Airport Extreme dont have password even though i installed it with password
I installed my Apple Airport Extreme 802.11n to be passweord protected, and i also give the network a name, even though, it has no password and the name is standard (Apple Network ae5ee8). Also the Airport Extreme flashes amber (meaning it cant establish network conection), but the network works fine... I try to configurate it, but i get the message "can not connect because of an error, Error -4"
Thanks for all help!
Hi, thanks!
It dont work though, should i let airport be switched on or should i turn it of? If i turn it of i dont see my Extreme at all, and when i lett it be switched on and connectet to the extreme via the airport as well i get the same error as earlier. This means i cant go to the manual configuration and see what the reason of the orange light is....
Similar Messages
-
I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.
Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
Since upgrading to osx 10.8.2 sleep requires password even though i have set to open automatically.
Since upgrading to osx 10.8.2 on my mid 2009 Mac Book Pro 15 inch, It requires me to enter my password even though automatic login is turned off. It never required this before. Why is it doing this now since the upgrade?
Try reinstall iPhoto:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
If that fails then I think you need to reinstall the OS. -
Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.
Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
Do you have any other suggestions?
Thank you! -
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
my ipod tells me my apple id password is wrong even though I just changed the password. I can log on via my desktop, but the ipod continues to tell me that the password is incorrect, so I can't update any apps. when I continue to to try to enter the correct password in it finally freezes the account, and I have to go online via my desktop to fix that problem. I have two apple id's because when my ipod crashed I had to reset it completely. I have never had any problems with this before, and it has been a year since I got my second id, which is linked to the ipod. My first id is used for the cloud on the same device. My wife suggested I reset documentson the cloud for the second id, however, when I try to log on the cloud with my current id, it tells me I have to set up the cloud on that device, but it is already done, but with the old id.
confusing I know. I have been on the 'change your password merry-go-round' all day, and I'm getting dizzy! Help!Then contact iTunes:
Apple - Support - iTunes - Contact Us -
I have an iMac, operating system 10.7.4 with up to date software. My mail application is rejecting my password even though I know I am putting it in correctly. I have an ipad and iphone and the mail application is working fine on them. On my desktop however I cannot receive or send mail. I think it must be something to do with the settings but cannot work out what. I have contacted BT who provides my email and internet. As I have another email address with them that is working correctly they believe it is a problem with mail rather than with them. Please can you help?
OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
After updating my iPad to IOS 8.1.2, I am unable to access the Cloud with my password, even though it worked on my Macmini. I changed the password and it still does not work on the iPad. What can I do to get iPad to recognize my Apple ID/password account?
I would be helpful to know what those "basic steps" you have already tried are, but lacking that information:
Settings app > iTunes & App Stores - sign out of your AppleID
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Sign back into your AppleID (same location as noted above) -
MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??
kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007 -
Example is facebook as soon as I get to the log in page it fills in my password even though I have never asked it to remember my password. I am afraid to do other sites on my mac because others use it and i don't want them accessing my bank accounts. How do i make sure that it won't?
Some sites use cookies to remember login details. Delete the cookies for the site, and when you next log in check for a setting similar to "Remember me" or "Always keep me logged in" and make sure that it is not selected. For details on deleting cookies see https://support.mozilla.com/kb/Deleting+cookies
-
itunes will not recognise my encryption password even though it has been reset. cant restore to last backup?
I'm not aware of a way to reset the password for an encrypted backup. If you have forgotten the password for an encrypted backup, your only alternative is to put the phone in recovery mode and restore it as a new device. Your data will be lost.
-
Not remembering passwords even though "remember my passwords" is checked in security
I recently updated to Firefox 4.0. After that, websites are not remembering my username and password even though, "Remember my site passwords" is checked in Security.
Looking for resolve.cor-el -
I mean that if I go to a site and enter a username and password, I am not prompted to remember the information and if I am, when I close Firefox and reopen and go back to the site, the information is blank, nor does it appear if I start to type the first few characters.
If I go into the password manager to look for sites that should have password information there is nothing in the box.
I am going to try to be specific regarding my settings, please keep in mind that this is how they have been set since I started using Firefox and up until I upgraded to 4.0 I had not problem.
*In Privacy the settings that I have always had checked are:
Remember download history
Remember search and form history
Accept cookies from sites
Accept third-party cookies
Keep until: I close Firefox
Clear history when Firefox closes
*In Security settings that I have always had checked under Passwords are:
Remember passwords for sites
Also, when I select under View -> Toolbar: Menu Bar and/or Bookmarks Toolbar once I close out of Firefox and then reopen it, they are no longer visible.
The option for Permanent Private Browsing is not checked.
Look forward to any further information anyone can offer. -
When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.
Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM -
My Airport Extreme Stops working every evening...
Funny! My Airport Extreme stops working every evening at about the same time for 4-5 hours. I am assuming that there is some sort of "usage setting" that needs to be set. Unfortunately I cannot find that setting. Any help appreciated.
A windows 7 laptop is also not seeing the airport extreme wifi signal. So I have a Mac Book Air, iPad & wired devices connected fine. I have an iPhone 3Gs, an iPhone 4 and a windows 7 PC all failing to connect. They all connect fine to other wifi devices. They all connected fine to the Airport extreme until the recent problems started. I don't think it's an iPhone issue, therefore - more likely to be an issue with the Airport extreme?
-
My iPad has been hacked I cannot get into hotmail through mail also I get the apple message ,incorrect password even though this is correct what can I do
From your description it sounds like your Hotmail account was compromised. Does anyone else know the password and could they have changed it?
Maybe you are looking for
-
Deletion of Purchase Order from Version
Hi, I want to delete a resource at a factory. I have deleted all planning data related to this resource from live version 000 and Copied version. When I try to delele resource from the model it gives a message " Res. F313_HAND_RESO, plng ver. ALT_TES
-
Z1 compact wont turn on, three vibrations, flashing red light
phone wont turn on, tried the red button off button, tried the power and volume button, when in charge it keeps vibrating 3 times and flashing a red light, what can I do?
-
Problem with AS3LIB Sample program
I have successfully compiled and generated swf file for StringEcho example under Windows but I cannot seem to get the AS3Lib sample to compile properly. I tried to execute the makefile but it failed where .SUFFIXES and .c.o were not recognized as co
-
Please help me.. I do not know what is the problem...
Hi... I am new in ODI and this is my first time.. huh.. its quite pressure.. I have created about 50 scenarios and all the scenarios will be checked any files in queue table to process for every 60 seconds. My problem are:- When i start about 10 scen
-
Conversion of divx format videos to ipod compatible format
hi, the videos ive converted have got no sound. they r in divx format. can u tell me the way to convert em into ipod compatible format. is there a free software to do it. chintoo