Airport Extreme is allowing access to screen sharing, file sharing from external IP addresses (some from China, Canada etc)

How to get control over the ports/port forwarding etc in Airport Extreme?
How to make AE drop packets to certain ports from external ports. Or create whitelist/blacklists?
I figured out where the MAC filtering is! (It is inside the Timed Access Control). I wish it had a list of connected device and allowed me to select, name and add them.
I am getting requests from Chinese IP to the screen sharing ports forwarded to my iMac. Had requests to other ports as well. There was one IP address from CANADA too.
I want to open file sharing for local use only.

Why is Airport Extreme forwarding requests for screen sharing from external ip addresses to my imac? I don't have a public address, nor use dynamic dns service, and I have removed the server app (at least I think I have, but Apple Store doesn't think so).

Similar Messages

Airport Extreme N problem accessing some websites

Hello,
I just installed an Airport Extreme N base station. When I go to the following website to access documentation, it hangs. When I put my old Dlink router back in place, I can get to the website and access the documentation just fine. I have no idea whats going on. Can some of the other Airport Extreme N users access the following symantec corp documentation site?
http://www.symantec.com/business/support/documentation.jsp?language=english&view =manuals&pid=15143
When you right click and try to save the .pdf files it just downloads a 0byte file. When you try to click on the .pdf to open it, it opens with nothing.
When I take the Airport Extreme out and hook my Dlink DI-624 router in, no problems opening the document or saving to my laptop.
Any help or insight would be appreciated!

No one seems to have an answer to this one yet - have you found anything? The thread below seems to be the same issue:
http://discussions.apple.com/thread.jspa?threadID=1845115
I'll keep working at a solution and will post if I can find one.

Back to My Mac/VNC/Screen and File Sharing with a PC

Ok back to my mac is great but it doesn't work with a pc. What is the best alternative to screen and file sharing with a PC???
Thanks,

Use VNC.
On the PC.
http://www.realvnc.com/products/free/4.1/index.html
On the PocketPC
http://www.windowsfordevices.com/news/NS5673359231.html
Apple's Remote Desktop allows for VNC control through a password.
iFelix

TS4597 AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3 - It did the above steps and cannot get airport utility to allow access to the Airport extreme in order to reconfigure please help

I tried following the article's instructions by going into System Preferences / Network and changing the configure ipv6 tab to Link local only and I STILL am getting the same error. Can someone please advise how to get this ariport extreme back online and configured

I'm in a frustrating predicament with this error, so if folks have any suggestions, that would be greatly appreciated...
A few days ago my internet stopped working as best i know out of the blue (3rd gen Airport Extreme with a couple iPhones, iPad, Apple TV's, Mac's (one with Mavericks) on it). In trying to fix it, I powered down everything and reset the router. When the router is initializing (seen through the Airport utility), the internet starts working again on the Mac in which I'm running the Airport utility. (a browser in background loads a previously unloadable webpage). I'm then left with a screen where the Airport utility is waiting for me to enter set-up info:
If I leave the Airport Utility in this state and don't hit next, my internet works fine on my Mac. If I set-up this info, however, my internet no longer works (in Airport Utility the Internet globe has a orange circle saying internet disconnected) and I get a screen saying "An unexpected error occured. Try again." I've tried toggling a number of router settings, restarting the router, but nothing seems to fix it.
I've taken the router to Apple, where they were able to create a network fine with the router. I also bought a new AE router, and tried an old AE express router, but all attempts get the same error. I've also tried using the iOS Airport utility, but that doesn't seem to help. I've tried the older version (5.6) of Airport Utility run on a non-Mavericks Mac, but that didn't help.
I had a ISP technician come out, but they basically said the plug (we don't have a modem, but just a ethernet plug in our apartment) in which you're getting the internet from us is working, and it's your router. They're diagnostics said the router is 'throwing off a bunch of errors.' That being said, they've confirmed the setting on the AE are okay (as far as they know...).
Any thoughts here? I'm not especially network-proficient, but searching around has pointed me to potential issues with mavericks, IPv6, and the latest version of the Airport Utility.
I'm desperate - please help!
Much thanks in advance.

