Airport Extreme denying connections to Win XP laptop and Blackberry devices

I have a Macbook with OS 10.6.4 and have used Airport Utility 5.5.1 to set up my Airport Extreme n. I can use my Macbook and a Ipod Touch to connect to the WiFi network setup using the Airport Extreme. However other devices like a Win Laptop, Blackberry and Wireless Bridge are not able to connect. I get a 'Connection Denied' or "IP address not assigned' message. The devices can see the network but connections are not made. Any suggestions?
smitra

Thanks for your reply. Unbelievably frustrating: I just booted up the laptop having shut it down Friday, and it connected and negotiated an IP address very quickly after I entered in the password.
I had already tried rebooting it before I posted this question last week, so I'm miffed that I have no answer as to why that was happening Thursday after a reboot but not today.
(BTW, the issue with the shorter password is for usability with guests. In today's world, many people come to my home carrying an iPhone or iPod Touch, and it is hospitable for me to get them on the network. It isn't about re-keying it in on my iPhone, it is about keying it in on other people's iPhones.)
(Also, for the neighborhood I live in, the mixture of letters, numbers and symbols in my 8 digit password is probably just fine.)

Similar Messages

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Airport Extreme Desktop connected wirelessly but laptop not working

I have an iMac working just fine connected to the internet via my Airport Extreme. We also have 2 laptops and 2 iphones in our home and none of them are able to connect to the internet. I am sensing this is an airport issue. I've already explored all modem issues. Everything is working fine there. I am getting wireless as my iMac is able to connect, however no laptops are able to.
We've rebooted, reset and emptied all cache's etc.
Am I correct to think my extreme may be the issue? If so, is it time to replace it?
Thanks in advance for your thoughts.

Joe and Hackintosh,
Thank you both for your replies. What I figured out is the router was going on my airport extreme. It was 7 years old so I guess it's time for them to say good bye.
Thanks again!

Sent wake-on-lan command will reset airport extreme internet connection?

hi,
I have a problem with my airport extreme.
1, My airport extreme is set always stay connected to internet. If I reboot my airport extreme, it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
2, if I sent a wol command to my NAS, airport extreme internet connection will be reset. it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
zhi

Derek-
Since I could not find an answer on the support site. I contacted Apple Support. Once I explained the symptoms the tech seemed to know exactly how to address my issue. I will explain what happened in hopes that it will assist you. It seems that the issue has to do with the type of wireless network security set up in the Airport Extreme that conflicted with the Vista notebook's wireless adapter.
The tech had me launch Airport Utility, log into the Airport and Click on the Wireless. First he had me change the Radio Channel Selection from Automatic to Manual and changed the 2.4 GHz channel to 9 (from default 11) and the 5 Ghz channel to 157. The wireless security was set to WPA/WPA2 and he had me change it to WEP (Transitional Security Network) and I entered a 13 character key.
This resolved the internet connection issue with the Vista laptop immediately, but now I cannot print to my wireless Lexmark printer. I have a support email to Lexmark. It seems that the Lexmark driver/software only lists WPA in the install dialog and does not include WEP. My guess is that this is the source of the problem.
I hope this helps.
-Eye

Airport extreme: my macbook, cannon wireless printer, ipad and iphone cannot connect to internet when Apple Tv and/or PS3 is connected

Please help! I have an Airport Extreme (model A1143) as my router, and I have several devices connected to it wirelessly and wired. I have my Macbook, Macbook Pro, iPad 1, iPhone 4S, HTC Thunderbolt, Cannon wireless printer, and Apple TV (gen 1) connected wirelessly. I have my PS3, an external hard drive and DirecTV connected via ethernet cable (but sometimes my PS3 is also connected wirelessly).
I began to notice a few months back that my wireless printer had connection errors and could not print. And I noticed soon after that, from time to time, the internet connection on my Macbook and iPad was extremely slow, to the point that I could not surf the web. I tried several different printers before realizing that this problem was happening only when I had my PS3 turned on. I tried both PS3 wirelessly and wired, but the problem persisted. I figured it was a problem with the PS3, so I just made sure that PS3 is off when I need to use the wireless in the house. But I recently bought an ATV (gen 1) and also noticed the same problem when it was connected to the Airport Extreme (wirelessly) - i.e., Ican't print, and my internet is super super slow on macbook, ipad, etc.
So, it must be that my Airport Extreme is the problem, not the PS3 or the ATV. Is there anything I can do to fix this (i.e., some setting that has to be changed)? Or do you think that my Extreme is just dying out on me and it's time for a replacement (I bought it about 5 years ago)?

