Airport Extreme keep disappearing from airport utility

Hello,
I have purchased recently an Airport Extreme and set it up as such:
- wired connection to my ADSL modem
- connected a 1TB drive by USB to the airport extreme
On top of this, I have an airport express that I use exclusively for itunes streaming to my stereo
Devices connecting to the Airport extreme are:
- one Windows XP PC (wired)
- iPhone, Ipad, Macbook Pro, all wireless
All firmware and airport utility versions are up to date.
First it works. All is connected, green lights, extreme and express detected by utility, USB drive visible everywhere. Then after a few hours, the following happens:
- extreme and express are not visible by utility on mac book pro (but still detected by utility on iPhone!)
- cannot stream music to express
- USB drive no longer visible from my Macbook pro
- shared itunes library no longer available
- green lights still on
- internet still on
The only way to fix it is to reboot the extreme.
Any ideas ?

I'm sorry to say that I've had this exact same problem. It's very frustrating because I lose the ability to stream to appletv and also to use wireless printing... the two main reasons I bought an Airport Extreme and got rid of my old router.
I will continue to have connectivity to the WAN but the airport utility on my MBP can't see any available airport devices. I thought it might be an issue with my OS, so I upgraded to Lion, but no change...
I've spent time searching the forums without success. I've also posted it to twitter. Hopefully, someone can help us? I'm wondering if the router hardware is bad or if it's a wireless driver issue with my MBP.

Similar Messages

Airport Extreme randomly disappearing from Airport Utility

Dear All,
We've got here 32 AirPort Extreme Basesations, all with firmware 7.5.2. They are setup for Radius via Server Admin and linked to the OD Master. The basestations work fine except that they drop randomly from the list of basestations in the Airport Utility. They appear to work fine however it's very frustrating that remote access gets lost from time to time. The only solution then is to go under the ceiling and restart them. The units are configured identically and have it's own hostname defined via DNS and the tickbox is on for remote access via Bonjour.
Does anybody has seen this? Especially if configured via Server Admin to authenticate via Radius?
AirPort Extreme has no console login either, that would enalbe us to remotely login and restart the device.
Thanks,
Alex

I had the same problem. I figured out what the problem was when I answered the phone while I was using the computer. My 2.4ghz phone matched the freq with the AirPort, and it killed it every time the phone was on. It took me a few months before I figured it out. Try making a call when you can see the signal meter on the computer. If you don't have a 2.4ghz phone, ask your neighbor. It could be their phone.

External Airport Extreme HD disappeared from Finder

Hi everyone,
My external HD connected to the Airport Extreme antenna has disappeared from the Finder. I have been using it yesterday night and this morning was not there anymore. In the meantime none has touched my Mac.
I have rebooted the Airport Extreme via Utility Airport with no success.
Can anyone help me, please?
Thanks,
Francesco.

FBF-CH wrote:
My external HD connected to the Airport Extreme antenna has disappeared from the Finder.
If a network drive disappears, you'll have to mount it again by hand. Do you see your AirPort Extreme in the "sidebar" of a Finder window? If so, select that to start the mount process.

My New Airport Extreme keeps disconnecting from Xbox Live, Why??

I have just lately updated my wireless router to the New Airport Extreme and it has worked great for all be one of my systems. For some reason my Xbox360(1st gen) keeps disconnecting me from Xbox Live everytime i log-in.
I'm not sure what the problem is, but what I do know is that I didn't have this problem with my old Netgear router. And No I can't change back to my old router im just hoping that these an easy fix for this problem??
Thank you!!

Hey,
I'm using an Airport Express with my xbox and having the same problem. using the xbox 360 slim, 4GB with wifi. All my other devices are totally fine.
How did you solve the issue ?
pm me at [email protected] if you like. Thanks !

My airport extreme keeps disconnecting

My airport extreme keeps disconnecting from internet. This never occurred before I changed my router to the new extreme. It seems to be a piece of ****. I Tried all the solutions posted in the forum for no avail. I'running Mavericks in an iMac 2008. Anyone found a solution ?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.

