Airport Extreme firmware 7.5.2 crippled my wireless network

I upgraded the firmware to 7.5.2 just before Christmas. I bought the family an Apple TV for Christmas but returned it because I couldn't stream HD from netflix or youtube. Then I noticed youtube videos were struggling to play on my laptop as well. I did a Verizon Fios Speed Test and saw I was getting 1.6 Mbps download speed and 4.8 Mbps upload speed. I read the forums regarding the 7.5.2 firmware update and reverted back to 7.4.2 and my speeds are back to normal. Verizon's test indicates 24.9 Mbps download now.
I'll be heading back to the Apple store tomorrow and give the Apple TV another try!

7.5.2 spoiled my Christmas too.
Gave touch iPods to my kids and had planned to configure them with them on Christmas Eve...didn't happen. Shame on Apple...and, shame on me for trusting firmware updates right after their release...RJB

Similar Messages

I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

Yes, you can.

How do I use Airport Extreme to create wired access point on wireless network?

Bit of an odd situation. I just went from cable to DSL at home and the modem moved from right by my computer to upstairs.
Trouble is, there's no real easy way to get a cable from the modem upstairs to my X-box (sans wireless connector) downstairs.
I could buy the wireless adaptor for the X-Box, but I was hoping I wouldn't have to spend any more money.
I have my airport extreme, and I was hoping I could use it to create a wired access point on the network, recieving the signal from the wireless modem upstairs and allowing me to plug in the X-Box.
Is this possible? If so, how? I've been through the config panel about a dozen times, but can't figure out what combination to set up.
Thanks.

Will it work if I use the express to create the network?
Yes, providing that you have an 802.11n version of the AirPort Express and the Express has been configured to "Allow this network to be extended".
Then, the AirPort Extreme can be configured to "extend" the Express network. When you do this, the AirPort Extreme will provide more wireless coverage and the LAN Ethernet ports are enabled, so you can connect an Ethernet device.
This will not be a "normal" Ethernet connection. It will only work as well as the wireless "hop" between the Express and Extreme allow.
For best results and performance, a wired connection through the hole in the wall is always best. If you decide to do this, you will need the "new" AirPort Express with both a WAN and LAN port on the device. But, you could try wireless first to see if it will meet your goals before you reach for the tools.

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Can either the Airport Express or Airport Extreme be used "standalone" to create a wireless network with access to the internet?

I want to create a wireless network for my iMac, Macbook Pro and iPad, and I'm confused about the Airport Extreme and Airport Express devices.
There is mention for both about connecting them to a DSL or Modem. Does this mean I have to obtain additional hardware before they will enable connection to the internet? (In the past, I've used a Belkin Router, which simply connected to the phone line.)
Any advice gratefully received.
Tony

Does this mean I have to obtain additional hardware before they will enable connection to the internet?
Yes, you need a modem. The AirPorts are routers only. They do not have a modem built in, so you will need a modem if you want to be able to connect to the Internet.
The Belkin device that you have used before is a modem/router. It combines the functions of a modem and router in one package.

Two Airport Extremes no longer working in tandem to extend network

Trouble has cropped up with my home network, I think dating back to the installation of Leopard (though I'm not sure about that). I have been using two Airport Extreme (both 802.11n) to extend my wireless network throughout the house. For some reason, the two no longer seem to be communicating with each other. I have done factory resets on both, gone through the streamlined setup routine outlined in the Knowledge Base article on configuring Airport Extreme networks, and no dice. The remote station, once set up to extend the base network, no longer appears as a separate station in Airport Utility, and its indicator light is a steady amber. I seem to recall this was the case when it was working, too.
Any thoughts?

Here is some more info. I had a look at the posts on this issue from Nov. 19th, where Jane describes setting up the two base stations in a particular sequence using the assisted (not manual) setup process. My problem is that none of the relevant options ... allowing the network to be extended, designating the second base station as a remote station, etc ... come up in the assisted menus. I can only get to those options via the manual setup.
I would also note that I called Apple about this problem. After being informed, to my extreme frustration, that Apple does not support manually setup WDS configurations over the phone, the Apple rep told me (in a decidedly dismissive tone) that I should be using the assisted setup process. So Apple has confirmed that this is the way to go ... but Airport Utility doesn't seem to work that way.
Help? Anyone?

