 duplicates, 7% packet loss
round-trip min/avg/max/stddev = 119.570/1663.066/3444.466/937.468 ms
These are the details of my network when alt clicking on the network icon:
ca:69:50:37:c7:b2
Channel: 5
RSSI: -54
Transmit Rate: 54
I'm using Channel 5 where my router is the only device available (checked with iStumbler and KissMac).
I compared these results with another computer sitting at the same place:
This is the trace of my ping test to my router using a PC laptop:
C:\Documents and Settings\Laurent>ping -t 192.168.0.254
Envoi d'une requête 'ping' sur 192.168.0.254 avec 32 octets de données :
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=2 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=3 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=6 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=8 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=4 ms TTL=64
Réponse de 192.168.0.254 : octets=32 temps=1 ms TTL=64
Statistiques Ping pour 192.168.0.254:
Paquets : envoyés = 16, reçus = 16, perdus = 0 (perte 0%),
Durée approximative des boucles en millisecondes :
Minimum = 1ms, Maximum = 8ms, Moyenne = 3ms
(PC: Win XP SP3 with Linksys Wi-Fi card)
Obviously, my Mac has very high latency where my PC works as expected.
I tried resetting the PRAM, but i didn't affect my results.
I tried updating Airport with the latest AirPort Client Update (http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro), but my hardware wasn't eligible for that update (Mid 2007 MacBookPro).
I believe this isn't a hardware bug because i get acceptable ping results when next to my router or in other rooms of my flat.
Can you help me with that bug ?
Regards,
Laurent
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W874551DX91
Hardware UUID: 00000000-0000-1000-8000-001B63B19195
Sudden Motion Sensor:
State: Enabled
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.0.2
IPv4:
Addresses: 192.168.0.2
Configuration Method: DHCP
Interface Name: en1
NetworkSignature: IPv4.Router=192.168.0.254;IPv4.RouterHardwareAddress=00:07:cb:3e:04:ef
Router: 192.168.0.254
Subnet Masks: 255.255.255.0
DNS:
Server Addresses: 212.27.40.241, 212.27.40.240
DHCP Server Responses:
Domain Name Servers: 212.27.40.241,212.27.40.240
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.0.254
Server Identifier: 192.168.0.254
Subnet Mask: 255.255.255.0
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1e:52:72:05:2c
Media Options:
Media Subtype: Auto Select
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x87)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.16.2
Current Wireless Network: kalamar
Wireless Channel: 5

