Airport Extreme Card wont connect to D-Link DIR-615 (wireless N router)

Hi, I got an old Mac G5 that has the airport extreme card in it and can't connect to the internet through with my D-Link DIR-615. I tried a couple options on a MAC but didn't work. I have a Laptop running Windows Vista and had no problem connecting. I'm using WPA for security and my password has 31 characters. Do you guys think That I have to change the length of my password to 26 or even less? Is there any guide that you guys may know that cuold help me on this issue?
Thanks a lot.
Masrocha

Password
40-bit hex
40-bit ASCII
128-bit hex
128-bit ASCII
LEAP
This would be telling me that your G5's AirPort is NOT "seeing" the D-Link's wireless network as encrypted with WPA, but with WEP instead. This typically can be caused by either the D-Link's current configuration is incompatible with the AirPort card or that there is something amiss with the AirPort card itself.
BTW, My D-Link has WEP, WAP-Personal and WAP-Enterprise
Ok, we will want to stick with either WEP or WPA-Personal.
We now have two choices: 1) Continue to troubleshoot additional configuration changes to the D-Link to try to get WPA to work with your G5, or 2) Switch to the lower strength encryption: WEP.
Which would you prefer to try?

Similar Messages

Setting up D-Link DIR-615 wireless N router with a macbook pro

Hello all.
I am trying to setup a D-Link DIR-615 wireless N router with my macbook pro. I got the router, opened it, put in the startup CD, and nothing works.
I went to the D-Link site and it says that the CD is not compatible with mac's, but to look on pages 10-15 in the user manual ( on the CD), which I did and found nothing related to setting up the router on my mac.
So I'm at the very beginning (putting in the initial CD) of setting this up, and wondering how to do it. Can anyone guide me through it or point me to a thread or online description of how it's done. I have very little computer background but I can pick it up decently when I have to, so please help as I will be very grateful. Thanks,
Jonathan

Unfortunately as with most routers it will be a manual affair that is quite involved. The first thing is to connect to the router over ethernet, so you should connect the cable supplied between the computer and the router and turn the router on. Go to System Preferences and open the Network panel, make sure the DCHP setting is automatic, you should have a connection if it is already on auto, there will be numbers in all the boxes when connected. In the documentation for the router you should find an IP address for the web interface along the lines of 192.168.0.1 (this seems to be the correct one for D-Link), open Safari (or another browser if you want)put this number in the address bar and press return. There will probably be a request for password at this stage, this will be in the documentation or on the bottom of the router, fill it in and you will get to the web interface. You should then be able to follow the instructions in the router documentation to set it up. It should be fairly easy through the basic setup procedure as long as you know your internet settings.

IPhone 3G won't connect to D-Link DIR-655 Wireless N Router

My wife and I picked up iPhone 3Gs last week, and we got home and instantly had issues connecting to our home's Wi-Fi. I assumed at first it was an iPhone issue, but think it's likely more an issue with my router. The router is brand new (two months old). I have updated the firmware to the most current (version 1.11). Both iPhones apparently connect to the router (they show Wi-Fi bars and it shows full strength), however, when I attempt to access the iTunes store, I got an error that it fails to connect, that I need to be connected to via Wi-Fi to access. I've tried everything with the router I can think of (turning of wireless security, using only WPA vs. WPA2, and having a very simple password). With each setting, it shows the phone is connected, but iTunes says I'm not. I've successfully connected to 5 other wi-fi routers without issue. Some have similar settings to my home router. Other router models I've connected to include Linksys, Trendnet, and D-Link. However, none of those have been a N router. I set my DIR-655 to work only in the wireless b and g range only, reset networking on my phones, but still doesn't work. I just don't know if there's something I'm overlooking on the settings that might keep the devices from working properly together. Any thoughts.

If it works on other networks it is most likely a compatible issue with your router (as you have surmised). Do you have MAC filtering enabled on your router? If so, have you entered the MAC address of the phone (In Settings/General/About it is called WiFi Address).
When you are connected to your router go to Settings/WiFi and tap the arrow to the right of the network name. Look at the IP address of the phone. If its pattern is 169.254.x.y this means your router is not assigning an IP address to the phone. That is almost certainly a router issue.
Next look at the DNS address. Is it the same as the DNS address on your other computers? As an experiment try changing it to a public DNS address like the ones provided by OpenDNS (www.opendns.com), 208.67.222.222.

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

Using airport extreme card to connect iPhone to internet of mac ?

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?

Read here:
http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

IMac G4-can i use a Airport Extreme card to connect??

