Airport Extreme for more than 50 users

Hello,
I need to make a wifi network for 300 users, as Airport Extreme can manage 50 users, can I connect 6 Airport Extreme units in cascade or throw a switch to make it?
Will the DSL manage with it?
Thanks and best regards.

Yoryi wrote:
I need to make a wifi network for 300 users, as Airport Extreme can manage 50 users, can I connect 6 Airport Extreme units in cascade or throw a switch to make it?
I can't give you a comprehensive answer, but here are some thoughts:
- A "255.255.255" subnet (which seems to be the only type that an AIrPort base station supports) only allows 254 unique IP addresses. This means that you'd have to use two different subnets to support 300 users. This in turn could have implications for resource sharing.
- I believe you'd have to define a separate Wi-Fi network for each AirPort Extreme, allowing the first to issue IP addresses in the range x.x.x.2 through x.x.x.51, the second x.x.x.52 through x.x.x.101, and so on. Each user would be assigned to a particular Wi-Fi network.
Will the DSL manage with it?
If there's much Internet access from those 300 users, that would put quite a load on a typical DSL link. What data rate is that DSL link supposed to provide? If you divide that by 300, is the result an acceptable rate per user?
My overall impression is that AirPort units and DSL aren't up to the task you want them to perform.

Similar Messages

Can the AirPort Extreme support more than one printer at a time?

can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?

can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?
Yes.....IF.....you use a powered USB hub.
I have had 3 printers connected at the same time in the past and assume that more would work as long you have a powered hub to support the number of ports that you need.

HT2508 Airport express for more than one device at the same time.

I just set up my Airport Express on my MacBook, but when I try to use this wireless connection on my iPad, I have to disconnect from my existing connection on my MacBook first. How can I use both devices at the same time without having to disconnect?

Hi,
Yes.
Jim

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do? Many apple phone users are especially fed

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.

Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User

OATS Load test is not able to scale for more than 10 users

Hi,
I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let me know if anybody faced similar issue and was able to resolve it.Is there some setting to be done?
Thanks,
Ritesh
Edited by: user766882 on Aug 20, 2012 9:07 AM

Hi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM

Lock user ID which are kept idle for more than 30 mints.

Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
Babu

Dear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain.

Solaris users who did login for more than months

Hello All,
Can any one help me out to find those users who did not login to the system for more than a month or more? I need to do some user clean up.
Thanks..
Edited by: user4027740 on Apr 13, 2011 12:35 AM

USERS=`grep -v NOLOGIN /etc/passwd | cut -d: -f1`
for USER in $USERS
do
echo "---------- $USER --------------"
last -n 1 $USER
done
############this script helps you find out the last login time of all users in /etc/passwd file###################

Starttransaction for more than one user

Hi,
is there any FM, TCODE or customizing way
to set an starttransaction for more than one user?
I see the starttransaction in table ARR_DATEU under
ID = START_TCD.
Thanks.
Regards, Dieter

Hi Thomas,
thanks for your answer.
I Find (by debugging) FMs: NAVIGATION_GET_START_TCODE and NAVIGATION_SET_START_TCODE.
Regards, Dieter

Unable to login for more than 2 users concurrently

Dear All,
We have purchased the terminal server licenses for 8 users and install it. however, it is still limited for 2 users to login concurrently. may I
know what is the issue that causing the issue? could it be that the licenses is not installed correctly?
Thanks

Hi Henry,
Thank you for posting in Windows Server Forum.
Here providing brief explanation for difference between RDS per User & per Device CAL. please go through following description.
1.User CAL :
A User CAL allows a single unique physical user to access Microsoft server software from many devices, such as a work computer, a home computer, a laptop or a personal digital assistant (PDA), without having to acquire CALs for each device.
2. Device CAL:
A Device CAL allows any number of physical users to access Microsoft server software through a single device.
For additional details refer below article.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
In addition, you can also refer beneath thread for accessing RDP connection for more than 2 users.
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

SU01 user as reseller for more than one customer?