Ok, I must have jinxed myself.
High latency with my Negear WPN824v3. As previously mentioned, the other wireless computers connect fine. Latency remains regardless of the power connected or not.
Please advise.
PING 192.168.0.1 (192.168.0.1): 56 data bytes
64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=11.607 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=7280.106 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=9209.019 ms
64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=8237.475 ms
64 bytes from 192.168.0.1: icmp_seq=5 ttl=64 time=7262.603 ms
64 bytes from 192.168.0.1: icmp_seq=8 ttl=64 time=4313.763 ms
64 bytes from 192.168.0.1: icmp_seq=9 ttl=64 time=3336.361 ms
64 bytes from 192.168.0.1: icmp_seq=10 ttl=64 time=2339.579 ms
64 bytes from 192.168.0.1: icmp_seq=11 ttl=64 time=1344.110 ms
64 bytes from 192.168.0.1: icmp_seq=12 ttl=64 time=345.132 ms
64 bytes from 192.168.0.1: icmp_seq=13 ttl=64 time=1191.119 ms
64 bytes from 192.168.0.1: icmp_seq=14 ttl=64 time=3969.730 ms
64 bytes from 192.168.0.1: icmp_seq=15 ttl=64 time=3992.111 ms
64 bytes from 192.168.0.1: icmp_seq=16 ttl=64 time=3692.648 ms
64 bytes from 192.168.0.1: icmp_seq=17 ttl=64 time=2927.634 ms
64 bytes from 192.168.0.1: icmp_seq=18 ttl=64 time=2130.216 ms
64 bytes from 192.168.0.1: icmp_seq=19 ttl=64 time=1437.424 ms
64 bytes from 192.168.0.1: icmp_seq=20 ttl=64 time=2385.203 ms
64 bytes from 192.168.0.1: icmp_seq=21 ttl=64 time=1393.622 ms
64 bytes from 192.168.0.1: icmp_seq=22 ttl=64 time=396.783 ms
64 bytes from 192.168.0.1: icmp_seq=23 ttl=64 time=1.295 ms
64 bytes from 192.168.0.1: icmp_seq=24 ttl=64 time=115.793 ms
64 bytes from 192.168.0.1: icmp_seq=25 ttl=64 time=3.137 ms
64 bytes from 192.168.0.1: icmp_seq=26 ttl=64 time=10.240 ms
64 bytes from 192.168.0.1: icmp_seq=27 ttl=64 time=2.709 ms
64 bytes from 192.168.0.1: icmp_seq=28 ttl=64 time=9.958 ms
64 bytes from 192.168.0.1: icmp_seq=29 ttl=64 time=1818.371 ms
64 bytes from 192.168.0.1: icmp_seq=30 ttl=64 time=1470.613 ms
64 bytes from 192.168.0.1: icmp_seq=31 ttl=64 time=472.520 ms
64 bytes from 192.168.0.1: icmp_seq=32 ttl=64 time=2255.417 ms
64 bytes from 192.168.0.1: icmp_seq=33 ttl=64 time=18198.039 ms
64 bytes from 192.168.0.1: icmp_seq=34 ttl=64 time=23288.761 ms
64 bytes from 192.168.0.1: icmp_seq=35 ttl=64 time=25150.840 ms
64 bytes from 192.168.0.1: icmp_seq=36 ttl=64 time=26813.832 ms
^C
--- 192.168.0.1 ping statistics ---
63 packets transmitted, 34 packets received, 46% packet loss
round-trip min/avg/max/stddev = 1.295/4906.111/26813.832/7241.136 ms

What Airport Extreme card do I need ?

Hello Group....here is the problem....my youngest boy just managed to acquire a eMac computer.
It is a G4-1GHZ/512MB/40 G HD and has a HD/DVD/CD - RW/56K MDM
The serial number of the eMac is G03500STPP1 (This serial number I can not relate to any searches on the internet)
I am sure it requires a Airport Extreme Card since it does have ATI Graphics and also because I just now received an AirPort card I had ordered a week ago and found it does not fit and the PIN configuration in the slot the card goes into does not seem to match this card I purchased.....My mistake....
Anyway....I know it is a AirPort Extreme card I need but which one ?
I have looked on eBay but there seems to be several different kinds......does anyone have any idea ?
Also,if anyone has any answers to this,could yo ualso include any links to where I might find it as well ? That would be helpful for further reference should I have any trouble with this eMac.
Thank you for your time.

Hello Group....Just got the AirPort Extreme Card in the mail and I put it into the eMac and in 10 minutes I was surfing the net.
Just incase others might be reading this with the same question about cards.....
The eMac in question is a eMac (ATI Graphics)(CTO) built in 2003
The Airport Express Card is Model A1026
If you open DVD cover and then remove the black plastic plate held there with 2 screws,you can look back into the slot that the card slides into.If you see that the slot is in two sections,that is there is a gap dividing the row of pins.....that is to accommodate the AirPort Extreme stab end as in the picture above.
If the slot you have is continues then you need a regular AirPort Card.
Oh ya....the eMac had been wiped clean and the original OS was installed so after installing the AirPort Extreme card we did about 2 hours of updates.......LOL.
Thank again to all that replied.

