Airport Extreme connects to Epson all in one printer, scanner doesn't work

I got a new Airport Extreme to connect my all-in-one printer, copier, scanner Epson CX8400. Connecting the printer feature to my MacBook Pro and my HP laptop was very easy, however can't get the scanning feature to work. Has anyone had this same issue? Do you know how to solve it other than plugging the USB cable directly to the computer? thanks!

Hi Carlos9912,
Does the Epson CX8400 support scanning over WiFi/Bonjour? I know my two HP Photosmart printers and my Epson I have do not support scanning over WiFi/Bonjour, despite the fact that they support printing functionality.
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=63069506
(Product ID page for the Epson printer)

Similar Messages

Is there an all in one printer/scanner that will work stand alone with the ipad? Thanks

I'm looking for an all in one scanner/printer that will work stand alone with the ipad,I'm scanning some family photos and no longer use a laptop,thanks for any help.

Use an AirPrint printer.
They are listed here (along with instructions for communicating with iPad):
AirPrint Basics

Connecting All-in-One printer/scanner to Airport Extreme Issue

I just bought a new Epson NX430 all in one printer/scanner. I hooked it up to the aiport extreme. Network printing and AirPrint work flawlessly.
My problem comes when I want to scan. I can't seem to figure out how to allow my desktop to accept scanned images from the Scanner.
What I think I may need to do is keep the printer attached to the airport by the usb as well as by wifi, that way i can still airprint through the airport but scan to my iMac.
Does anyone have a way for me to not have two available printers in my iMac?
Thanks.

Bonjour only allows the print function to work when a multi-function printer is connected to the USB port on the AirPorts.
The bottom line here is that if you need the advanced features like copy, scan, maintenance, etc, the printer cannot be connected to the USB port on the AirPort routers.....since only the print function is supported at the USB port.
If you need full functionality, you have 3 possible options:
Connect the printer directly to USB port on a computer
Connect the printer (if capable) using an Ethernet cable to any LAN Ethernet port on your router or AirPort
Connec the printer (if capable) using wireless

I am not able to connect with my Epson all in one printer

I am having Epson All in one printer which is being installed on my HP notebook. However, i am not able to print from this notebood as it says communication port is not available. I am able to scan, but can't able to print. My operating system is Windows 7 home edition. Please help me to resolve the issue.

What happens when you try?

Connecting HP PSC 2355 All-in-One printer/scanner using USB cord

I have a Time Capsule that I use to back up both my Mac Mini and my MacBook Pro and would like to connect my HP PSC 2355 All-in-One Printer/Scanner to the network using USB cord and plugging it into the back of my TIme Capsule. I tried this once, but was unable to find the Printer. I would like to set it up so I could use both the Printer and the Scanner from either my MacMini or my MacBook Pro. It would be really cool if I could figure out a way to use Back to My Mac to print when I am away from home and using my MacBook Pro at a WiFi Hotspot. Is this possible? How can I do it? Suggestions? Thank you!

+would it be possible to split the USB cord coming from the Printer+
I'm afraid not. The connection must be direct to either the TC or your computer, but not both at the same time.
Apple's Printer Troubleshooting Guide will guide you through the process of setting up the printer. Unfortunately, Apple does not offer a printer compatibility list, so the only way to really know if your device is compatible is to try to see if it can be configured.
Perhaps HP would could help in this regard.

All in One Printer/Scanner/Copier/Fax Recommendations

Hi,
I'm looking to purchase an all in one printer/scanner/copier/fax device. I was wondering what recommendations other people have. The main purpose would be to print photos, scan photos and some small business office printing. Note, a fax would be nice, but is not absolutely neccessary.
Scanning photos would be important, since I plan to scan our family's photo albums into iPhoto.
Also, is there a printer than can communicate with the Mini using bluetooth? If so , does it work well?
Since I have limited desk space, size would be an issue (smaller the better).
Looking to spend about $200, slightly more if the cost justifies itself. Less is always better.
Thanks in advance!