Airport extreme firmware update screwed up my IP sharing and internet

I am having all the same problems -
1) I upgraded to the 7.1 firmware
2) I got the 'double NAT' error, but no problems connecting to the internet
3) When I turned the bridge mode to off, I lost my internet, so I
4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
(If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
Now I'm afraid to touch anything!!

kayek wrote:
I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
{quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
1. Open AirPort Utility.
2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
3. Select the specific firmware version you require.
4. Click Download.
5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
6. Choose Base Station > Upload Firmware.
7. Select a firmware version and click OK.{/quote}

Airport Extreme Firmware Update 7.3.2 no longer connects to internet

Automatic Updates recommended Airport Extreme Firmware Update 7.3.2, which I accepted (BAD). The Airport Extreme does have a green light, but CANNOT connect to the internet. Cannot "Check for Updates" with Airport Utility (option key down) because I cannot access the internet. Airport Utility shows 7.3.2, but nothing lower. Is there a location on the mac where the older driver resides?
Numerous restarts, resets, etc with both the Cable Modem and Airport Extreme and my MacBook do not help.
How do I download 7.3.1? Can I? How can I revert?
I can access the internet from another network, hence this email.
Any suggestions would help!

When I updated to the Airport Extreme to 7.3.2 firmware it was dropping wireless connections randomly, Today I reverted back to 7.3.1 and looks like it is staying up for now but I am still shell shocked. To revert back in Airport Utility:
1) Hold down the option key(Mac), the Control key for Windows at the same time clicking on Check for updates
This will open a popup window with the previous versions, select the Airport Extreme Firmware 7.3.1 update and click download.
2) After the download is done, from Base station file menu drop down select Upload Firmware, you will get a choice to download different firmware updates, select 7.3.1.
That should install the 7.3.1.
There you go enjoy.

Nortel VPN still broken with Airport Extreme firmware 7.1

I've just recently started using the NAT'ed mode of my 802.11n Airport Extreme and the the Nortel VPN connectivity is still broken with firmware 7.1.
I've setup a side by side config using the new Airport Extreme and my older Airport Express to make sure the issue is indeed with the Airport Extreme.
Here are the details of my setup:
ISP: NTT/GOL B-FLET (PPoE)
Wireless Config #1 - Airport Extreme firmware 7.1
Wireless Config #2 - Airport Express firmware 6.3
Client #1 - Nortel Contivity VPN V06_01.014 Windows XP 802.11g
Client #2 - Nortel Contivity VPN V04_86.033 Windows XP in Parallels 802.11n
The odd thing is that it isn't totally broken. The VPN connection is made and low bandwidth transfers work fine (ie. ssh, http requests), but higher bandwidth transfer fail to complete (ie RDP/RDC, ftp's, Outlook xfers).
When my clients are on the Airport Extreme Network, they have the issue but don't have the issue on the Airport Express network.
Is anyone else still having problems with Nortel VPN ? Does Apple have any suggestions ?
Thanks,
Eliot

I'm using Apani's Nortel VPN client (the most recent version) on my Mac mini, and the Windows version on my Windows XP notebook computer. Both were broken with the original AEBS firmware (7.0), but now both work well with the updated 7.1 firmware.
Keep experimenting - I'm sure you'll get it working.

Airport Extreme Firmware update?

Hi all, as part of a seperate issue am experiencing with network transmission speeds I'm checking to see if I can update my Airport Extreme firmware.
Currently, the Software Updates section doesn't find any updates and the current firmware I'm using is 4.80.46.0 yet there appears to be a new version at http://www.apple.com/support/downloads/airportextremefwupdate.html
Is that Firmware applicable? Is there a resident page that shows all of the Airport Extreme wireless cards firmware versions and updates?

