AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck
i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions
What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Similar Messages
-
my start up disc is full i have a macbook air, i back everuthing up with time capsule and have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
My daughter created a movie using iMovie 11, which she has worked on for a month. When trying to save it on a jump drive she was asked to "finalize" the movie, and while this was running (quoted 13 hours!) she received an error message. Now there is no record of it at all, I have looked in trash etc. Any ideas how I could try and retrieve the file?
The file cannot be reloaded in iMovie using File > Open Recent ??
There is no trace of the file in a Spotlight search?
The project files are not under <user>/Movies/iMovie Projects ??
Finalizing creates small, medium and large version of the finished video. It does take a long time, but it should not destroy your project files.
Oh, and you really MUST have a backup of your files. You can expect to lose files if you have no other copies of them. -
I was being able to watch facebook videos from my ipad, and since i updated my IOS to 7.1.1,i dont know if it has to do with that but now i can no longer see any facebook videos
If you look at the preferences for Flashblock (access from the extensions window of the add-ons manager) and choose Whitelist, you can add a site to that window, and that site will not be blocked by Flashblock at all. You will not even see the Flashblock icon.
-
I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.
This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.
-
HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.
-
I live in the US but am in Paris for three months. I can't access itunes. I tried reinstalling but got this error: Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I followed the Apple troubleshooting advice--delete temp files, uninstall itunes, shut down computer, restart, reinstall. What's the problem and, especially, what's the fix? Walter Cohen
I, too am having the same issues as above like the many others. For days i have been trying to uninstall reinstall as per troubleshooting but to no avail.Apple, you need to fix this!
-
I am unable to power off my iphone 4S. I have restored to factory settings and restored a back-up. Please help?
How are you trying to power it off?
And does a physical reset work? -
The ipad originally lost half of the display on the screen and now won't display at all, other than a slight flicker when you first try to turn on. I have been able to back up the contents and have restored to factory settings. The battery is fully charged. There is about 20gb of memory space available. Please can anyone help in diagnosing the problem?
The screen has probalby died. Or the backlight.
You can look into getting it fixed but you may be at the point of comparing investing to fix an older device or putting that money towards something newer that will have a longer life. -
I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message. Any help out there?
people repport dirt in the connector can cause this
guess a broken connector could too -
The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
tried to update my i phone 4s, now the phone isnt going on unless i restore to factory settings. The screen is just showing a usb and arrow to I Tunes, it also says if i restore i will lose all media, which hasnt been backed up recently. Any answers?
It's in recovery mode. Anything that was on the phone and not already backed up is already gone. You have no choice but to restore.
-
my iphone won't allow me to trash old email messages -- I get the little window that says "Unable to Move Message -- The message could not be moved to the mailbox Trash." AT&T can't help me -- no one else has this problem, even though we're all on the same server from my company. I have restored to factory settings, but it didn't help. My email account settings are correct, the same as on my computers, and I can trash old messages on them.
What do I do now?I have had a similar problem recently and followed advice here. Specifically, I used the brute force approach. As suggested by this site, I strongly urge you to backup your mailbox before trying this fix - just to be on the safe side.
Message was edited by: Rich JG -
Moved iTunes library to Time Capsule and now can't see music in iTunes
G'day People
I moved my iTunes library to my Time Capsule and pointed iTunes to the new location via Preferences - > Advanced.
However, when I start up iTunes, it's empty. When I check the Preferences in iTunes, the location of the library is correct, that is, my music folder on my Time Capsule.
Has anybody else had this problem or know why my library is blank when, in fact, iTunes IS pointing to the location that holds the library?I moved my iTunes library
What exactly did you move?
and pointed iTunes to the new location via Preferences - > Advanced.
That simply tells iTunes where to store music in the future.
However, when I start up iTunes, it's empty. When I check the Preferences in iTunes, the location of the library is correct, that is, my music folder on my Time Capsule.
No, that is the location of the iTunes music folder.
The iTunes library contasts of the \Music\iTUnes folder and all contents and the iTunes music. wherever it may be located.
Let's try and fix it.
Again, what exactly did you move? -
I setup my 4 digit lock & now cannot login (thought it was what I wrote but not working; I have not synched my computer w/my Iphone in a
long time- is restoring to factory settings the ONLY way to unlock this? (arrggghh). Any help is greatly appreciated.Yes, that's correct.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
Maybe you are looking for
-
how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?
-
I want a GREEN Nokia Lumia 620 - where do I get it...
Hi, Why is there a picture of the 620 in green in the store, but It's not possible to buy one? http://www.nokia.com/gb-en/phones/phone/lumia620/offers/?ct=Post&opp=10 It makes me crazy. That's the only colour I want. :/ Otherwise I won't get one. I
-
Enhancement suggestion: debugging pl/sql scripts
It would be really nice if you could use the PL/SQL debugger on blocks of PL/SQL that are run as a script through the worksheet, rather than only PL/SQL functions and packages.
-
hey , i have a u.s itunes account with "none" payment method selected ! then i changed the country to try and use my friend's credit card but it didnt work then it wouldn't change back to us until i put a valid card ! how can i change without a car
-
Adapters for Cisco Process Orchestrator
Hi All, I want the steps on integration of Cisco Process Orchestration with Openstack. Are there any available adapters for this process. If not can anyone explain on steps to write the custom adapters for integration with Openstack. Thanks in advanc