The Brother MFC-420cn
http://www.brother-usa.com/MFC/ModelDetail.aspx?ProductID=MFC420CN
does everything you ask for less than $100 -- except bluetooth.
The Pluses: Good Mac software. Cheap ink. Networkable.
The construction is flimsy plastic, but if you are gentle it will hold up.
Definitely small footprint.
Paper path is 180 degrees, which is not my preference.
Personally, I prefer Epson all-in-ones. Also good Mac software and 80 degree paper path for less jamming. Exceptional scan quality.
http://www.epson.com/cgi-bin/Store/ProductCategory.jsp?oid=-8182

Problem setting up HP 6310 all-in-one printer/scanner

I have just installed archlinux for the first time, and so far everything is working great except for a HP 6310 all-in-one printer/scanner. This printer is connected by wire to a router, and the computer communicates with the router over a wireless connection. I have managed to install the printer through cups and print a test page. The problem is getting hplip and sane set up. I belive that if I get hplip set up correctly that that will take care of the sane problem.
Trying to install the printer with hp-setup:
[mike@archy ~]$ sudo hp-setup -i 192.168.1.104
Password:
HP Linux Imaging and Printing System (ver. 3.9.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Setting up device: hp:/net/Officejet_6300_series?ip=192.168.1.104
| PRINT QUEUE SETUP |
Please enter a name for this print queue (m=use model name:'Officejet_6300'*, q=quit) ?
Using queue name: Officejet_6300
Locating PPD file... Please wait.
error: No PPD found for model officejet_6300 using new algorithm. Trying old algorithm...
Found PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Enter a location description for this printer (q=quit) ?computer room
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/net/Officejet_6300_series?ip=192.168.1.104
Queue name: Officejet_6300
PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Location: computer room
Information:
error: Printer queue setup failed. Please restart CUPS and try again.
Restarting cups doesn't change anything.
Running hp-check gives this:
[mike@archy ~]$ hp-check
HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux archy 2.6.32-ARCH #1 SMP PREEMPT Sat Jan 23 13:53:44 UTC 2010 i686 Intel(R) Pentium(R) III CPU 1133MHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.6.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.2
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/net/Officejet_6300_series?ip=192.168.1.104
[installation]
version = 3.9.12.29
date_time = 01/24/2010 15:48:05
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
Officejet_6300_series
Type: Unknown
Device URI: socket://192.168.1.104
PPD: /etc/cups/ppd/Officejet_6300_series.ppd
PPD Description: HP Officejet 6300 Series, hpcups 3.9.12
Printer status: printer Officejet_6300_series is idle. enabled since Sat 23 Jan 2010 02:26:45 PM CST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0xb1d at 004:002:
warning: Device URI: (Makeuri FAILED)
| USER GROUPS |
lp wheel network video audio optical storage scanner power users mike
| SUMMARY |
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
I have a feeling that the problem is here:
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Something about the backend isn't right, but I'm out of my depth here. Any suggestions would be appreciated.
One other point. It works with no problem in Ubuntu with both hplip and sane, so I know it is possible. I just haven't figured out the trick yet.

Well, it's fixed now, but I'm not sure why. I hooked up a HP 3970 usb scanner to my computer and when I started xsane it not only found it, but also found the 3610 all-in-one on the network. I checked hp-tools, and the 3610 was there also.So everything is working now, but I'm still curious as to why the 3610 wouldn't work with sane and hp-setup until I plugged in the 3970 to the computer.

Scan Control from HP 1210 All in one Printer/Scanner

I now have Macbook with OS 10.6.8.
Used to have 10.4.11
We have an HP 1210 All in one printer/scanner.
With 10.4 there was a very clear and user friendly utility provided by HP that enabled good scan control.
It enabled multiple choices of destination filetype and multiple pages scanned into a single document.
Now I have 10.6.
I have done S/W update both with printer connected and disconnected.
I have been offered and have downloaded the latest version of s/w from HP.
Nowhere on my Mac is there a file that has any name like HP, Hewlett Packard or PSC or 1210
The utility is there somewhere because I can print, and, if I have the printer active, I can use the utility to check ink levels etc.
However the ONLY scan facility is the Mac IMage Capture.
This only does single pages and only scans to jpeg.
What do I have to do to get my full scan control facility back and active as provided by HP
Steve B

