Airport Extreme doesn't see ethernet ADSL router

I'm having a problem trying to connect my new Airport Extreme base station to a one port ethernet conexant adsl router. It simply doesn't see that the router exists.
The way I have it setup at the moment is the router distributes an IP address to the airport and the airport distrubutes IP addresses to wireless devices. At least that's what's supposed to happen.
I have an Airport Express connected to the router and that works fine. Connects no problem on its default settings. The Airport Extreme however doesn't connect with its default settings.
Anyone have any suggestions as to how to fix this problem? Is it possible the Airport Extreme just doesn't work? I've connected the Airport Extreme to my laptop via the WAN port to set it up and that worked Ok so as far as I can tell the WAN port works fine as does connecting wirelessly. The two just don't talk to each other.

Try the following ...
Modem/Router Power Recycling - Quick
o Power-off the ADSL modem, AEBSn, & computer(s); Wait at least 5 minutes.
o Power-on the ADSL modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the ADSL modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the ADSL modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)

Similar Messages

Airport extreme doesn't see my hard drive (free agent 500Gb)

airport extreme doesn't see my hard drive (free agent 500Gb)

A few things to check are:
Make sure that the drive is formatted in Mac OS Extended (Journaled) or FAT32. The normal Windows format of NTFS will not work.
The USB port at the AirPort Exteme is under powered. You almost always need to use a powered USB hub with a drive at this port, even if the drive has its own power supply.

Airport Extreme doesn't see cable modem

A new Airport Extreme refuses to see an Optimum Online cable modem. As for troubleshooting, I've seen the new AE working at an Apple authorized store, bought a brand new ethernet cable, but still only get a blinking yellow light. I can plug my G5 directly into the modem with no problems. Any thoughts?

I had a similar problem once. Turned out Verizon (the ISP) had their DHCP server bind to the MAC address of the first machine connected to it and wouldn't issue a new IP address to another machine (MAC) address, unless you either:
1) let it time out like 45 mins!
2) you spoofed the MAC address of the old device on the new device. (Can't do this on the AEBS, unfortunately.)
3) you connected the old machine and (rather than just disconnect it after it got an address from the DHCP server), you actively released the DHCP address.
Until I found out this vital DHCP server behavior info (after waiting an hour on hold with tech support and then working through level 1 support's noob scripts), I too was playing around with resetting the modem, etc., etc. The problem however was the ISP's DHCP server 'security'.

My AirPort Extreme can not see my SMC router

I have a new MacBook Pro. It can see other routers (in my neighborhood) and connect to the internet by ethernet cable into my SMC router but it can not see the SMC router wirlessly. I have no security on my router right now. Any ideas?

I have the exact same problem: SMC Barricade G 2408WBRP-G-CA with v2.08 firmware. Because there's lots of talk of problems with WEP, turned that off, but no luck, the built-in airport card of the powerbook won't connect to the router.
I have successfully connected to a Cisco access point at work with 128-bit WEP with no problem at all, so I'm certain the hardware in the machine is functioning... just not with this access point.
This is a brand new 17" Core 2 Duo Macbook Pro that I just received... all available software updates applied.
Macbook Pro Core 2 Duo 17" Mac OS X (10.4.8)

Airport Extreme doesn't see my USB disk

Hello,
i have changed the usb disk (full) that i connected to my airport extreme. I replace it by a new one (MEM UP, 2 To), formatted in mac os extended.
This new disk is mounted by the Mac but when i connected it on the Airport, the Airport doesn't see it : "no disk detected".
There isn't hub, it is connected directly.
Have you got an idea ?
Thanks,
Rudy

The USB port on the AirPort Extreme is under powered....and your new hard drive may require a bit more current than the old one.
It is always a good idea to use a powered USB hub with the AirPort Extreme whenever you are using a hard drive....even if the hard drive has its own power supply.
A powered USB hub may not solve your issue, but there is also a chance that it will. Might be worth a try.