Hi,
We have a requirement where internet user act as a reseller and can place order for more than one customer in ISA R/3 edition. In the XCM configuration i have selected the user as R3_SU01UserStandalone and then followed the activity given in the SAP Document:
http://help.sap.com/saphelp_crm40/helpdata/en/03/f6ce51eb8e4dbe82b9ca75e5c74fe6/frameset.htm
Can anyone provide a solution what other steps i need to follow for this issue.
Thanks
Ankit

Dear Shankar
You have not specified whether the scenario is MTO or MTS. If it is MTO, stock will be allocated against sale order as and when MFBF is done. If it is MTS, then go to OMJJ, select Movement Type and give 292 and execute. Now select "Field selection (Enjoy)" tab on your left and there maintain the option as Required Entry for the field "KDAUF" and save.
Now go to MB1A, give movement type 292 with special stock W, plant and storage location and execute so that the system will ask for sold to party code. Give the sold to party code and enter material code, stock to be reserved and save.
If you see in MMBE now, those stocks will be displayed as special stock.
thanks
G. Lakshmipathi

What causes my ipod touch 4g to become extremely hot when i play games or surf the web for more than 30 minutes?

my ipod touch 4g becomes very hot when play games or surf the web for more than 30 minutes. does any body know why?

Maybe the solution is that you iPod is slow is because you are not closing your apps after you use them. To do this you must:
1. Press the Home Button to get out of that app
2. You will return to the Home Screen
3. Click the Home Button twice, (do this quite fast, But not TOO fast)
4. A bar with all your apps that you have come out of will be on the bottom of the screen
5. Hold down one of those apps
6. They will start to "jiggle"
7. A little red circle will be beside all of the "jiggling" apps
8. Press that little red circle and those apps will close (NOTE: This is NOT deleting your apps)
9. Now you apps are closed NOT deleted
10. Your iPod will now speed up in: Browsing, downloading, syncing and much more
11. (Bonus) - To DELETE an application do the same thing ( But not clicking the Home Button twice) and all of your apps which you downloaded will "jiggle" and there will be an black circle with an X in it, click that X to DELETE that app and a dialog will pop up and say: "Do you really want to delete this app?" If you want to: Click yes.
And that is how to speed up your iPod
Bonus) - is how to DELETE an App
Thank You,
Apple 5

Please , I wonder if I can subscribe for more than one sync accout on the same Desktop? I mean that we are multi-users for the same desktop , so we need some privacy.

I and my brothers and sisters use the same desktop , so we need to subscribe for more than a single sync account , and I don't know how. Thank you

If you each have a separate Windows account then each of you should automatically have a separate Firefox profile.
If you use the same Windows account (not much privacy in that case) then you will have to create a separate profile for each of you and a desktop shortcut to start each profile.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

HP LaserJet 1300 not connected for more than 1 day

Since Apple came out with the Yosemite printing system, I cannot print wirelessly for more than one day. I have reset my modem, changed the location of my network, unplugged and repowered Airport Extreme, started in Safe Mode, and more.
No matter what I do: I either get: a printer name with a number in parenthese or a long Bonjour number when deleting and adding a printer on my laptop.
Whatever I do, it only works from about 24 to 36 hours. Then when i go to print it says Printer is Not Connected. I can delete and add again, usually it will find the printer, add it, print, and then a day or two later, the printer is not connected again.
But I have to keep redoing this both to my laptop and my wife's, and we have not had reliable printing since Yosemite cane out about October 18, 2014.
Equipment
iMac:
Operating Sysem: 10.10.1
Printer: HP LaserJet 1300
Network: Comcast
Router: Airport Extreme
The only thing I have not done I can think of is reset Airport Extreme. I can do that, but don't know if I will then have additional problems.
This all started with the YIosemite update but at this point I don't know if it is an HP-related problem or a general Yosemite-related problem.
I appreciate any help I can get. Have wasted probably 40 hours over two-plus months trying to get this fixed. When Apple could not fix it back in October, the person referred me to HP. The person at HP Business did not know my printer was supported for Yosemite although his own web site said it was. So that was not much help And after resetting printers, deleting and adding printers, etc., I don't know what else to do.
Thanks for listening.

Did it start not syncing after the iOS 4.2 update?

Airport Extreme for more than 50 users

Similar Messages

Maybe you are looking for