I'm a bit confused..which macs let you use an airport extreme card, which are for the normal airport cards, and which require 'something else'??!
I have a iMac G4, not sure exactly which OS (I know it's OS x but not what the numbers are). It's around 4 years old but I've been told I may need to get something else as well as the airport cards? It's passed on info so sorry I can't be more accurate!
It's to connect to a MIMO belkin router, apparently that's fine if i get the right thing
any help would be greatly appreciated!
thanks
imac G4 Mac OS X (10.3.2)

Duane--please forgive me if I am not doing this right, but I am new to the discussion area and haven't figured out how to post a new question for everyone to ask. I have a 17inch flat panel iMac, 800mhz processor speed and am looking to purchase an airport card from e-Bay. I see various people selling and I know I need the original airport card. But my question is: are there more than one models of the original airport card? For instance, one seller is listing an original airport card model # M7600LL/A at a certain price, and it lists my computer as being one of the computers that this card will work with. Another seller has an original airport card model # M7600LL/E for a much lower price. But the description is rather bare of information. Is this the same card just at a different price? Or are there different models of the original airport card? Thanks in advance!
17 inch Flat panel iMac, 800mhz Mac OS X (10.3.9)

Airport Extreme card cannot connect in the 10.4.2 G5

We have installed the extreme card and it sees the network, and others, but simply will not connect " There was an error etc" anybody any ideas.....

IMac G5, or PowerMac G5?
For either model, make sure the internal antenna connector is FULLY seated into its socket on the Airport card - this takes a fair bit of force.
If a PowerMac G5, make sure the external T-shaped antenna is connected to its socket on the rear panel.

Fed up with Airport Extreme card errors connecting to wireless network

Since buying my black MacBook in June I have been 'enjoying' completely haphazard connection to my (encrypted) home wireless network, and been forced to sponge off some neighbour's open network half the time, as I keep getting the message 'there was an error connecting to the ... wirless network'.
I HAVE connected to my network successfully, and from time to time the ghost in my machine does let the MacBook connect to it all by itself, so there is no compatibility issue as such. I had hoped that downloading the most recent Airport Extreme Firmware Update would help, as it promised to 'improve reliability', but alas. I've tried downgrading to 10.4.9 as somebody suggested on these forums, but that didn't make any difference, so I'm now back on 10.4.10.
The whole thing is driving me completely bonkers, so if anyone has any suggestions (or would consider joining me for a complaint to the Advertising Standards Authority about Apple's misleading advertisements promising that 'it just works'...) I would be most grateful.

Don't order an ethernet cable from the Apple Store, any geek worth his salt might have one in his back pocket or a few in his bag (probably calls it a "patch cord".) Even Target sells them for $7-8 but anyone in IT buys them in bulk for $1-2 or makes their own for even less (materials cost, anyway, but they do take a bit of time and skill to put the ends on correctly).
As for the wireless, I moved from a Powerbook G4 to a MBP 17" to a new MBP 15," and I have been very disappointed in how less stable the MBP wireless connection is than my old PB G4 or even my wife's four year old iBook as she sits on the couch near me merrily surfing away while I grumble. However, I have a cheapy SMC wireless router - I don't have the problem at work where we have Airport base stations or at many other places with different brand routers - it's tough to nail down, and it's **** aggravating, especially when working on a deadline.

D-Link DIR-655 wireless xtreme router

hey is the D-Link DIR-655 xtreme wireless router compatible with leopard?
Message was edited by: InstincTx28

hey there InstincTx28,
since your post doesn't seem to have much to do w/ video production, i suggest you post in the Discussion for MacBook>Intel>Networking to appeal for an answer.
good luck.

Disabling AirPort Extreme Card auto-connect?

Is there a way to set one wireless network as the default or chosen one? I have iMac G5 and it is constantly reverting to a neighbor's network even though the signal is weaker. I can manually switch it back to mine but in time it will find the other again. Any suggestions?

Choosing your preferred AirPort network

D-Link DIR-615/Macbook detecting but not connecting

This is my first post on the forum.
So I went on a vacation back in January for about a week, but during that week I unplugged my D-Link DIR-615 Wireless N router and modem (Toshiba, Time Warner), just so I wouldn't have people attempting to connect to it for any reason by any means. Fair enuf, right?
I get home, connect the mac, modem, router. Airport will detect the network, but will not "transmit" the internet, won't pull up any webpages.
Any ideas? I've checked the through some of the other posts, but it's kind of hit and miss.

This is because your Mac is connecting to your router but is failing to obtain an IP address via DHCP.
Is your Mac still set up to obtain an address automatically via DHCP?
If so, try the following sequence:
1) Disconnect from your D-Link
2) Power off the cable modem and router.
3) Power on the cable modem and wait until its status lights indiciate it is connected to its network.
4) Power on the D-Link and wait until its status lights state it is connected.
5) Try to reconnect to the D-Link on your Mac.

