Airport Extreme keeps loosing signal

I'm pretty sure there's a couple of postings about my situation.
I have the airport extreme (white cone) connected to my Mac Mini and Macbook. I recently upgraded to the lasted updates. I noticed that my macbook keeps on loosing the signal and it wont recognized the airport extreme. After a while, it will recognize the signal and then loose it again. I have reset my airport by pressing the reset on the back of the airport extreme. I heard that i can downgrade on the airport and firmware..can you guys advice on what to do about my situation? thank you.

Change the DHCP-Lease-Time, that should help you...

Similar Messages

  • My airport extreme keeps loosing connections....

    not just to the wireless network but also to the plugged in lan, although the light stays green. Upon rebooting, everything comes back for a while but then it happens again. Is this product failing? This extreme is 2 years old.

    The BT Hub is a gateway.....a device that has both a modem and router on the same chassis. The AirPort Extreme is a router. It does not have a modem on board.
    So, your options are to use the BT Hub to provide the modem functionality for the AirPort Extreme, or if you do not want to use the BT Hub, then you will need to acquire a simple DSL modem.
    Since you must have a device to provide modem functionality "between" the wall connection and the AirPort Extreme, you might as well use the BT Hub for this purpose unless you have a specific reason not to do this.

  • Why does my AirPort Extreme keep shutting off?

    My AirPort Extreme keeps shutting off randomly can any one help?
    -thanks

    More experience leads me to believe the problem is with the new iMac.  If I get the network going by turning AirPort Extreme power off, then on, I see a good signal at my iMac. Experience shows the network drops off after several hours. But yesterday I turned the iMac off, and the network remainded up (I could see it on my iPhone and iPad) throughout the night.  That's the first time that has happened since I got the new iMac.  Never had this issue with the old machine. I transferred all file to the new machine from a Time Machine backup that was up-to-date.  Am working with Apple support. They had me do a re-boot of the AirPort and will call back tomorrow AM to learn it did not solve the problem, but turning off the iMac does.  Darn.

  • How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

    was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

    The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
    Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
    The AirPort can only share drives formatted in HFS+ or FAT32.

  • My new AirPort Extreme keeps shutting down and kicking my ipad and iPhoto off while sometimes showing a good connection in utilities but utilities showing no connection.

    My new AirPort Extreme keeps shutting down. The status light is off. If I unplug and re-plug it comes back on and reconnects. Also, it disconnects my iPad and iPhone even though the status light is green. I go to airport utilities and the internet dot is amber and the base station is green. I check wireless clients and both iPad and iPhone show excellent connection but are not connected. If I disconnect and re-connect it restores connection. My old AirPort Extreme never had this problem. I read a couple of comments from owners with similar problems and you pushed it off on the iMac or other things. I hope you have an answer for me!

    If it has power, an Extreme's status light should never be off.
    Try another power outlet. If it still doesn't work, return or exchange it for a new one.

  • My 5s keeps loosing signal , 02 say it the latest update on ios 7 causing this  , is this true and what's happening about it plz ?

    My iPhone 5s keeps loosing signal , I have contacted 02 , and they say it's to do with the latest ios 7 update , my messages and voice mail doesn't come through for a day or two after they are sent or left , this shouldn't be happening to a phone that is only a few months old !

    Think about it.  If it were truly the iOS update, EVERYONE who has updated (and that's millions and millions of users) would be having problems.  It would be front page news.
    Get a replacement SIM from O2 and see if this improves the situation.  If not, then basic troubleshooting steps are restart, reset, restore from backup and restore as new device.  If those don't work, then you have a hardware issue with the phone (not a problem with the iOS 7 update) and will need to bring it to Apple for servicing.

  • What's the range of airport extreme can the signal reach my basement my house is about 2500 sq ft

    Whats the range on the airport extreme is the signal strong enough to reach the basement of a 2500 sq ft home.  Thx

    The maximum free-space range is 150 feet; slightly more in the 5 GHz band. However, walls, floors, other electronic devices, microwave ovens, etc. will attenuate the signal reducing the range for actual use.
    I live in a 2300 SF townhome and wireless works fine from an AEBS on the second floor. I use an Airport Express on the first floor in Extend mode that is configured for my Slingplayer. Apple TV2 does not seem to have any problems. It's also on the bottom floor.
    This is a six year old home so the walls are not made of plaster. Plaster on metal lath can prevent AEBS signals from being detected outside of the room where it's located.

  • Airport express keeps loosing connection to Time Capsule

    For several years I have had no issue with mt Airport Express staying connected to my Time Capsule/router. Now 2 of my Airport Expresses keep loosing the connection and flashing yellow. I have done the resets where I press in the little button on the bottom while plugging the AE back into the power source and reconnecting through Airport Utility and that will do the trick but after a short time the flashing yellow lights will go back on.
    Would it help to turn off the router, rest all the AEs? It is so frustrating to keep loosing the connection and nothing else has changed; e.g. the AEs are all in the same place. 