I have Airport Extreme (802.11ac), which disappears from Airport Utility

Why does it disappear? I am not further than 50 feet from AE and it flips out! AE is connected to a switch from ISP located floor below my apartment that only works if set to "Bridge Mode" on network settings tab. I am trying to use connected 1TB drive to stream movies to AppleTV that is not 50 feet away from AE. When AE disappears from Airport Utility, I still have connectivity to web via Wi-Fi, but I cannot stream from HD. Very frustrating!!!! Running MBA with all software updated. Any thoughts?

Are you running Yosemite on your MBA? If so, this may be the culprit. There are a number of posts here describing this exact issue. At present there doesn't seem to be a solution. Even the latest OS X build 10.10.1 did not seem to resolve it. One theory going around is that this may be due to a conflict between the Bonjour protocol and the AirPort Utility. Some have tried temporarily disabling their OS X software firewall which appears to work ... BUT not consistently ... nor would I recommend it.

Where did my AEBS go??? AEBS disappears from AirPort Utility

I have set up my new AirPort Base Station using the Airport Utility but once it is setup it disappears from the utility. I am able to use the AEBS as an ethernet router for my mini HOWEVER my secondary MacBook is only able to "find" the wireless signal periodically. It is not a distance problem since the two computers and the routers are in the same small bedroom!
Any suggestions to improve performance? Reliability? I am beginning to think that I was better off with my not so fast Airport Extreme. . .

Thanks for the quick response! I will not discount the idea that I made a mistake in the setup but I have not duplicated any of the names or passwords in the setup.
I also thought that maybe there could have been that type of issue so I reset the AEBS and used the Airport Utility to set up the router again (it seems like whenever I setup a router at home it takes at least two tries before I get all the steps right. . . so it was not a big deal).
After completing Airport Utility on my mini everything looked great, then without any action on my part the AEBS DISAPPEARED from Airport Utility!!! It makes sense to me that if the utility cannot see the AEBS then the MacBook is going to have problems too. . .
Any other plans of action? My partner, the MacBook user, is voting for taking the **** thing back even though I am really liking the much faster ethernet connection. . .

Airport Express connected but keeps disappearing from itunes

HI,
I have an airport express which is connected to some speakers and I'm using Airplay to stream music from Itunes to the speakers.
However the speakers keep disappearing from itunes. If I reboot the Airport Express they reappear, then have a few hours will disappear again!
In all cases I can connect to the Airport using the configuration utility and I can ping the device, so I don't think it's a problem with the Wifi, just with Airplay. Also the Airport express is only 4 meters from the Access Point.
I have two windows 7 machines, both using itunes (latest version) and a MAC - all machines have the same difficulty with the speakers intermittently disappearing.
Also on the network I have 2 x TVs and a Bowers and Wilkins Zeppelin - all working fine with Airplay.
The Airport Express is on version 7.5.2 and is using a static IP address.
Any Thoughts anyone?

Did you disconnect the cable modem's power supply before re-connecting it and then attaching the AirPort Express device? Be sure to pull the power spike—don't just use an on/off switch.
On some older cable modems, it's necessary to leave the power cable unplugged for up to 12 hours or so.

Can I use an Airport Extreme Base Station from the USA in Europe ?

A friend of mine gave me an Airport Extreme Base Station from the USA to Germany. When I hook it up to my PB by ethernet cable the Computer can't find the Base Station at all. If I use my Sonnett Aria Extreme PCI card it finds the station but in the pop-up menu asking in which country I want to use the airport station it only offers North and South American countries. How do I go from here and why is my PB not finding the station when I'm using cables ? Has it something to do with different models for different countries ? Any idea ? Thanx

Here you go ...
Changing the Radio Channel on the AEBSn
Either connect to the AEBSn's wireless network, or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Setup, check these settings:
AirPort - Wireless
o Channel: <Use Automatic or select a preferred channel>

How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
The AirPort can only share drives formatted in HFS+ or FAT32.

My new AirPort Extreme keeps shutting down and kicking my ipad and iPhoto off while sometimes showing a good connection in utilities but utilities showing no connection.