This problem, for reasons unknown to me, has resolved itself on its own. After several attempts finally everything decided to work. How does stuff like this happen? Thank you.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

Airport Extreme wont connect too my router

Airport extreme dosent connect to my router via my ethernet cable, i just get a orange flashing light. Do i need to configure my router?

The ulitity program need to be updated after downloading its all sweet now. I just have too FAT 32 my External HDD and it will be fully operational

Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected?

Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected? I'm told that it's better to only use the WiFi capabilities of the Extreme and leave the Bigpond to feed to the extreme.

No, bridge mode would not be the correct setting for this.
Instead, look for a "wireless settings" tab or page that will provide the option to turn off or disable the wireless radio of the BigPond router.
If you are still having difficulty, it would be a good idea to post your question on a BigPond support forum or contact your Internet Service Provider.
Contact Technical Support - BigPond

AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
What am I missing here?

Hi Pete Mackie-
Nope. You aren't missing anything.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
Luck-
-DaddyPaycheck

Devices not connecting through Airport extreme wired connection

Hi
I just got an Airport extreme to use as an extention of my existing network, and to plug some devices in so that they can connect to the internet for updates (Sony Blu-ray player, dish network receiver, slingbox)...
my wireless is from a linksys/cisco wireless router (4-port) wrt310n, that is connected to my cable modem. The airport is set and has the green light showing. The blu-ray player and dishnetwork receiver are plugged into two of the ports. The blu-ray player says it can't connect to the internet. The dish network receiver says it is connected, giving ip address/submask, etc.
If I take my macbook pro and turn off wireless and plug into the airport it will not connect to the internet.
What have I not done to allow wired connection to the airport extreme to connect to the net?
thanks
David

Thanks for the clarification of your setup.
Unfortunately, the bottom line here is that this is not going to work.
The ethernet ports on the Extreme will only be active if you configure the AirPort Extreme to "extend a wireless network". But, it can only "extend" a wireless network from another Apple router. It's not compatible for this purpose with your Cisco router or any other manufacturer's router.
If you are unable to connect the AirPort Extreme to your router using an ethernet cable, you might want to take a look at a pair of ethernet powerline adapters to accomplish the same task by using the wiring in your home to transmit the ethernet signal.
I should clarify that if you connect the Cisco and AirPort Extreme using ethernet, you would not use the "extend" setting on the AirPort Extreme. This is only used if the device is connecting to another Apple router.
Message was edited by: Bob Timmons

ALWAYS have to reset my airport extreme to connect PS3?

Whenever I want to watch NetFlix or other streaming service on my PS3 I always have to reset my Airport Extreme. Same with the MacBook and iPod in the house. iPad and S4's connect flawlessly. Why is that? Makes me not want to watch a movie because have to do silly stuff like that.
Thanks,
Ron

Hello there ronald,
It sounds like your Airport Extreme is not consistently working correctly for all your devices. I would start by performing a soft reset, then testing the issue again:
Resetting an AirPort base station FAQ
Soft reset
Open AirPort Utility in Applications > Utilities.
Select AirPort Utility > Check for Updates...
Install the most recent firmware and version of AirPort Utility available for your Mac.
Connect the base station to power.
Push and hold the reset button with a pen, pencil, or straightened paperclip for ten seconds.
Release the button. The base station will soft reset.
If that does not resolve the issue I would next perform a factory reset on the device, and test it again.
Factory default reset
Disconnect the base station from its power source.
Press and hold the reset button with a pen, pencil, or straightened paperclip, then plug the base station back in while continuing to hold the button for approximately 5 seconds until you see the three status lights glow.
Release the button. The base station will factory default reset.
Thank you for using Apple Support Communities.
All the best,
Sterling

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

Diane,
I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
*+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

My airport extreme isnt connecting, i done all i could. its a windows new version

i recenlty moved and have to set up my airport extreme. I done all i could and still no succes.

Sorry but other than telling us you cannot get it to work.. you provided nothing.. no info whatsoever.
Not even what you have tried to fix it..
So.. plug the Extreme into a computer by ethernet.. no other connection.. reset it to factory and redo the setup.
Plug the Extreme then back into the modem by ethernet.. if the modem is a router then the TC is in bridge mode.. if the modem is pure modem then the TC has to be router mode.
Do not setup by wireless.. it is near impossible.
Once you have it all plugged back together if it doesn't work.. turn off everything. Then start again in correct order.. modem.. AEBS.. clients. If you have cable internet the modem may need to be off for 15min or more to reset.
If you have trouble still.
Modem.. type model brand. Type of internet, ISP ????????
AEBS, how old, what firmware. what setup ?????????
Computer, what OS, what airport utility, using wireless or ethernet ????????

Airport Extreme denying connections to Win XP laptop and Blackberry devices

Similar Messages

Maybe you are looking for