Airport extreme instalation on a Mac PRO

I just bought a airport extreme for my Mac Pro, and it doesnt't come with any instructions on where and how I have to install the card on my Mac pro. I looked for support and I also couldn't find anything about it. Can somebody send me a link or tell me where is the slot inside the Mac PRO? when I open the compu there is a sketch on how to install memory, why they don't do that for Airport cards?
Thanks

The reason there are no instructions to install the Airport Extreme module is that the installation is not supposed to be performed by the end-user. You may have noticed that the cards are not sold online by the Apple Store.
Slot the module into the slot just under drive bay B - and attach with both brass screws - then clip on two of the antenna cables. It really makes no difference which ones. Most seem to be attached with the antennas lablelled 1 and 2.
The finished result looks like this.

Similar Messages

How do I install a airport extreme card in a mac pro (Intel 2008)

How do I install a airport extreme card in my mac pro (intel) 2008 computer

What Wifi Cards Do Mac Pro 2008 model use???
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

How to setup a network setup with an airport extreme card in a mac pro

I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
I would have thought that the two networks would be detected automatically.
Please some advice to solve this problem
Imac G5; Mac pro Mac OS X (10.4.4)

You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

Installing Airport extreme card for 2008 Mac Pro

After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
thanks, Craig
http://discussions.apple.com/thread.jspa?messageID=6563623

Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

Installing Airport Extreme Card in new Mac Pro 2008?

Hello, I bought the upgrade kit for the airport wireless n up at the apple store and I am trying to install it in my new Mac Pro 2.8 octo.
I found where to install it and I did install it but Im not getting any connect at all, though it says airport is on. I installed the software on from the CD it came with also. I am using a D-Link Xtreme Router model 655.
I read on another forum post that you might have to install a wire for the antenna on top of the card. I didn't see any wire when I installed so maybe that applied to the older mac pros..
any help would be appreciated.
These cards are compatible with my router right? I know my macbook pro n wireless connects fine.
Thanks!

hi kevin.
I also bought air mac card at apple store of japan.
And I installed that card at my new macpro by myself.
Apple store's genius people said to me, its installment takes 30min,so
I tried intalled airmac card and working normally in now.
But this is not customer install part.I think. They did not gave any install
manual for this part.
So I installed this part at mac but it was not working at that time.
After googling,I found some miss at my work. That is not connecting cables at network card.
You have to connect cable at your network card for using.
Also you can find your conneting cable at your new mac.
Please find connecting cable and connect to your network card.

What model of Airport Extreme Card for 2007 Mac Pro 2.6GHz

I am trying to find what model of Airport Extreme Card I need to install into my 2007 Mac Pro 2.6GHz
I understand that there is a 2008 card which is incompatible, so I don't want to buy the wrong one.
Any help appreciated.
Laus.

Its really confusing when Apple calls their internal wireless card on a Mac an AirPort Extreme card......and they also market an outboard wireless router called an AirPort Extreme. See info below:
http://www.apple.com/airport-extreme/
You posted in the support community for the Apple wireless routers.....AirPort Express, AirPort Extreme and Time Capsule.
While it is possible that someone here might be able to answer your question, you will likely receive a much faster and more informated response if you post your question again in the support area for the Mac Pro.
The link to that support area is here:
Mac Pro

New airport extreme card in 2007 mac pro?

I have a 2.66 mac pro which i purchased in september 2007. I talked to one lady at the mac store in Roseville, MN and she said I needed the old airport card, which she told me is model # MA688Z/A. is this true? or can i use the newer airport extreme card? the old card is hard to find and if i can use the newer card, model # M8881LL/A, that would make my life so much easier. Please advise.

I've talked to a few more people from different mac stores, and they said that the first person i talked to basically didn't know what they were talking about. they said that the new mac pro and old mac pro both take the same airport card, model MB363Z/A. sorry for all the run-around. can anybody confirm or dis-confirm this info?

Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

Hello friends,
Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
Alternatively, whether there is some configuration tweaking I can do to get it working.
The Airport card is described in System Profiler as follows:
Wireless Card Type: Airport Extreme (0x14E4, 0x88)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
- nick

Not sure what you mean "configure by ethernet."
Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
Thx
-nick

Installing airport extreme card in a macbook pro

need help replacing the airport extreme card in my macbook pro. need details on how to do it

Without an airport extreme card, there won't be any Wifi signals going to and from the router (unless you have your machine hooked up via ethernet cable, in which case you don't need an airport card because the signal is transmitted through the cable). Most Macs have a card installed - which Mac do you have?

Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

I'm smarter now. It worked fine.

What do I need to add Airport to an early-2009 Mac Pro?

The wife's MB871LL/A. She wants to "get rid of all the wires". I'm pretty sure that just about any Apple Airport Extreme desktop card will work, but do I need to also get an antenna cable, etc.?

As far as remember, antenna cable is already installed inside of Mac Pro, so don't need anything except Airport Extreme Card.
http://guides.macrumors.com/Adding_Bluetooth_and_Wireless_to_a_Mac_Pro

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Can airport extreme connect using a mac mini. the base station is not recognized so i cannot configure it manually

can airport extreme connect using a mac mini. this airport extreme wont connect to internet via my cable modem. I cant set it to bridge mode because it doesnt appear as a base station in airport utitlity...help

First, is your AirPort Extreme Base Station (AEBS) a 802.11n, 802.11g, or 802.11b model? Second, what is your primary goal for using this base station? Finally, is the AEBS the only router in your current network configuration?

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

WinXP Home install problems on Mac Pro

Hi,
I have a brand new Mac Pro Dual 2.66GHz. It came with a second GeForce 7300GT installed. I installed additional 2x 1GB FB DIMMs. Everything worked fine, and I installed all new updates, including the new EFI Firmware update Apple introduced yesterday. After the OS X setup was complete, I downloaded BootCamp 1.1.2 and followed the instructions to create a 30GB partition for Windows XP Home. I insert the WinXP CD and let BootCamp restart the computer. WinXP boots and the blue screen appears and a bunch of drivers get loaded. After that I get the first install screen, and on that point the keyboard is not responding anymore. I can press "return" as often as I want, the install does not start. It also not responds to F3 or R as written on the screen. Its the first time Windows gets installed on this Mac Pro. I also tried to connect the keyboard directly to the computer (before it was on the cinema display hub). I tried to remove the RAM to have only the standard 1GB RAM installed. Nothing worked.
Anyone have a hint to get this done? Thanka a lot on advance!
Marty

I already thougt about that, but Apple put a note on the page:
http://www.apple.com/support/downloads/firmwarerestorationcd12.html
"Note: This CD cannot be used to return an Intel-based Macintosh computer’s firmware to a previous version if a successful update has already been performed."
So because I did a successful fimware update, I can not go back to the old firmware! There is no way back!

Airport extreme instalation on a Mac PRO

Similar Messages

Maybe you are looking for