Airport Extreme HD access and Norton Personal Firewall

So I have set up my Airport Extreme base station and all is working fine. The only thing is the access to the shared HD from my old PC.
I have found out that I can connect to it with Airport Disk Utility if I disable Norton Personal Firewall. It then works fine when I start the firewall again, but the next time the PC is started up, it has to be disabled. I have given Airport Disk Utility the highest level of permission in the firewall settings, but that does not seem to help.
Has anyone found a solutions for this?

The only way I know that this would have been that "seamless" would be via Back to My Mac (BtMM). BtMM would have required that you had either a MobileMe or iCloud account. Does this sound familar?

Similar Messages

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Cannot open port through Airport Extreme to access security system DVR

I have internet access through Bellsouth DSL -- modem only. We had a security system set up around a DVR recording images and connected to the internet through a Linksys router. We would use a client on outside computers to connect to the security system dvr and see what was happening (live or recorded). I switched out the Linksys for the Airport Extreme, and now we cannot connect to the DVR.
Do I need to manually open a port to the DVR? How do I do this? The DVR connects to the Airport Extreme via Ethernet, and as far as I can tell, the Airport Extreme connects to the DSL modem via Ethernet using DHCP. We have a static IP address. I thank you in advance for any answers, and I apologize if I'm not giving enough information.

Let's double-check your Port Mapping setup on the 802.11n AirPort Extreme Base Station (AEBSn) ...
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: 10.0.1.4
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 6746
o Public TCP Port(s): 6746
o Private IP Address: 10.0.1.4
o Private UDP Port(s): 6746
o Private TCP Port(s): 6746
o Click "Continue"

How do i set up my airport extreme to access from my work windows based PC

How do I set up my airport extreme to access from my work windows based pc?

To mount the AirPort Disk in Windows 7 or Vista:
Open the Network browser by double-clicking Network on the Windows Desktop.
The AirPort Extreme base station name should appear in the browswer.
Double-click the name and you should get a login prompt.
Now depending on how you set up disk access:
In the Name field, either enter the user account name or for base station/disk access, leave this field blank.
In the Password field, enter the base station, disk, or user account password.
Select the volume(s) you want to mount, and then, click OK.

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Norton Personal Firewall messages at startup won't go away

I used to have Norton Personal Firewall (NPF) installed on my G5 iMac. For some time now, whenever I start up, I get two messages related to NPF. The first one says that I have installed new system software and need to restart my computer. The second one says that NPF "cannot launch the kernel extension" and that "some features of NPF may not be enabled."
I have been just ignoring and closing both of these messages, but recently I have been doing a cleanup, deleting files I don't need any more, and when I recently upgraded my Norton Antivirus software, I decided that NPF was superfluous, since Mac OS Leopard (10.5.5) has its own firewall. I tried to use the Norton uninstaller to delete the program, but the uninstaller does not list NPF in its list of applications to uninstall. I have done a Spotlight search for any NPF-related files and have also deleted all my old System 9 folders. I'm still getting these messages, though. Has anyone else ever seen this problem, and do you have any suggestions?
Thanks!

Thank you very much, but this is an older version (1.0.2) of the Symantec Uninstaller that came with NAV (1.1.1). As I mentioned, when I open Uninstaller and it searches for installed applications, Norton Personal Firewall does not show up in the list. So I can't use the Uninstaller to uninstall NPF. But I appreciate your attempt to help me.
I wonder if somehow there are still some "residual" files remaining from NPF? If so, I have no idea how to find them, since they don't show up with a Spotlight search. Maybe it is something that is somehow embedded in the System?

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

Plenty of suggestions.. only you can find out which one is correct.
What model AE? What firmware?
Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
Fix the wireless channels.. so it doesn't flip flop like a dying fish.
There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1 although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
Lastly is it stable if the distance is 3M direct line of sight?
If not then get a high power wireless AP and use that instead.

Vonage, AirPort Extreme Base Station, and Comcast

I just picked up an Airport Extreme Base Station, and wanted to use it to get my MacBook Pro on my home network. However, I can't get it to actually provide an network connection to the MacBook. In the Network pane of System Preferences, under the Network Status, AirPort has a yellow icon, and the following message: "AirPort is connected to the network HulkNet. AirPort has a self-assigned IP address and may not be able to connect to the Internet."
Here's my current setup:
Comcast > Cable Modem > LinkSys RTP300 > PowerMac, PC, AEBS
I have the "Distribute IP addresses" disabled on the AirPort, and the internet for the PowerMac & the PC work fine. In the network status of the RTP300, the AEBS is listed as having an IP address of it's own.
Any gurus out there that can help me figure this out? I just want to be able to access my home network from anywhere in the house!

