Airport extreme has problem works with firmware 7.6.1

After I update my airport extreme to 7.6.1, my iphone4s, 3DS, printer are failed to connect to the airport while my mac and iPad are work pretty well just like before, anybody can help me?????

This thread has a few fixes. I posted my fix on page 3 on February 8, 2012 at 7:20p.
http://discussions.apple.com/thread/3706973

Similar Messages

Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

RRoger, everything is working fine.
So, what is the actual problem here? You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
What speed is your Internet provider delivering to you?
The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
If you want to double check this, please provide the model number of the Vonage, and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

ASP application has problems working with oracle database 8.1.7

ASP application has problems working with oracle database 8.1.7 through both oracle ODBC driver and Microsoft ODBC driver
We have an ASP application running on Windows 2000 server, and with 8.1.7 Net8Client and MDAC 2.6 SP1.
The application worked fine with an Oracle 8.0.5 database.
After upgrading oracle database to 8.1.7.0.0, our ASP application works fine except when updating the same data record more than once. The application is not saving our updates.
We tested our application using Oracles ODBC driver v8.1.7.5.0
and experienced more problems. We had problems just bring up our data entry pages. In either case, we are returned with some 505 errors in our browser, problems with the ASP pages and IIS, the page is not displaying.
If anyone has some suggestions on how to fix my problem, please advise. Thanks in advance.

thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

Is there a way to update firmware on airport extreme card to work with "n"?

I have a airport extreme card in my G4 Powerbook and want to know if I can somehow update that card to make it compatible with the new "n" wireless standard?
Even if I can't, should I update the firmware and if so, how do I go about doing it?
Thanks!
Dan

No there is no software update that will give that card 802.11n capability.
Your PowerBook can join an 802.11n network as long as that network is configured to operate in an 802.11b/g compatible mode. You will not get the speed benefits of 802.11n since your PowerBook will be operating at 802.11g.
You may want to take a look at QuickTek's products.

I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8. Although it does work with the laptop using a ethernet cable. Has anyone else had this issue and can you please tell me how to resolve the problem?

Windows can have issues with the wireless name.
Make sure the name conforms to windows standard.
Short, 2-20 characters
No spaces,
Pure alphanumeric.
eg AEwifi is a good wireless name.
Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
Test also by removing the security and just see if you can connect if the short name doesn't help.
WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

Airport Extreme won't work with modem.

Either I have internet access but no wifi and with blinking amber light, or I have the green light on the Airport Extreme but no internet. This is the first time this problem has cropped up; all previous modems (linksys etc) had absolutely no problems (except age). Setup: I have Mac, Macbook Pro, iPad, iPhone 5S. Tried to set up AE both with cable to Mac, and without (using wifi). No go. Location is Manila, Philippines. Cable internet provider is Skycable. Can someone help me with a step-by-step instruction? By the way, the Version is 7.3, I think.

I am not sure how your cable company works.. but they supply two kinds of modems.. pure modem type where you must plug in a router.. and a device which is combined modem and router.. it will mostly have 4 ethernet ports.. the pure kind will only have one (maybe second one for TV).
The actual model number of the modem may help.
The setup is as follows.. pure modem .. the AE must be setup in router mode.. ie on the network tab it shows DHCP and NAT.
On the internet tab it will be set for DHCP.. and you will then need to make sure the modem is passing you the public IP.. to do that you must power cycle the cable modem.. turn it off for 20min and then start up again.. with the AE started up 2min later.
If 20min is still not long enough try 1hr or overnight.. or ring your ISP and ask for the IP to be reset.
Setup for modem gateway.
The AE must be in bridge mode.
All routing is controlled by the modem and the AE is working as wireless and switch only. This is the correct method.. you can turn off wireless in the gateway or configure both to work.
In both cases the AE must be plugged by ethernet into the main modem.. WAN AE to LAN modem.

Airport Extreme Don't work with windows

I have an airport extreme, it connects and give internet to my 2 macbooks fine. But when i get onto a windows computer (laptop) it connects to the extreme but don't have internet. As i have changed my o.s. to Ubuntu 10.10 it still connects to the extreme but still yet has no internet. It is that way with every windows computer i have. But it does work fine with my 2 macbooks any help?

How is your network setup? i.e. dsl/cable > APE > Mac/PC/Linux ?
Is the APE setup as a DHCP server? Are the non-Mac's setup as DHCP clients with both IP and DNS to obtain automatically?

Airport Extreme ethernet not working with Windows XP

Windows XP no longer connects to the Internet via the Airport Extreme ethernet port. XP says the cable isn't plugged in but when I connect XP directly to the DSL modem it works fine. When I connect my MacBook Pro to the Internet through the Airport Extreme ethernet port it works fine. (I'm sure it's connected by ethernet because I do +sudo ifconfig en1 down+.) I can't figure it out. I'm relatively certain Airport Extreme is blocking XP from connecting via ethernet but I'm not certain. It worked without a glitch for about two years. Lightning fried my old DSL modem and ever since I got the new one, XP "can't see" Airport Extreme, but will connect directly to the DSL modem and the net without a hitch. Any insight will be much appreciated.

