Airport Extreme exposed to the Elements

Can I put an airport extreme in a un air-conditioned pool house and use that airport to extend the network from my airport in the house? Keep in mind that it can get pretty warm here in kentucky and its been hot in that pool house before... Will the airport extreme work just fine under these certain conditions? Thanks in advance/

I'm not sure what the operating temperatures are (you could probably find the owner's manual on the site and look that info up for yourself), but I've got to imagine that eventually the heat would get to it and it would fail.
High temps and lack of ventilation are both enemies of electronics, no matter who the manufacturer is.
If the unit won't be installed in a place that gets direct sunlight, or is within a foot or two of the roof (where heat could radiate downward), then things might not be so bad. While I've experienced a few toasty summers in Kentucky myself, the good news is there are plenty of places that see worse. And it cools down pretty nicely at night (unlike someplace like Arizona where night-time temps can still be in the upper 80's).
I recommend checking the specs to see the operating temperature. Then look at your potential installation area again and figure out whether you think it would be worth the gamble. Good luck!

Similar Messages

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized. I have been on the computer and gone to airport utility and it is simply not showing up at all. What can I do?

I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?

Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
and plays properly.
Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
Thanks again.
JP

I have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purch

i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?

the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled.......

Can you have two airport extreme connected in the same network?

You can have two airport extreme connected at the same time in a network?
like if you have a modem, you can connect two airport extreme in that modem?

You can have two airport extreme connected at the same time in a network?
Yes
like if you have a modem, you can connect two airport extreme in that modem?
Airport Extreme
You should plan to connect one AirPort Extreme to the modem and the second AirPort Extreme to the first. The first Extreme will connect to the modem using an Ethernet cable. The second Extreme can connect to the first also using an Ethernet cable, or it can connect using wireless only.

Is the current version of AirPort Extreme better that the version I purchased two years ago?

Does the current Airport Extreme have better
range than the one I purchased 2 years ago?

Not in regards to range.
If you have a new Mac purchased in the last year or two, you may get a bit faster connection on the 5 GHz band if the computer is in close proximity to the router.
If you need more range, you will do better by adding an AirPort Express or another AirPort Extreme to "extend" the wireless signal of your current AirPort.

The airport utility software running on Windows7 is not able to find my airport extreme. Bute the wireless connection is working.

I have a stable wireless connection between my Laptop with Windows 7 and the airport extreme. But the airport utility software cannot find the air port extreme. The problem now is that I cannot install my printer which is connected via USB to the airport extreme. Can somebody help? thx

Try this Web page. These steps helped me. Hopefully this link works for you.
http://books.google.com/books?id=-yhGNt6fqkIC&pg=PT301&lpg=PT301&dq=%22For+Print er+Name+or+IP+Address+you+have+two+choices,+depending+on+whether+the+Windows+mac hine+is+connected+via+Wi-Fi+or+Ethernet+%22&source=bl&ots=q7h6Uvih-B&sig=XJOXFo9 yZmhRW6PPDafOKc4QywQ&hl=en&ei=C3DKTqOqE4S3twf7wJjNCw&sa=X&oi=book_result&ct=resu lt&resnum=1&ved=0CBwQ6AEwAA#v=onepage&q=%22For%20Printer%20Name%20or%20IP%20Addr ess%20you%20have%20two%20choices%2C%20depending%20on%20whether%20the%20Windows%2 0machine%20is%20connected%20via%20Wi-Fi%20or%20Ethernet%20%22&f=false

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Just purchased an Airport Extreme , what´s the difference between LAN and WAN

just purchased an Airport Extreme , what´s the difference between LAN and WAN

Check the Setup Guide for the AirPort Extreme to confirm that the WAN port accepts the signal from your modem or from another router on your network.
Other Ethernet devices on your network connect to the LAN <-> ports.

Does anyone repair Airport Extremes? Save the landfills!

The ethernet WAN port of my Airport Extreme 802.11n stopped working, and the unit is out of warranty and not covered by AppleCare. I really don't want to just toss it to the landfill, but Apple only offers a refurb-replacement option ($130, with 90 day warranty, so $50 more and I can get a new one with one year, or somewhat less through a company discount).
Anyone know of a place that works on these?

Since I have to use WEP (not really secure) on my network in order to allow some older devices to connect, I have also enabled MAC Address Access Control (also not secure) to at least be able to prove that any unauthorized access is not accidental.
The predecessor to Airport Utility allowed me to save the MAC address list to a file also, but that seems to be a missing feature now. I rummaged in the saved .baseconfig file and saw no hint that the access control list is in there. There isn't even a binary element that's big enough to be hiding it.
Do I have to copy down the MAC ACL manually? And re-enter it manually to restore it?

How do i use airport extreme to extend the range of my imac

I have an 2012 Imac and I would like to plug the Internet to my imac and use the the imac wireless and use my airport express to extend the range of the imac wireless signal. I am having an awfully hard time figuring this out - can anyone pass along a link to a document or any suggestions?
Thanks!

Apple's instructions for this are here:
http://support.apple.com/kb/HT4259
Although two AirPort Extremes are pictured in the example, the setup for a Time Capsule and AirPort Express would be exactly the same.
In general, a good starting location for the AirPort Express would be a point that is approximately half the distance from the Time Capsule and the area that needs more wireless coverage. You may need to experiment with the location of the Express a bit depending on the number of obstructions like walls and/or ceilings in the signal path

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Airport Extreme exposed to the Elements

Similar Messages

Maybe you are looking for