Airport extreme mac and Windows

Since a couple of days, my macs cannot connect to internet via my airport extreme base station anymore, but my laptop under windows still access internet through this same station. This did happen fter the last Apple security update.
Anyone any idea?
Thanks

First, welcome to the discussions.
Have a look here and see if this helps explain your problem.
http://discussions.apple.com/thread.jspa?messageID=607293
Cheers Don

Similar Messages

5th Gen Airport Extreme, XBox360 and Windows Media Center

Hi there. A similar question was posted in August 2011, but the resolution was apparently to return the 5th Gen Airport Extreme in favor of a 4th Gen Airport Extreme. Not really a solution. Here's the setup:
Upstairs
2nd Gen Airport Extreme --- (wired) --- XBox 360
{wireless signal)
downstairs
Cable connection --- (wired) --- 5th Gen Airport Extreme --- (wired) --- Win 7 PC with Windows Media Player
Wireless network is set up as 802.11n (no b/g)
Xbox can see the Intenet and XBL just fine. And on the Win 7 PC I have no problem setting up the Xbox as an extender. But when I'm on the Xbox, the Media Center app is unusably slow. Like minutes to connect and I can't even get to a menu.
What can I do? Let me know what information is useful and I'll gladly provide it. Thanks.
-P

Take a look at this like for help in setting up an AirPort Extreme Base station with Cisco VPN
http://support.apple.com/kb/HT2585
also look at HT3944 for the necessary NAT translations.

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

AirPort Extreme Drivers for Windows XP???

This may be a very silly question, but I've got a new Mac Pro that will be arriving in two days and I couldn't help but wonder, "How will the AirPort Extreme WiFi card be able to connect to the Internet when I'm running Windows XP from a separate hard drive using Boot Camp?
The Internet connection in my apartment is wireless only (coming from a router upstairs in my landlord's part of the house). Are there any AirPort Extreme drivers for Windows XP? If so, I have not been able to find anything online.
Any suggestions on how to do this?
Thanks,
~Greg

Thanks for the info Stefan,
However, I don't think that the Macintosh driver CD will do me any good in this case because I am not planning on running the 32 bit version of Windows XP. I will be installing XP64 tomorrow once my CD arrives in the mail.
I've heard of quite a few people who are currently running XP64 on their Mac Pro's, but I'm also pretty sure that the driver CD created by Boot Camp will only work in Windows XP 32-bit.
If ANYONE knows of a work around for installing macintosh drivers for my super drive and airport extreme, PLEASE let me know, because I will most certainly need to be able to use my wireless card and keyboard (especially for the CD tray)
Thanks,
Greg

Using Time Capsule with Both a Mac and Windows PC

All ... is it possible to backup both Mac and Windows computers to the same Time Capsule? My current networked devices include:
1 Windows 7 desktop (wireless/ethernet capable)
1 MacBook Air (wirelessly connected to home network)
1 New iPad (wirelessly connected to home network)
2 iPhone 4S (wirelessly connected to home network)
1 Airport Extreme (currently hardwired to my Windows 7 desktop)
Thoughts/comments on leveraging the Time Capsule as purely a backup storage solution for all the devices listed above? Is it possible? Please advise. Thanks!

I use a backup software to save backups to the TC from windows... it is no big issue.. but the TC should never get any where near close to full.. TM takes a lot of space to work efficiently.. so make sure there is still more than enough space.. since TM will do hourly incremental backups it can grow rather quickly if you do lots of big file edits on the Mac.
Hanging a USB hard disk off a windows desktop is a better solution in lots of way.. it can be formatted native windows NTFS.. and is faster than TC without adding to network bandwidth.
But the TC is great for wireless with windows laptop same as Apple side.

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

Can't Connect to Internet using AirPort Extreme Card and DLink Router

I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

dannabee, Welcome to the discussion area!
What Mac do you have?
Do you have iMac G5 or a Power Mac G5?
Did you install the AirPort Extreme card yourself?

Do I need two separate licenses to be able to use Flash Builder on Mac and Windows?

Does my Creative Cloud subscription allow me to install Flash Builder on both Mac and Windows machines?