    Same thing here! I didnt have the problem with airport express until I update the os from 10.6.2 to 10.6.6. I have been calling the apple support and they couldnt help (or thou sounded like they knew for that particular problem). I got from my work MacBookPro and same thing happen. I hope that apple will read this and just want to tell them that this is my 10 computer made by apple and God knows the last one! First of all they made the the fireware with the bad chipsets so I have to but extra cards and then airport. I cant connect at all to any wifi and have to put the cables on the floor from the wifi router to the ethernet input which is more than 10 metres. Apple sort this asap!!!!!!!!!!

  • My airport extreme keeps disconnecting

    My airport extreme keeps disconnecting from internet. This never occurred before I changed my router to the new extreme. It seems to be a piece of ****. I Tried all the solutions posted in the forum for no avail. I'running Mavericks in an iMac 2008. Anyone found a solution ?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.

  • I keep loosing signal on iPhone 4

    I keep loosing signal on my iPhone 4 even though I'm in a good signal area for O2. There are no faults as other people are not having the same issue. I use a case so I don't grip the phone wrong. The issue has gotten worse over the past 2 weeks. I have used another sim card and that doesent work. Does anyone have any idea what the problem could be. I look after my phone and this issue is really annoying me.

    reset the phone
    reset network setting

  • My iPhone 5 keeps loosing signal. Saying searching.....

    My iPhone 5 keeps loosing signal, goes from full signal to searching. This happens every time I got to text or make a phone call. Has anyone else have this problem? Also my texts are getting lost in cyber space for hours and people aren't  reviving them till the next day. Help?...

    Hi Lyndsay0812,
    If you are having No Service/Searching issues with your iPhone, you may find the following article helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • My NEW Airport Extreme keeps shutting down.

    My NEW Airport Extreme keeps shutting down at random intervals. No power light, not amber, green or flashing. I had to reset it four time this morning in a 10 minute span this morning. I have plugged it into the wall socket directly and now in a surge protector but still having issues. At time it just shuts down while being online. This Airport Extreme is not even three weeks home from being bought at an Apple store.

    Take the defective AirPort Extreme back to the Apple Store and exchange it for another device.

  • Airport extreme keeps dropping connection and its driving me crazy

    Alright so I have an airport extreme, and I have been having these "dropping out" problems for a long time now. For about 20 seconds, the internet signal is at maximum strength, then for some reason just completely drops for a few seconds then comes back. So basically if I am doing anything like playing a game online or talking on aim it just drops out for a few seconds then comes back. It's driving me mental.
    The airport is not far at all from my computer, and we do have 2.4ghz phones, but over at my other house, we have a linksis wireless setup, and my computer is much farther away and there are also 2.4ghz phones there, and it doesn't drop out at all.
    I have tried hard resets, changing the airport channel it's on, downgrading to previous airport versions... I know it's not my computer because it does it with both our macs in the house.
    If someone can help me fix this it would be very greatly appreciated.
    Message was edited by: Sean4258