Airport Extreme (2nd gen) not seen in Finder under "shared"

Specs:
15-inch Early 2008 >Processor 2.4 GHz Intel Core 2 Duo>Memory 4 GB 667 MHz DDR2 SDRAM>Software Mac OS X Lion 10.7.5 (11G63)
Airport Extreme Second Gen with Airport Utility 7.6.1
I do not want to update to Mountain Lion again.. since the first time proved to bring with it crashing and lots of glitches. And, I only ever do totally clean installs, wiping my HD with a 3x pass in disk utility. Main problem: External HD's which used to connect to my network with the AE under the "shared" sidebar, no longer appear. Matter of fact, my Airport Extreme in general, no longer appears in the Network folder. Nor do I see the ext HD under the "Disks" tab in Airport Utilities.
The external IS formatted as HFS Journaled *extended*, and has been for a while, back to when it used to work. I'm not sure of when it stopped being recognized, but the factors that have changed since then are that I did update to ML, but soon after went back to Lion. I also recently moved, and had to set up a new network of course. I also think perhaps that the Airport Utility version changed during this time.
I've read so many support documents, forum threads *different forums* and nothing seems to point me to a working solution. The HD does indeed work, since I of course plugged it straight in to my MacBook Pro's, and it shows up on both of them. Oh, should note that the other MBP is a year newer than the one listed above. It is the first unibody model 13". Question is, why would something that was working, stop working? I'd maybe be brave enough to roll back to Snow Leopard, but I'm really positive it was also working under Lion, so I shouldn't have to.
I'd really love some help on this please. Oh, and this is NOT in order to use Time Machine. I never use it. This is simply to access redundant backup drives on the network for photos and music.
Thanks much,
Doug

I spoke too soon, sort of. While the information I got from the Sonos website is accurate, and did indeed help in getting things started, the external HD with the enclosure I bought still isn't working! I even went so far as to reformat the drive last night, even though it was already formatted correctly. Just tried a few minutes ago, and nothing... The permissions look exactly as they do on the other disks so I'm not sure of what's up. At first, I thought that maybe Apple changed something about how the Airport Extreme sees externals, such as they must meet specific network based criteria... but then I tried a several year old iOmega portable Go drive, that I hooked up via micro USB and it worked immediately.
Now I'm wondering if there really might be something to what you said, about the enclosure. Is there a precedent for such an issue? Has anybody else here experienced this? But the wacky thing is that this external with enclosure was working perfectly not too long ago. So what has changed? I moved, and set up a new network. That has changed. But aside from that? I tried earlier firmware versions, and that did nothing. So either an OS update or my enclosure is all of a sudden wonky... even though it works perfectly otherwise? VERY confusing. BTW, the enclosure is a Rosewill.
Doug

Airport Extreme used as access point. External disk does not show up in Finder

The title pretty much sums it up. I'm using my Airport as just an access point. I connected an external disk to it. The disk shows up in the Airport Utility, however I cannot connect to it because my Airport has never shown up in Finder. I went to preferences and checked Connected Servers, still no go. Any advice?

A few things to check:
The drive must be formatted in Mac OS Extended (Journaled), or FAT32
Since the USB port on the AirPort Extreme is under powered, you almost always have to use a powered USB hub when connecting a hard drive, even if the hard drive has its own power supply
When locating the disk on your Mac, open Macintosh HD or the Finder and look for the AirPort Extreme icon under the SHARED heading on the left side of the window.
Click on the AirPort Extreme icon and a folder will appear to the right representing your drive
Double click the folder to mount the drive on the desktop

Airport Extreme freezing when accessing ext HDD

My Airport Extreme keeps dropping the connections when I try to access files on the WD 3TB external HDD connected in the USB port.
I am able to connect to the internet at all times using either a newly purchased 2012 Mackbook Pro, iPad, iPhone or Windows 7 laptop. But when I try to access my files on the ext HDD, it works 1/10 of the time. I am able to access the drive and partitions, but when I select files, mostly movies (avi & mp4), it will more often then none freeze up and drop the network/internet connection. It will then indicate in the Airport utility that the Airport Extreme is no longer in range and there is no more internet until I disconnect the power from the Airport Extreme, wait a few seconds and reconnect the power. 3 minutes later the Airport Extreme is back on-line and Internet and network are restored. I have had to do this more then 8 times this morning alone.
The Airport Extreme is currently using firmware 7.6.1.
Saw many posts dating back to 2008 and have tried changing configs to recommendations, but nothing is working.
Not sure what to do to correct this, need help.

Lebruny,
Did you happen to find the cause of the freez up of you AE?.
I have mine connected to a WD 2TB, and when I heavily access the drive, I encounter the same problem you described.
Thanks,
Daddu

Airport Extreme USB Disk Access

Airport Extreme 5th Generation with a 2TB SATA drive in a powered enclosure attached via USB.
When attaching the drive/enclosure to my 2011 MBP, I can read/write to it without issues. The drive is formatted as a single NFS+ partition.
When I attach it to the Extreme via USB and then launch the Airport Utility (5.5.3) and click Manual Setup, it times out trying to retrieving the configuration settings.
The Extreme's light is green throughout this process, unless I unplug/replug the router. When it comes back up the light is flashing yellow and Airport says to connect the drive to a computer to repair it. Doing so yields the drive works fine.
If I unplug the drive from USB and re-try the Airport utility, I can immediately access the Manual Setup feature, even without rebooting the Extreme.
I've also tried the 'Configure Other' option in Airport and typing the address manually, but that does not work.
Ive read many threads similar to this, but none exactly like it and none with a definitive solution.
Thoughts/suggestions? Any other information I can provide about setup or what Im seeing?
Thanks everyone.
.sal