Airport Extreme doesn't see wireless router

I set up a wireless router for my G5 iMac and have turned airport on. the default SSID is belkin54g which my PC laptop sees and connects to just fine. The strange thing is, on the iMac, it showed up in the list of available networks. At first I got all bars, then it quickly dropped to one and then it completely dropped connection with the router when it was sitting on the same desk. If I create a computer to computer network I get all bars filled but it doesn't connect to the internet. Seems like I'm missing a setting on the iMac since the PC has no trouble. The model is a Belkin 54g 4 port wireless router.
BTW: This is on 10.4.2 and the latest airport update.
Any help would be great!!!

To My knowledge, The airport utility only sees Apple airports. So seeing your 2wire via that app I do not believe works. The program I like is iStumbler. I see all kinds of things in my neighborhood.
Anyway, I claim Chipset conflict. Back what may be the security down. OR turn it off and work your way up to find what level is needed. After no security, try not broadcasting SSID, after that tweak it until you don't see it and then back off to the one that works. Every one says wireless is wireless. Even in my work place, we cannot get PC's and Mac at the same level on of security on the same access points.
Bottom line, start fresh, tweak till it works. Because at the apple store, the chipsets are the same, or meant to work well. Why you may ask.... They want you to buy and Apple extreme with all the features.

Airport Extreme doesn't recognize USB Drive

I have a USB external drive that is working fine when attached to my iMac but my airport extreme doesn't see it at all. I have tried resetting the power to both devices.
AEBS version 7.2.1
Does the drive have to be formated a certain way for it to work? Right now it is "Mac OS Extended" I have also had it formatted as OS Extended (Journaled). Neither are working.
Message was edited by: illy5603
Message was edited by: illy5603

Oh well... No dice huh? I just noticed that the Airport Extreme locks up every time I use my sonicwall global VPN client as well per this thread.
http://discussions.apple.com/thread.jspa?messageID=5347398
Looks like will have to return this and try the linksys offering.

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Airport Utility doesn't see functioning Airport Extreme Base Station

I have an Extreme (n) Base Station which serves as a WDS main with one relay Express and one remote Express. All three are functioning properly. Now I want to add a second remote Express paired with the main Extreme. However, Airport Utility doesn't see the Extreme, even when hardwired. So I have no way to add in the Apple ID of the new remote.
Any suggestions on how to resolve this? Is it necessary to restore default settings on the Extreme and reconfigure EVERYTHING?
Thanks.

Not yet. Hoping there is some other approach, since if I reset it and then it loses the connection before configuration is complete, I lose the functions that are working now.

Airport Extreme doesn't wirelessly connect to internet unless a wired connection exists

I have a 5-6 year old Airport Extreme that has started acting up. I have 5-6 devices (ipods/ipad/imac/windows pc) that normally don't have a problem connecting to the extreme wirelessly & have an xbox 360 connected via cable. Just recently I've found that none of my wireless devices can connect to the internet without the xbox 360 being turned on & signed into the internet ... the xbox doesn't seem to have any connection issues at all through the cabled connection. I hadn't updated the firmware or made changes to my network before this started, I just applied the latest firmware update to the extreme but it didn't solve anything. I've searched for solutions elsewhere but really couldn't find any solutions.
Any hints or is it time to retire this admittedly aged router?

If you have the HP 2605dn printer attached to the 802.11n AirPort Extreme Base Station (AEBSn) (or any router) by Ethernet, then the AEBSn is NOT performing as a Print Server. Instead, the printer itself would have to be configured to provide this service.
I don't have this particular printer, but I do have a network-ready HP Officejet model that I have my network clients (Macs, PCs, & even Linux) connect to. The key is either using the unit's interfact panel to configure the appropriate network settings specific for your network.