    SOMEONE FROM APPLE PLEASE HELP US!
    Well I've got the same issues with an n (WDS Main), two extremes (1 WDS Relay and 1 WDS Remote) and 1 express (WDS Remote). The n keeps logging this (the MAC is of the WDS Relay extreme):
    Nov 02 20:27:14 Severity:5 Deauthenticating with station 00:11:24:9d:74:91 (reserved 2).
    and the WDS Relay keeps logging this (the MAC is of the WDS Main n):
    Nov 02 21:01:06 Severity:5 Deauthenticated with station 00:11:24:23:15:d4 (authentication invalidated).
    This seems to have begun with a firmware update of the n (7.2.1) and now the n constantly goes from a green status icon in AirPort Utility to an orange one and reports a WDS Error about not finding any other WDS units. Then it switches back to green. At the same time all the base stations disappear from the AirPort Utility and then come back after turning the AirPort on and off on my powerbook menu bar. Cycling the AirPort from the munu bar also restores lost internet connectivity. The actual network connectivity via the WDS network seems to stay up because I have a VOIP box attached to the WDS Remote extreme and don't loose phone service. While I'd like to get the issues reported by the n and the extremes solved at this point I'd settle for finding a way to not loose network connectivity (not the actual AirPort connection) from my PowerBook every 4 or 5 minutes. The syslog on the PowerBook shows:
    Nov 3 20:39:59 MacDaddy lookupd[4076]: lookupd (version 369.5) starting - Sat Nov 3 20:39:59 2007
    Nov 3 20:39:59 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:39:59 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:39:59 MacDaddy configd[44]: posting notification com.apple.system.config.network_change
    Nov 3 20:39:59 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:39:59 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:39:59 MacDaddy lookupd[4077]: lookupd (version 369.5) starting - Sat Nov 3 20:39:59 2007
    Nov 3 20:40:01 MacDaddy mDNSResponder: Repeated transitions for interface en1 (FE80:0000:0000:0000:020D:93FF:FE84:E333); delaying packets by 5 seconds
    Nov 3 20:40:04 MacDaddy launchd: Server 4f23 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4077]: exited abnormally: Hangup
    Nov 3 20:40:04 MacDaddy configd[44]: posting notification com.apple.system.config.network_change
    Nov 3 20:40:04 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:40:04 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 20:40:04 MacDaddy lookupd[4078]: lookupd (version 369.5) starting - Sat Nov 3 20:40:04 2007
    Nov 3 20:40:04 MacDaddy configd[44]: AppleTalk startup complete
    Nov 3 20:40:47 MacDaddy kernel[0]: in_delmulti - ignorning invalid inm (0x656e0018)
    Nov 3 20:40:47 MacDaddy natd[4080]: failed to write packet back (Can't assign requested address)
    Nov 3 20:40:47 MacDaddy launchd: Server 4f27 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4078]: exited abnormally: Hangup
    Nov 3 20:40:47 MacDaddy configd[44]: posting notification com.apple.system.config.network_change
    Nov 3 20:40:47 MacDaddy lookupd[4089]: lookupd (version 369.5) starting - Sat Nov 3 20:40:47 2007
    Nov 3 20:40:47 MacDaddy natd[4080]: failed to write packet back (Can't assign requested address)
    Nov 3 20:41:00 MacDaddy bootpd[276]: server name MacDaddy.local
    Nov 3 20:41:00 MacDaddy bootpd[276]: interface en0: ip 192.168.2.1 mask 255.255.255.0
    Nov 3 20:41:00 MacDaddy bootpd[276]: interface en1: ip 192.168.69.73 mask 255.255.255.0
    Nov 3 20:41:00 MacDaddy bootpd[276]: dhcp: re-reading lease list
    Nov 3 21:05:47 MacDaddy kernel[0]: AirPort: Link Active: "tom" - 001124068b49 - chan 8
    Nov 3 21:12:40 MacDaddy kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
    Nov 3 21:12:40 MacDaddy configd[44]: AppleTalk shutdown
    Nov 3 21:12:40 MacDaddy configd[44]: AppleTalk shutdown complete
    Nov 3 21:12:40 MacDaddy launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4089]: exited abnormally: Hangup
    Nov 3 21:12:40 MacDaddy lookupd[4204]: lookupd (version 369.5) starting - Sat Nov 3 21:12:40 2007
    Nov 3 21:12:40 MacDaddy configd[44]: posting notification com.apple.system.config.network_change
    Nov 3 21:12:40 MacDaddy launchd: Server 31ef in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4204]: exited abnormally: Hangup
    Nov 3 21:12:40 MacDaddy lookupd[4205]: lookupd (version 369.5) starting - Sat Nov 3 21:12:40 2007
    Nov 3 21:12:43 MacDaddy kernel[0]: AirPort: Link Active: "tom" - 001124068b49 - chan 8
    Nov 3 21:12:43 MacDaddy configd[44]: AppleTalk startup
    Nov 3 21:12:46 MacDaddy launchd: Server 31f3 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4205]: exited abnormally: Hangup
    Nov 3 21:12:46 MacDaddy lookupd[4209]: lookupd (version 369.5) starting - Sat Nov 3 21:12:46 2007
    Nov 3 21:12:46 MacDaddy configd[44]: posting notification com.apple.system.config.network_change
    Nov 3 21:12:46 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 21:12:46 MacDaddy named[277]: /etc/com.apple.named.conf.proxy:21: no forwarders seen; disabling forwarding
    Nov 3 21:12:46 MacDaddy launchd: Server 31f7 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4209]: exited abnormally: Hangup
    Nov 3 21:12:46 MacDaddy lookupd[4211]: lookupd (version 369.5) starting - Sat Nov 3 21:12:46 2007
    Nov 3 21:12:48 MacDaddy configd[44]: AppleTalk startup complete
    Nov 3 21:14:48 MacDaddy bootpd[276]: server name MacDaddy.local
    Nov 3 21:14:48 MacDaddy bootpd[276]: interface en0: ip 192.168.2.1 mask 255.255.255.0
    Nov 3 21:14:48 MacDaddy bootpd[276]: interface en1: ip 192.168.69.73 mask 255.255.255.0
    Nov 3 21:14:48 MacDaddy bootpd[276]: dhcp: re-reading lease list

  • How can I strenghten a weak Airport Extreme (2nd Generation) signal?