Bravo,
OK... I see....
Then the Software Update would the in fact show you the latest updates for the Airport Extreme Card.... I have never seen a firmware update for the card but then it could be contained within the update itself.
The latest Airport software is 4.2...
My firmware version on the G5 iMac is 405.1 (3.90.34.0.p18)
Nothing we can do about that, that know of.
Whiskey Tango... Out

Multiple issues arose after upgrading Airport Extreme firmware to 7.41

I recently upgraded my Airport Extreme firmware to 7.4.1 and instantly all my windows machine had issues connecting to the wifi, my Apple TV could no longer connect including a Nokia E71. The only devices connecting were the MacBook and iPhones. For the Windows machines i resolved this by forcing to authenticate using WPA2 AES encription. But the Apple TV and E71 couldn't connect. Also some VPN connection issues arose with my windows machines (iPsec). After 2 days of reluctancy to downgrade the firmware, i was left with no option other than to downgrade to 7.3.2.
I am 100% sure there is a problem with the new firmware, downgrading fixed all the issues without any configuration adjustment.
Apple you dropped the ball on this one, when are we getting a patch to 7.4.1?
Message was edited by: Macinit

Open Airport Utility. Select the airport from the list on the left (if you have more than one) and then choose Manual Setup.
On the Summary tab that opens, click on Version (that's the word Version, not the version number next to it). A drop-down arrow appears - click it and you should get a list of versions to choose from. 7.3.2 seems OK. Pick it and the device will downgrade and restart.

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

Airport Extreme Card (will not automatically connect to home network)

Running OSX (10.4.7) on a G5 2.0 DualCore. I just had an Airport Extreme Card installed by Apple a week ago. Everything was working fine with WiFi ( I use a Lynksys Router. But oddly now when I cold boot up, the Airport Extreme will not automatically connect to my home network. The little Airport icon on the upper right is always greyed out ( even though clicking on the icon... says that Airport is "On" ). So I now have to manually select my home network everytime I boot up. The first week or so though, I didn't have to do this...it just automtically connected to my home network. I made no changes to the router settings, nor the Network prefs.

I have been able to get my home network running with simultaneous access to the internet with the MacMini and the PB G4 via a WL router (Netgear WGR614v4 with four ethernet ports).
This was the process:
1a) Turned off airport on both computers.
1b) Turned off both compters and
1c) disconnected the router from the cable modem.
a) Disconnected ethernet cable from WL router to Macmini.
2b) Powered down the router for 10 seconds.
3a) Keeping both computers unpowered,repowered router and pressed the reset button (behind an unmarked tiny hole in the back of the router) then re-connected it to cable modem. Waited 30 - 40 seconds until internet service lights flickered green.
3b) Reconnected ethernet cable to MacMini and turned on power for MacMini. No Airport running. With administrator privilege I configured in Syst. Prefs. "Sharing" folder Internet access using "Built in Ethernet" port for computers running "Airport".
4) Turned Airport network on in MacMini and started browser.
Result: Internet connection established.
5a) Powered up PB G4 and then turned Airport on.
5b) In Syst. Prefs. in "Sharing" folder turned Internet Sharing off. But set "Share your connection from Airport" to computers using: Airport with check-mark. (No Built-in Ethernet and no Built-in FireWire!)
5c)Started browser. Result: Internet connection established.
6a) In the Finder window of both computers I clicked on "Go" in toolbar and looked for the name of the other computer, which were listed as alias besides the "Library" and "Servers" aliases. Clicking on the computer alias brought up the 'Networked Globe' and a control button "Connect".
6b) Clicking on "Connect" brought up the mounted drive of the other computer.
Result: Wireless network operational.
PS: I don't dare yet using encryption for the airport network. That's for another day.
Power Book G4, MacMini Mac OS X (10.4.7)

This AirPort base station was unable to extend the wireless network.

I have an AirPort Extreme in the lounge connected to BT infinity.
I also have an airport express in the kitchen connected to a stereo system.
I have had this set up for around 12 months.
The airport express will not extend the wireless network.
I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
Can someone please shed some light on this?
Maybe I have it in a wrong setting or summut....

G Beach wrote:
I am also experiencing a recent failure in my Airport devices no longer extending my wireless network.
My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem. Needless to say, the firmware upgrade did not resolve anything.
If I didn't know better, I'd have thought I wrote the above.
I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since.
Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility. Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
The latter two started flasing amber and giving the "unable to extend wireless network" error message.
So I'm wondering if you are similarly using 5Ghz?

Airport Extreme firmware 7.5.2 crippled my wireless network

Similar Messages

Maybe you are looking for