My new AirPort Extreme keeps shutting down. The status light is off. If I unplug and re-plug it comes back on and reconnects. Also, it disconnects my iPad and iPhone even though the status light is green. I go to airport utilities and the internet dot is amber and the base station is green. I check wireless clients and both iPad and iPhone show excellent connection but are not connected. If I disconnect and re-connect it restores connection. My old AirPort Extreme never had this problem. I read a couple of comments from owners with similar problems and you pushed it off on the iMac or other things. I hope you have an answer for me!

If it has power, an Extreme's status light should never be off.
Try another power outlet. If it still doesn't work, return or exchange it for a new one.

Why does my AirPort Extreme keep shutting off?

My AirPort Extreme keeps shutting off randomly can any one help?
-thanks

More experience leads me to believe the problem is with the new iMac. If I get the network going by turning AirPort Extreme power off, then on, I see a good signal at my iMac. Experience shows the network drops off after several hours. But yesterday I turned the iMac off, and the network remainded up (I could see it on my iPhone and iPad) throughout the night. That's the first time that has happened since I got the new iMac. Never had this issue with the old machine. I transferred all file to the new machine from a Time Machine backup that was up-to-date. Am working with Apple support. They had me do a re-boot of the AirPort and will call back tomorrow AM to learn it did not solve the problem, but turning off the iMac does. Darn.

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

Airport extreme not showing in airport utility

I am running osx10.7 server and am attempting to port remap my airport extreme. When i open airport utility, it says that there are no airports in range, when i'm actually connected to an airport via wifi. I cannot figure out what the issue is. If someone can help me fix this issue and instruct me how to remap my rounter so i can use it to host websites and the like, it would be greatly appreciated.
Thanks a lot for your help in advance.
Zach Russell

grimstad wrote:
My Airport Extreme is working just fine, but I want to add Airport Express. The first step in my manual says to open Airport Utility, but I get the message "Airport Utility was unable to find and AirPort wireless devices.
This may happen if your system accidentally switch the radio band.
Try this first:
Disable WiFi in the Menu Bar
Enable again
Check if the Airport Extreme shows up in Airport Utility
If so, choose the Airport Extreme
Click Manual Setup
On there:
If possible disable "Guest Network" (it cause trouble by switching constantly radio band for user convenience)
Give the 5GHz wireless a dedicated name
If you have no 802.11g (iPhone, iPod Touch) in the network:
Set radio mode to: 802.11n only (5GHz) - 802.11.n only (2.4GHz)
If you need 802.11g
Set radio mode to: 802.11n only (5GHz) - 802.11b/g
You will reach these settings by holding option key (alt) while clicking on the Radio Mode pulldown.
Click Apply and wait for the Extreme to come back
After that,
check that your 5GHz capable systems use only the 5GHz name (SSID) when joining wireless.
For that, delete the 2.4GHz name (SSID) from the list of known networks in Systems Settings - WiFi - Advanced
Move the preferd network in the List at first place.
Rejoin wireless
Lupunus
PS ... to configure the Express, best connect a laptop via Ethernet to them. This eases the process a lot.

Why does my airport express keep dissconnecting from the wifi it's extending?

Ok, so I have a airport express (latest gen) that is extending wifi from a time capsule. The problem is that at least once a day the airport disconnects from the wifi it's extending and I have to unplug it and plug it back in like 5 times before it starts working again. The error messages I keep getting from airport utility when it disconnects is "no dns server", "internet connection" and " wireless network" all with yellow circles next to them. Please help if you can. It would be greatly appreciated. Thank you.
Also, when it disconnects the light on the front flashes amber (yellow).

It's almost a miracle that it was working at all.
Each wall will absorb on average, about 15-20% of the signal so after 4 walls...and a ceiling....which is typically 2-3 time thicker than a wall....there isn't going to much signal left to extend.
Try locating the Express no more than half the distance between the Time Capsule and the general area upstairs that needs more wireless coverage. Minimize obstructions in the signal path as much as possible.
If that does not help, we'll have to do some SNR measurements to see if what you are trying to do is even feasible.

Airport Extreme keep disappearing from airport utility

Similar Messages

Maybe you are looking for