Is there any Airport Extreme card diagnostic software?

Is there any diagnostic software, or open firmware commands I can use to track down and diagnose problems with my Airport Extreme card?
Are there any hardware tests that can be performed on it?
At a higher level, is there anything I can do to diagnose problems with connections to an Access Point? (I don't have an Airport base station, unfortunately, I recall there being lots of tools for this).
I've looked in /var/log/system.log, but it's not too helpful - contrast this with the vast amount of diagnostics you get on (say) a Linux system... can you enable some "debug mode"?
Can I monitor received / transmitted signal strength from the card?
iBook G4 ~900MHz Mac OS X (10.3.4) Airport Extreme card, D-Link DSL-G604T AP

Don, thanks for the reply.
In this case, it's not a problem with my ISP, as I can access Internet sites from other systems connected to my wireless/LAN router that are connected on the LAN.
It's not a problem with the wireless side of the wireless router, as I can connect from other wireless systems.
I do have problems where resetting the router is the only cure, but this isn't one of them!
The symptoms I was having on the Mac side were:
a) I saw only grey bars in the signal strength status icon - i.e. useless signal.
b) I clicked it, and did 'Turn AirPort off', then 'on' again - this usually 'kicks' most problems.
c) this didn't result in a good connection - Internet Connect showed that the AirPort Extreme card was connecting to the correct network and base station ID, then disconnecting after a few seconds.
(Similar to that discussed at
http://discussions.apple.com/thread.jspa?threadID=380635 )
It looked like my AirPort Extreme had developed a fault (gone 'deaf')... I opened the iBook, reseated the card, clicked the antenna lead back in, but this had no effect.
At this stage, I was ready to take the iBook into the Regent St. Genius Bar, but out of desperation, re-entered the connection details / WPA personal password in System Preferences.... and it all started working!
So I don't currently have a problem, but would like to know if there is any hardware diagnostic for the card, so I can rule out hardware fault in future.
Regards,
Matt
iBook G4 ~900MHz Mac OS X (10.3.4)

PB's Airport Extreme card not staying connected - please help diagnose

My thread Airport extremem card can't hang onto wifi signal - what to do? in the "Getting Online" forum hasn't generated a solution, so I'm trying here too.
In the past few weeks, my airport signal bounces around and randomly disconnects me. It goes from no signal (indicated) to 3 bars then bounces around. It occurred with my own Airport Extreme card (in the PB) and my Belkin router, and the library's wifi.
The problem may have started after an erase-and-install of Panther with an upgrade using the combo 10.3.9. The only security updates I see receipts or packages of are SecUpd2005-004Pan.pkg, SecUpd2007-002Pan.pkg, SecurityUpdate2004-10-27Pan.pkg.
The usual troubleshooting (Permissions, Chrons, Disk Warrior) didn't solve anything. Since first posting about this problem I've reapplied the 10.3.9 combo. I tried changing the channel on the router and setting it to Protected Mode.
"Protected Mode
NOTE: In most situations, best performance (throughput) is achieved with Protected Mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected Mode ON."
I then installed Airport 4.2 update because Software Updater presented it as an option.
Until today iStumbler and MacStumbler were showing 29-35% signal strength with no noise. As of today, iStumbler is showing intermittent noise of ~14-21%, but MacStumbler is not. (It was constant when I tried channel 9 and changing the router's back to 10 made it intermittent.)
The router is serving a desktop computer via ethernet so I can't move it. I have reset the router and cable modem several times with no improvement.
Does anyone have any ideas what I can do? Thanks.