    I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away.
    Here are the details:
    AirPort Extreme 802.11n (2nd generation)
         Version: 7.6.1
         Wireless Mode: Participate in a WDS network
         Wireless Security: WPA/WPA2 Personal
         Channel: 6
         Connect Using: Ethernet
    My Airport Extreme is on the second floor of the house and is connected to a D-Link DIR 825 router that is on the first floor.
    Sometimes when I am on the second floor, I get a better signal from the D-Link router than from the Airpot Extreme.
    How can I strenghten the signal?
    Thanks in advance

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme
    Information about the device will be displayed in the area to the right
    The 3rd Generation product was the first Apple simultaneous dual band router, introduced in March 2009. Minor changes were made in the chipsets between the 3rd Generation and 4th Generation versions with some antenna improvements added in the 4th Generation versions as well. The 4th Generation version was introduced in October 2009.

  • Airport time capsule, add Airport extreme for stronger signal

    I have a new Airport Time Capsule set up and running.  My old Airport Extreme (5th gen) is sitting unused.  I'd like to hook it up because I can't get a USB drive to work off of the TC (according to posts here it requires a powered hub). 
    I've read posts about setting up more than one Extreme, but feeling overwhelmed by all the terms.  Also, much of the advice, including articles here, pre-dates the TC.  From what I've read, the version of Airport Utility makes a difference too.  I have the latest, 6.3.1.
    First question:  Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon).  A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house. 
    Here's what I'm trying to accomplish.  I live in a big old house with internal brick walls.  I want to strengthen the signal throughout the house.  One network, one password, security not a huge problem because we're rural. 
    I'm all Apple (Windows is banned from my house), and all software and OS up to date (10.8.4; I forget what cat it is). 
    Second question:  depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming?  I see these terms but am unclear on the distinctions.  I'm sure many lurkers will have the same question.  
    Thanks,
    Steve

    Hi Again.. !!
    There are two basic methods of connection.. wired by ethernet.. much the superior method to be used in every case possible.. (less gremlins!!). Even homeplug (EOP we call them here).. adapters are a better alternative to..
    Extend wireless. This is apple terminology for what everyone else calls wireless repeater.
    Wireless repeater as the name suggests.. picks up the wireless signal from a wireless source and retransmits it.. in the process it slows all transfers by half.. or more.. so it is inefficient.. only use where wire cannot be run.
    Now to your specific question.
    First question:  Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon).  A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house. 
    If the verizon router is the main router of the network.. with the TC plugged in and working in bridge mode.. then you can plug the old AE into TC or verizon router.. it will make no difference. The TC is working as a switch and AP only.. so plug into one or the other both are handled by the verizon router which does not know or care where the devices are plugged in. There is one consideration.. the TC and AE are gigabit.. the verizon is likely to be 100mbit.. so if you can plugging into the TC will provide gigabit link. Only relevant to ethernet connected computer on the AE and TC talking to each other.
    AE stand alone is useless to you.. in stand alone you connect to it but have no connection to the rest of your network or the internet.
    Second question:  depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming?  I see these terms but am unclear on the distinctions.  I'm sure many lurkers will have the same question.  
    If you connect by ethernet you set up roaming.
    See http://support.apple.com/kb/HT4260
    If by extend wireless you simply set the extend.. it is by its very nature nothing but a repeater so must use the same wireless name and password etc.

Maybe you are looking for

  • How do I find the number of physical CPUs , number of cores in OEL ?

    In RHEL , it is easy to find the number of Physical CPUs and the number of cores within each CPU -- Ouput from Red Hat Enterprise Linux 5.4 -- This a real machine. Not a VM $ cat /proc/cpuinfo processor       : 0 vendor_id       : GenuineIntel cpu fa

  • Cannot update songs in iPod

    Hi, My problem is this one: I bought an external hard drive (200 GB) I downloaded the iTunes in that external (H) drive - from Apple's site - than I transferred the songs I had in the C drive, in the H drive. I didn’t know that I should transfer the

  • Not able to send file Using FTP in SSIS 2005

    I am using SSIS 2005 I am trying to send file to ftp server using FTP task in SSIS but i am getting following error. Error Message-:An error occurred in the requested FTP operation. Detailed Description-:550 /FileName.txt: Access is denied. Remotefil

  • Charts in 9.0.2

    Is it possible to have chart types other than bar using a chart based on SQL query? In 9iAS Rel1 there was image based charts (but you could not use with SQL charts).

  • Need host string for xp  machine (oracle 10.1.1..2)

    Hi: my email address is [email protected] need host string or how to get information for host string. Thank You wayne