steve.br wrote:
However I repeat, There is no s/w that the system can find that is labled HP, Hewlett or PSC or 1200. Not in applications or Utilities or anywhere I can see.
If I use the Finder File Find utility I can search for files with any of those attributes and nothing related is found.
Path should be HD/Library/Printers/hp
Within the hp folder are several folders with one titled "Utilities" and within that folder is the application HP Utility
Path HD/Library/Printers/hp/Utilites/HP Utility
Since it's to be accessed from the System Preferences Print & Fax tab/pane/icon or within Image Capture, that is why those files are not in the Applications folder nor Utilities folder. It is not to be launched directly, i.e., double clicked. Be careful accessing files in the main Library folder (i.e., HD/Library/).
FYI: I have all those folders on all my computers each using a different OS even though the only HP printer I use is a 1995 Laserjet 4MV.
I Have just done a test using the SystemPreferences Printer area and get sent to the Image capture function.
So, that was after clicking the Scan tab in System Preferences > Print & Fax? It's most likely using the HP Software that you noted downloading in your original post. It is not using some phantom software.
I want to be able to save a multiple page document file in .pdf format.
I use Acrobat Professional to scan as PDF with a Brother multifuction device that is equiped with a 30 page auto document feeder (ADF). Since the HP 1210 is a flat-bed scanner, it seems that your wish can be achieved by scanning and saving each page as separate documents and then combining those documents. I cannot remember whether Apple Preview in 10.6.x offers combining PDFs but there are a number of freeware and shareware apps that can.
Is there a conversion capability that would convert from .jpeg to .pdf
Apple Preview, Adobe Photoshop, GraphicConverter are just a few apps that come to mine.
Thanks for your help.
You're welcome. A lot has changed since Mac OS 10.4.11. Hope the above helps too.

HP Potosmart c6380 All in One printer -scanner - copier

Hi just been give a HP Potosmart C6380 All in One Printer - Scanner - Copier , i have no information pack with it. How can i get hold of one to able to connect the printer at home.

Hello lou, What is the operating system on the computer you want to install the printer on? Depending on the OS, you would download the Full Featured Software for that OS.Then making sure you have your USB cord ready to connect the two together, install the software and follow the instructions as it installs. Connect the USB cord when it tells you to. Here is the support page for that printer. It gives the download options and manuals you would want.HP Photosmart C6380 All-in-One Printer Manuals | HP® Support IF you need further help, let me know.Thanks.

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

Airport Express and HP F4180 All in One Printer

Hi
I just bought an Apple Airport Express to connect my F4180 to my wireless home network. This F4180 used to be connected directly via USB to my Vista PC and was available to the other laptops by sharing the printer. This worked ok, but I always had to start this specific computer to make the F4180 available for the other laptops.
After installing the Airport Express and Bonjour everything seemed perfect, but after the first print I noticed that only 60% of the page was printed and an error occured. I tried everything, installing, reinstalling, deleting, reading forums, helpdesks, etc, etc, but did not find an answer.
Does anyone have a clue?
Thanx in advance
Henri
Vista,
HP F4180 All in One printer,
Apple Airport Express (latest version),
Apple Bonjour (latest version),
Linksys E200 wireless
Apple Airport Express installed as extension of existing network

This combination SHOULD work but it often does not. I have replaced several base routers from non-Airport to Airport and resolved issues like this - USB printers, AirPlay issues, etc. Its the only way I know how to make it work, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to connect my hp all in one printer to a new wifi hub?

i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all of which are windows 8! i have 2 questions firstly the most important being - can you setup a hp all in one printer onto a windows 8 laptop? and secondly how do we connect our printer to a new wifi hub?
if it is possible to setup the printer onto a windows 8 pc how do we do it?
thanks, lucy

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns.
If wireless, status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Airport Extreme connects to Epson all in one printer, scanner doesn't work

Similar Messages

Maybe you are looking for