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network"

I have an airport extreme base station and have no clue how to set up a private wireless network instead ton open one i have now.

I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.

Which version of the AirPort Utility are you using?

Cannot create WDS with Airport Extreme 802.11n and Airport Express b/g

I have gone through all the steps to set up a WDS with my Airport Extreme Dual Band and my Airport Express b/g.
Every time I try to set it up and update the AX the AX disappears from the airport utility and I can no longer see it. I can however set it up to "join a network" just fine.
Anyone have any idea why I cannot do this? I haven't seen anything saying that the AE is not compatible with the AX.
Ideally what I would like to do is have the AX extend the network and then use an ethernet cable to connect it to an imac g4, thus giving the computer "wireless" internet.
Any ideas or suggestions?
Thanks

So just to clarify even if I was to buy a new "n" AX I would still be relegated to "g" speeds?
That's correct if you use the WDS settings on both the AEBS and AX.
But, if you had the "n" AX, you could configure it to "extend a wireless network" and maintain "n" speeds on the network. There would still be some bandwidth loss...10-15% or so...that's unavoidable unless you go to an ethernet connection method.
Do you think for my application it might be better to just buy a reputable wireless usb dongle?
If I understand correctly, you need an ethernet connection for a computer. Why not consider a pair of ethernet powerline adapters? One device plugs in near your AEBS and the other near the device that needs the ethernet connection. The pseudo ethernet signal is conducted over the AC powerlines in your home. This is the next best choice when you can't run an ethernet cable through the house.
This would be a faster and more stable connection than any type of wireless application. It's plug and play. In addition to the powerline adapters, all you'll need are two short ethernet cables to connect one adapter to a LAN port on the AEBS and another short ethernet cable to connect from the adapter to the G4's ethernet port.
Any electronics superstore will have a selection to look at. The cost is approximately $75-125 for a pair depending on how much speed you choose.

Airport Extreme Base Station and 2wire Modem / Router

I have Yahoo DSL with a 2wire modem / wireless router combo. I have an iMac and a MacBook both running Leopard. I can't seem to get the Back to my Mac feature to work. I'm currently running the trial version of .Mac. I'd like to get a full .Mac account but I want to be sure I can utilize the Back to my Mac feature. If I were to bridge an Airport Extreme Base Station to the 2wire would that solve my issue with Back to my Mac. Additionally I like the idea of being able to plug a printer of external hard drive into the Airport Extreme.
Any advice is greatly appreciated.

I got it to work. I purchased the Airport Extreme Base Station and took the following steps which I found here http://forums.macosxhints.com/archive/index.php/t-68141.html
First connect directly to the 2Wire with the Ethernet cable.
Instructions from 2Wire:
1. Clear the HomePortal to Factory State –can be accomplished two ways
2. Go to http://homeportal/management
3. Click on Resets
4. Click on Reset to Factory State
5. Click Continue
6. Have customer press Hardware Reset button with paperclip (HG products only and BellSouth HWs)
7. Have customer unbend a paperclip
8. Have customer insert paperclip into recess for Hardware Reset button (outlined with Red circle) on back of HomePortal.
9. Hold paper clip in for ten (10) full seconds
Next steps:
1. Go to http://homeportal/management again
2. Click on Configure under Broadband Link
3. Enter VPI 0 and VCI 35
4. Click on Disable PVC Search
5. Set Connection Type to Direct IP
6. Click Submit/Save
7. Have cu go to http://homeportal/management
8. Click on Configure Services
9. Have cu Uncheck Enable Routing
10. Click Submit
Airport configuration:
1. Open the AirPort Admin Utility and select your Base Station.
2. Click Configure and enter your password.
3. Click the Internet tab.
4. Choose PPP over Ethernet (PPPoE) from the Connect using pop-up menu.
5. If required by your ISP, enter your user name, password and service name in the appropriate fields. ( Your name and password is you full email including the @sbcglobal.net part and your email password)
6. Click Update.
7. After the base station restarts itself, quit the AirPort Admin Utility.
If that doesn’t work call apple and they should be able to help with the airport configuration.
Back to My Mac now works. Hope this helps someone else.
Message was edited by: WalrusBoy

If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?

Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP.

I have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

i have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

Read the user guide:
http://support.apple.com/manuals/#airport

Airport Extreme HD access and Norton Personal Firewall

Similar Messages

Maybe you are looking for