Assuming that you have in fact set up your AEBS correctly and that AirPort disk is enabled, you should be able to connect to it several ways. The simplest way is to launch the AirPort Disk Utility and tell it to auto-mount the drive whenever you are connected to your AEBS. If you are like me, however, and don't like to have your external hard drive mounted all the time, then you can manually mount it by navigating to "Network" in the Finder, selecting your base station, and clicking the "Connect" button. You should then be presented with a list of the hard drives connected to your AEBS which you can select from and mount.

How to configure iMac and Airport Extreme for remote access?

I want to view videos stored in iTunes on my iMac remotely over the Internet when I away from my home network. My home network setup includes AirPort Extreme with Comcast High Speed Internet Service (16Mbs/6Mbps). I use AirPlayit to support the iMac as a server and have the iPad 3 and iPhone 4 apps for AirPlayit. I have no problem viewing my videos over my home network on any of my mobile devices but for some reason I am unable to configure my firewall so that I can access my iMac remotely when I am away.

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

HT204057 I have the latest airport extreme. can not access the files.

I have previously time machine backups for two macbook pros on same drive.
However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
What am I doing wrong?

You can't access a Time Machine backup that way. Connect the drive directly, hold down the option key, and select Browse Other Backup Disks from the Time Machine menu.

Does Airport Extreme Actively Control Access?

My building shares an internet connection with an Airport Extreme serving as a router to the different floors. Someone in the building is trying to copy a file from one new-to-the-building laptop to another new-to-the-building laptop, and the connection is getting blocked. His supposition is that the Airport Extreme has flagged the laptops' traffic as potentially malicious and is actively denying them access to the network. Is it possible that the Airport Extreme is limiting the number of packets the laptops can exchange or enforcing IP leasing limitations?

No, the AirPort Extreme base station (AEBS) doesn't offer that level of control over the traffic.

How do I configure my AirPort Extreme to allow printing from my Macbook to an HP PSC 1210?

I currently have an AirPort Extreme [model A1354] connected by cable to an iMac [3.2 GHz i3 / 10.6.7]. I have an HP PSC 1210 series "All-in-one" printer attached to the USB port on the AirPort Extreme. Printing from the iMac works just fine. However, I cannot print from my Macbook [ 2.4 GHz Intel Core Duo / 10.5.8]. While the printer shows up when I go to "Add a printer", I still cannot print to the printer. When I hit print, the print window closes, but nothing prints.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Screen and file sharing problem

I can connect from my MacBook Pro to my iMac when they are both on my home network. I see it in the Finder sidebar, clicking it automatically connects to its shares, and clicking Share screen does what it's supposed to do.
But when I try to connect from the MacBook Pro from the outside world (my company's network) things don't work so well. I have Back to my Mac enabled so the iMac still shows up in the sidebar but when I click on it I eventually get an error message "Connection failed". Clicking on Connect as does nothing. Clicking on Share screen gives a generic error message.
When I connect to the iMac using "Connect to server" (Command+K) it works. I have mapped the AFP and VNC ports of my Airport Extreme base station at home so they point to the iMac.
What can I do to fix this?

I'm sure you've already checked, but have you given user access to the mini via it's sharing prefpane? Not that this will fix it - I currently have five separate macs running leopard, all with file sharing for a specific folder and guest access to those folders and it only works on 3 out of the 5 (the two that aren't working are MacPros - go figure).

How can I allow network users to use File Sharing on 10.8 Server?

I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
1:: [13/04/05 16:11:20.782] ==========================================================
0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
0:: [13/04/05 16:11:20.790] USERINFO: {
0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
0:: [13/04/05 16:11:20.790] }
0:: [13/04/05 16:11:20.790] BACKTRACE: {
0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7
0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5
0:: [13/04/05 16:11:20.790] ? | 0x105c2c866
0:: [13/04/05 16:11:20.790] ? | 0x105c2babd
0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.790] }
1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
0:: [13/04/05 16:11:20.798] BACKTRACE: {
0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66
0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.798] }
1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

Hi Gerben,
Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
Goodluck!
Jeffrey

Airport Extreme is allowing access to screen sharing, file sharing from external IP addresses (some from China, Canada etc)

Similar Messages

Maybe you are looking for