Hi,
I know it has been a while since you replied to me. I tried it at the time and sadly it didnt work and I got frustrated and ignored it for a while. I have just tried what you suggested again and this is how it went:
• I have connected both the AX and iMac via ethernet cables to the O2 box.
• This time my iMac did detect the AX and it automatically opened the AirPort Utility window.
• I followed your instructions on the setting and connected it to my existing network etc.
• It asked to restart the AX.
• After a long wait this message appear:
"Airport Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem rejoining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
I tried this and now when I click Rescan in the AirPort utility it just says that it cannot detect any devices. And in the meantime the AX is still flashing orange.
Do you think that the AX is faulty. Although it was functioning perfectly in my previous flat. I just don't understand how one minute the iMac detects it and the next it doesn't even though the settings have been supposable successfully updated. Very frustrating.
Thanks for your time,
Louca

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

I bought an Apple Airport Extreme used and it did not come with any software disks. how would make it work without the software disk?

Bought an Apple Airport Extreme used and it did not come with any discs. Do i need any discs? or is there another way to setup this airport without using a software disc?

You can download the setup manual and software that you need.
Look on the bottom of the AirPort Extreme for the Model Number. It's A....... something.
Post back with the model number and the exact operating system you are running on your Mac or PC.

Setting up airport extreme card and airport extreme base station

I have an ibook G4 about 3 years old with osx10.4.10 recently installed. I have recently bought an airport extreme card and have also bought an airport extreme base station.
There seems to be a problem with the set up of the card. It does not seem to find any wireless networks at all, including the base station. The base station seems to be working as I went through setting this up with Apple phone support and we managed to do it by connecting the laptop to the base station with an ethernet cable.
I think the problem is with the card. I think I need to reinstall and set up the card again from scratch, but can't figure out how to do this -aiport utility and airport setup assistant don't seem to help here as they take you straight to the stage of setting up a base station. I seem to remember when I originally installed the card for the very first time (before attempting to set up the base station) that it did find other wireless networks, so I don't think there is a physical problem with the card.
Any suggestions on getting the card working appreciated.
Many thanks

Hello bblairlondon. Welcome to the Apple Discussions!
First, verify if OS X "recognizes" the card, by using the System Profiler utility. Select the AirPort Card option under Network in the column on the left. The "Wireless Card Type" should be "AirPort Extreme (nxnnnn, nxnnnn)."
If no card appears, I suggest that you double-check your AirPort Extreme Card installation by using the following Apple Tech article: iBook G4: CIP Instructions
If the card does appear, then try the following ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

Airport Extreme n and airport express ... No security ???

I have a new Airport Extreme N and two of the Airport Express ones, both using the 6.3 firmware. I can configure everything okay, all airports can be found and connected together.
My problem is that the network is open and anyone can join it ... The Extreme is configured to use WPA2 Personal but neither of the express ones are shown as using any encryption ... If I try to encrypt either of them they dissappear and I can't play my music remotely or find them in the utility.
I've tried the post that suggests removing the encryption on the extreme and then enabling the express, before finally enabling the extreme again. it didn't work ...
Any ideas what I'm doing so wrong ???

Right ... went to the Genius Bar who kind of pointed me in the right direction ... They told me however to use the old setup software ... This works fine with the express but not the extreme ... So basically use the new software.
My problem was cause by choosing the wrong option when setting up I started off aright by wetting up the extreme first with encrption enabled I was adding my express to the existing network but then choosing the next option that mentions Airtunes when I should have choosen the 'extend my network' option. This still allows you to use Airtune but doesn't say that ... The wizard then asks you to point to the base station and put in the password and then poblem solved ....... thanks for all you help ... and hope this helps someone else ..
Macbook Pro Mac OS X (10.4.8)

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

What format for my external drive allows use with Mac and Windows?

I got an external hard disk (1 tr) and i want to used it for my windows and mac, i read i can have two partitions one for mac and one for windows, but i dont really want to have two parts, and I read i can format it by fat32 and i can write and read on both os, is that true?
I want to use it for movies, os backups, and files..
Is it true that i can only save files up to 4 GB when the format is fat32?
please advise..

It this case you would need to to go to "Disk Utility" on mac and select 3 partions which will be under the Parition Layout in my screen shot below. "Current" is grayed out that will drop down select 3 partitions and make one NTFS, second Mac OS Extended, third FAT32. Using the FAT32 for both Mac and Windows but the files have to be under 4GB each.

Airport extreme mac and Windows

Similar Messages

Maybe you are looking for