I would have come back to edit this, to say that the dropping signal problem came back since the 10.3.9 combo but I couldn't. The darn wifi signal was lost for something like 7 minutes.
The PB was sitting in exactly the same place and toggling airport on and off wouldn't reconnect it. It generated many lines in the console. Anyone know what this means?
Aug 5 12:05:04 Marlinespikes-Computer kernel: AirPort: Link DOWN (AP deAuth 0)
Aug 5 12:05:04 Marlinespikes-Computer kernel: handleAirPortChangesChannelWL fails because POWER IS OFF (the mask is correcty set however)
Aug 5 12:05:13 Marlinespikes-Computer kernel: AirPort: Link DOWN (out-of-range 0)
Aug 5 12:05:13 Marlinespikes-Computer kernel: handleAirPortChangesChannelWL fails because POWER IS OFF (the mask is correcty set however)
Aug 5 12:05:17 Marlinespikes-Computer kernel: AirPort: Link DOWN (out-of-range 0)
Aug 5 12:05:17 Marlinespikes-Computer kernel: handleAirPortChangesChannelWL fails because POWER IS OFF (the mask is correcty set however)
2007-08-05 12:05:20.931 iStumbler[3432] WirelessCreateScanResults context:0x382A50 err: 0x88001003
2007-08-05 12:05:29.930 iStumbler[3432] WirelessCreateScanResults context:0x382A50 err: 0x88001003
2007-08-05 12:05:45.326 System Preferences[4011] connection:didFailWithError: can’t find host
Aug 5 12:05:53 Marlinespikes-Computer last message repeated 5 times
2007-08-05 12:05:56.930 iStumbler[3432] WirelessCreateScanResults context:0x382A50 err: 0x8800100B
2007-08-05 12:06:32.930 iStumbler[3432] WirelessCreateScanResults context:0x382A50 err: 0x8800100B
Aug 5 12:08:07 Marlinespikes-Computer last message repeated 14 times
: object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (inconsistant sizeofcmds field in mach header)
Aug 5 12:09:59 Marlinespikes-Computer last message repeated 8 times
Aug 5 12:11:55 Marlinespikes-Computer lookupd[3999]: NetInfo connection failed for server 127.0.0.1/local
Aug 5 12:11:56 Marlinespikes-Computer lookupd[3999]: NetInfo connection failed for server 127.0.0.1/local
Aug 5 12:11:56 Marlinespikes-Computer kernel: AirPort: Link Active: "belkinrouter" - 0011501e80e9 - chan 8
Aug 5 12:11:56 Marlinespikes-Computer kernel: handleAirPortChangesChannelWL fails because POWER IS OFF (the mask is correcty set however)
Aug 5 12:12:05 Marlinespikes-Computer configd[129]: SecKeychainFindGenericPassword err= -25308 ( =0xffff9d24) (current= belkinrouter)
(event handler):Can't find variable: autoSave
(event handler):Can't find variable: autoSave

AirPort Extreme Card recognizes networks but won't connect - HELP!

hello forumites,
firstly, if this post is similar to one that has already been well-read and widely responded to, i apologize and ask that you respond with the link to said thread.
my issue pertains to an iBook G4 (circa 2004 i believe) running OS X 10.4.11 with an apple-installed AirPort Extreme card (firmware version 405.1). i have never had any problems with the card previously, but in the last week it has quite suddenly ceased to connect to any wireless network i attempt to log on to (both password protected and non). despite the card's sudden inability to connect, it still is able to recognize all the wireless networks in my location (i know this as the networks are still listed in the AirPort status pull-down menu).
in an effort to fix the issue i have:
restarted the card (turned it off and on)
restarted the computer (many, many times)
used the network diagnostics program
used the network setup assistant program
attempted to connect through the system preferences (network)
attempted to connect through internet connect
did a complete erase and install
still nothing.
anyone had a similar problem? anyone find a way to fix it?
thanking you in advance for your brilliance and time,
brad

firstly, tesserax, a tremendous thank you for your help. unfortunately, i tried each step you suggested, but the problem continues.
step 1: i have tried and failed to connect to several different networks in a handful of locations (home, work, friend's house, local coffee shop, etc.).
step 2: i have disabled my own wireless encryption as well as the wireless encryption at a friends house, however, to do so i had to use their ibook, as my own either didn't list the base station in the AirPort utility (although it did list the base station in the AirPort status pull down), or it asked for a password even though the base station wasn't password protected (maybe this may add some insight into the issue?).
step 3: i have connected the computer directly to the modem using an ethernet cable and was able to go online - perhaps this means the problem is related solely to the card.
step 4: i moved the the com.apple.networkConfig.plist file and and the SystemConfiguration folder to the desktop and restarted. unfortunately, OS did NOT rebuild the files. instead, i had to go through the network diagnostics to rebuild them manually. while the files were replaced, the problem was not solved.
step 5: i reset the PRAM, but the problem still exists.
step 6: i reset the PMU, but the problem still exists.
i then tried various combinations of your suggestions, including moving the files out of the preferences folder and then reseting the PRAM and the PMU, but still nothing.
after having attempted every fix i could think of (and that was before posting to this forum) i did a full erase and install of the OS. since that's usually the cure all to whatever ails the computer, it's my assumption that the issue is a physical (hardware) one. that said, if you have any other suggestions i will be more than happy to give them a shot.
thanks again,
brad

Can't Connect to Internet using AirPort Extreme Card and DLink Router

I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

dannabee, Welcome to the discussion area!
What Mac do you have?
Do you have iMac G5 or a Power Mac G5?
Did you install the AirPort Extreme card yourself?

Airport Extreme Card wont connect to D-Link DIR-615 (wireless N router)

Similar Messages

Maybe you are looking for