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

Airport Extreme Doesn't Connect to Internet

I've been trying, for a couple days - to figure out the AE. I want to replace my Verizon-provided router, with the AE - because for whatever reason - since adding the Verizon router, my Apple TV's don't see my PC (and my PC is the home to my iTunes library).
I've got a solid green light on the front of the AE. I've got solid green lights on the back for: Wan Ethernet connection and 2 PC Ethernet Connections. My AirPort Utility App on my iPhone shows "green" for the base station but "amber" for the internet. My Apple TV's and iPhones also all show up on the AE.
Should I manually reset the AE here?
Also - even though I have FiOS - I don't have FiOS TV, and the folks at FiOS said there are no unique "gotchas" in switching routers. And although I haven't tried it - I don't want to set the AE up as a bridge to the Verizon - I want to use the AE and only the AE.
After hours of trying (multiple times) I always reconnect th FiOS router and everything comes up flashing green with good connectivity.
Any ideas on the way forward?
Thanks much!
-Coach B.

If you have the HP 2605dn printer attached to the 802.11n AirPort Extreme Base Station (AEBSn) (or any router) by Ethernet, then the AEBSn is NOT performing as a Print Server. Instead, the printer itself would have to be configured to provide this service.
I don't have this particular printer, but I do have a network-ready HP Officejet model that I have my network clients (Macs, PCs, & even Linux) connect to. The key is either using the unit's interfact panel to configure the appropriate network settings specific for your network.

Wifi signal from Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? Airport Extreme version 7.6.1

The wifi signal from my Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? I have an Airport Extreme running version 7.6.1.

You will need to add another device like an AirPort Extreme to provide additional wireless coverage in the house.
The only way to preserve bandwidth on a network would be to connect the two AirPort Extremes using an Ethernet cable connection.
While you can "extend" using wireless only, typically half of the bandwidth on the network is sacrificed when you do this.

Airport Extreme doesn't cover (large) house. Is it possible to configure a "repeater" of some type?

Airport Extreme doesn't cover all of my (large) house. Is it possible to configure some sort of repeater?

Ideally, you would locate another AirPort Extreme, or possibly an AirPort Express in the central portion of the area that needs more wireless coverage and then connect back to your "main" AirPort Extreme using a wired Ethernet connection.
This type of setup provides the best performance for the network while allowing you to place the extending device exactly where it is needed.
Alternately, you may be able to locate another AirPort Extreme or AirPort Express at an approximate mid-point between your "main" AirPort Extreme and the area that needs more coverage and connect the remote device using wireless only to "extend a wireless network".
As you might imagine, the "extending" device can only extend or repeat the quality of signal that it receives, so establishing a line-of-sight relationship between the main and extending device would be ideal. Otherwise, you may be able to get away with a wall or two or a ceiling in the signal path, but this is always somewhat an "iffy" proposition because it is just not possible to accurately predict wireless performance in advance.

How do I use a 2nd Airport Extreme plugged into an Ethernet Wall Plug to join an existing wireless network to give me a better signal upstairs?

I have a 5th generation Airport Extreme giving me a great wireless signal on the 1st floor of my house. However the signal upstairs is weak. So I purchased another 5th generation Airport Extreme that I would like to plug into an ethernet wall plug upstairs. I would then like to have the upstairs Airport Extreme join the same network thus giving me a good wirelss signal upstairs. I have a MacBook Pro running OS 10.7.4. Can somebody give me step-by-step directions to set up the upstairs Airport Extreme?

I assume that the new AirPort Extreme is still in its original factory default settings.
Before you connect the AirPort Extreme, please connect a laptop to the Ethernet cable that will be used for the connection and turn off the wireless on the laptop. Make sure that you can can connect to the Internet before you begin to configure the AirPort Extreme.
Disconnect the Ethernet cable from the laptop and connect it to the WAN "O" port on the upstairs AirPort Extreme and power it up.
Open Macintosh HD > Applications > Utilities > AirPort Utility 6.1
Look in the upper left hand corner of the screen for a tab or box that reads "Other AirPort Base Stations (1)"
Click on that box,then click on the name AirPort Extreme xxxxxx
Wait a moment while AirPort Utility analyzes the network and then displays a message that the AirPort Extreme will be configured to extend your existing wireless network.
Enter a Base Station (device) name for the AirPort Extreme (and a device password if prompted), then click Next.
Wait another minute or two until AirPort Utility notifies you that the AirPort Extreme has been Set Up.
That's it.

Airport Extreme doesn't see ethernet ADSL router

Similar Messages

Maybe you are looking for