G4, Airport vs Airport Extreme Card

I just signed up for high speed internet 12 Mbps. I am using a LINKSYS -g wireless router. So my Power Book G4 Laptop works at almost 12 Mbps with the Airport Extreme Card but my G4 Desktop only runs a about 2.5 Mbps. According to my serial number I have a Quick Silver G4 Desktop, it has a Airport Card.
Is this normal and if so how do I get the Desktop up to speed?

Hi-
The Airport Extreme 802.11g theoretical is 54 Mbit/s, whereas the Airport 802.11b is 11 Mbit/s.
Remove overhead and loss for overlapping channels, etc., and your results sound about right.
To get the QS faster will require a 802.11g compliant wireless adapter, such as a PCI adapter from OWC.
http://eshop.macsales.com/search/wireless+PCI

New airport extreme card is not detected

I brought a new airport extreme card and installed as instructed but my computer is not detecting it at all. Im new to using a Mac, so please can someone let me know what I'm doing wrong? If you need more info please ask.
emac Mac OS X (10.3.9)

this is definately the correct card...
How do you know? To identify which eMac you have, you can use KB 86325, eMac: How to locate the serial number and identify your model. Then you will be able to determine if you need the AirPort card or AirPort Extreme card.
What kind of keyboard are you using?
The command key probably has an Apple symbol.
Here are some other symbols for those keys:

Need airport extreme card (and installation disk?) for OS X 10.2.4

So when I got my emac in 2003 it didn't come with an airport extreme card. but now I need to get online and am unable to hook up with a landline to our current, only wireless, router. I can't upgrade my OS X and spend tons of money for ram and the new card. So I'm looking for the card that would work with my version of OS X. Please give me any info or websites, I haven't had any luck myself!

LaurieP, Welcome to the discussion area!
The version of OS X installed has nothing to do with which card you need.
The original eMacs require the original AirPort card. That is the only card compatible with the internal slot.
Later eMacs require the AirPort Extreme card. That is the only card compatible with the internal slot.
You can determine which eMac you have by using KB 86325, eMac: How to locate the serial number and identify your model. The "eMac (ATI Graphics)", "eMac (USB 2.0)", and "eMac (2005)" all require the AirPort Extreme card.

Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

Hello friends,
Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
Alternatively, whether there is some configuration tweaking I can do to get it working.
The Airport card is described in System Profiler as follows:
Wireless Card Type: Airport Extreme (0x14E4, 0x88)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
- nick

Not sure what you mean "configure by ethernet."
Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
Thx
-nick

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

How to setup a network setup with an airport extreme card in a mac pro

I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
I would have thought that the two networks would be detected automatically.
Please some advice to solve this problem
Imac G5; Mac pro Mac OS X (10.4.4)

You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

Can't Connect to Internet using AirPort Extreme Card and DLink Router

I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

dannabee, Welcome to the discussion area!
What Mac do you have?
Do you have iMac G5 or a Power Mac G5?
Did you install the AirPort Extreme card yourself?

Power Mac G5 fails to start up with Airport Extreme card in.

Hello.
I just received a 'new' Airport Extreme card for my Power Mac G5 1.8 (900fsb). I just installed it and it failed to start up with it in. The mac started up but without my Apple LCD and any USB devices. I did a PMU reset on the logic board and took out the Crucial 3rd party 512mb RAM and tried again but it won't start up. When I take the card out it's business as usual.
Is it the card or the mac that's at fault? Has anyone had this problem too?
Your help will be greatly appreciated.

This problem can happen if:
- the card has not been fully seated into its socket (doing that can take a firm push) or if you installed the card upside down
- the card is defective
- the card socket in the PowerMac G5 has broken or bent contact pins
Check the installation you did with:
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
If you are sure the card has been properly installed, you are gong to have to either (a) try a different Airport Extreme card or (b) let an Apple dealer or service center take a look at your PowerMac G5.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

Airport Extreme Card serial No.?

Similar Messages

Maybe you are looking for