I'm not sure why your PC is not able to connect to the AirPort Extreme Base Station's (AEBS) Ethernet port, but it is likely the lightning strike may have something to do with it. I'm also a bit surprised you're were able to run the "sudo ifconfig" command under Windows.
To rule out general communications issues between the modem and the AEBS, I suggest that you try a complete power recycle of all your network components as follows ...
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AEBS, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Airport Extreme won't work with non apple products?

this is a recent problem after years on working ok.

You have not given us enough info to say anything. you haven't asked a question.
AE work fine as AP with non-apple clients.
I have multiple phones and wireless devices from numerous brands working with AE and TC.
What you might find is that naming of the AE has become more of a problem.. so you need to use SMB naming.. ie short, no spaces and pure alphanumeric, for the AE itself and the wireless SSID.
You might also find the latest firmware upgrade did nobody any good. If your AE is the flat one, go back to 7.6.1 which IMHO works better.
If your AE is old it could be just faulty.. it might need replacement.
If you want to do things like wireless extend, then there are huge issues with mixing apple and non-apple wireless routers.. but that is not new.. it has been an issues since Apple routers came out.

Airport extreme won't work with Optimum cable

Bresnan Cable just switched to Optimum. My internet no longer works using Airport Extreme. Cable is working as is wireless. Optimum support says it has something to do with external versus internal IP addresses and weather my Airport Extreme was configured as a switch or router?

I have a toshiba laptop and it works prefectly with a conceptronic usb card. But you must set up the Base Station only with the default options. I mean that you can not hide the SSID, or make an access control with Airport Extreme. You only set up the default options and it works perfectly. When I try to place an access control or hide the network then it doesn´t work and wait an ip as you say in your post.
If you want to connect from Windows to the Base Station you need to close your firewall and no other cable into the Airport Extreme, only the cable that you are connecting to access the Base Station. And it will work.

Airport extreme won't work with usb drive

I bought a USB hard drive and formated OSX extended journaled on my MBP. I plug it into my Airport Extreme and the AE will not recognize that a drive has been connected? If I plug it back into my MBP there is no problem.. it works.. but the AE does not recognize its existance.
I've seen many others online who've had the same problem... some have said plugging a powered USB hub into the AE and then adding your drive to the hub works.. but this seems like a rediculous work-around.
Does anyone know WHY this is happening? Very frustrated that the Airport Extreme does not JUST WORK.
Tim

We understand that the drive works if you plug it into your Mac.
Please list each and every step that you are performing when you now attempt to connect the drive to the AirPort Extreme.
Where are you expecting to "see" the drive on your Mac?

AirPort Extreme Won't Work With My DSL???

I just switched back to Mac after being in the PC world for many years. I just couldn't take it anymore. So, I bought a 24" 2.8 GHz iMac. Wow, what a great machine. I can't believe what tis can do when compared to the original Apple computer I used many years ago.
One reason I switched back was the "easy plug and play" promise. Right now that promise is a little tarnished. My when I plug in my AirStream 5100 Ethernet ADSL modem into my Airport Extreme all I get is a blinking yellow light. Yes, the AirStream does work with the iMac when I plug it into the Ethernet plug on the back of the iMac. My ISP stepped me through the needed steps because it wasn't "plug and play" either. I'm at a loss here. Does anyone have any idea what's wrong or steps to solve the problem? Thanks.

Does your ISP require PPPoE? If so you will need to configure the AirPort Extreme base station (AEBS) to connect via PPPoE. You would also configure your iMac to NOT use PPPoE.
Another possibility is that your ISP records the MAC (Ethernet hardware) address of allowed devices. If they do this they could have the MAC address of your iMac on record and not allowing the AEBS to connect. If this is the scenario, you will need to have your ISP switch the allowed MAC address to the AEBS's WAN port MAC address.

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

Airport Extreme no longer working with DSL

I have a Westell B90 DSL modem connected via ethernet to my Airport Extreme (using DHCP) and the two have happily co-existed for four years. About two days ago, it stopped working. It seems the AE can't get an IP address from the modem. The modem still assigns an IP address and works when connected directly to my Macbook Pro (that's how I am connected now). I also have an Airport Express that I use for music and signal relay. I tried to use it as the base station - that also failed to get an IP address. Help!
thanks

Thanks. I was suspicious of Verizon, but I spent an hour on the phone with them yesterday and they swore it was not their fault. Anyway...
The modem is not acting as a router as far as I know. It is a fairly simple box with just a power plug, phone line jack, usb jack (unused) and the ethernet that connects to the AE. The AE is currently set to distribute IP addresses using DHCP and NAT. We have four laptops in the family and I need them all to work. We live out in the country, so there is no need to be secure.
Thanks again.

Adjusting Airport Extreme 11n to work with Linksys Adapter 11b. Possible?

What adjustments, if possible, do I make to my AirPort Extreme 11n Router to allow my Linksys Desktop Adapter 11b to connect another PC wirelessly to the Internet?

By default, the Airport Extreme base station will support both 802.11b as well as 802.11g connections. You can use the Airport Admin Utility to check the settings of your Base Station, to make sure this default setting has not been altered to function with 802.11g connections only.
There are a few other considerations when attempting to connect PCs (particularly those running older versions of Windows) wirelessly to an Airport Base Station. A lot of tips and tricks can be found via the links at http://tech.ifelix.net/index.html

Airport extreme has problem works with firmware 7.6.1

Similar Messages

Maybe you are looking for