Airport Extreme n: error with USB HDD; Update 5.1 crashes

Ok, seems to be a few bugs for me:
I have no Macs as yet, so operating with an old IBM T30 WinXP laptop until WWDC in June when (hopefully) Steve will announce a new MBP
1) Cannot connect to my 300Gb Maxstor external HDD, keep getting the 'disk needs repair' error with the Airport Utility. It's previously formatted to NTFS, cannot format to FAT32 as the volume is too big according to Windows....
2) I can't update the Utility to 5.1 so can't update the Firmware either. Have tried unsuccessfully to update to 5.1 but when I do, it just crashes when I try to run it so I'm stuck with v5.0 for the meantime.
Any ideas or peeps getting the same from their Windows machines ?
Most important for me is to see the external HD, it's got all my media on it.
Cheers in advance

Hi!
I've found a good tutorial that can help you format harddrives to FAT32, for volumes under 2TB. You have to download a small application called fat32format.exe, and execute it in a command prompt in Win XP. But take a look at the tutorial:
http://www.crapcontrol.com/content.php?article.14
-Martin
PC Windows XP

Similar Messages

How do I Setup USB HDD on Airport EXTREME TIME CAPSULE? USB HDD Not showing up

How can I get the HDD to work with my airport extreme? Does it need formatted a specific way for mac? Are there certain hdd types that work best with the I have a WD usb hard drive which doesn't show up when connected to airport extreme. I'm trying to setup time capsule, but Having no luck. I'm new to the Imac.
Message was edited by: clower80

A couple of pointers.
The hard drive must be specifically formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme's USB port. Check the documentation that came with the drive to find out how it is formatted at the present time.....it is likely formatted to work with Windows, which is not compatible with the AirPort Extreme.
Unfortunately, even if the drive is formatted correctly, Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme, so that will be the next hurdle to deal with.
Some users actually do seem to be able to make this work, but overall, it is not a reliable method to backup your data if it is important to you.

I own an Airport Extreme Base Station with a HDD connected. Can I copy my iTunes Library to this HDD and play it on my iPad?

Now I use Home sharing. This works well, but I have to keep my computer running with iTunes open. I like to shut down my computer.

Hans Brinker wrote:
I like to shut down my computer.
currently i know of only one way to achieve that. using FileBrowser on iPad, you can access media files stored on
a NAS
an external HD connected to an airport extreme
a time capsule

Airport Extreme 802.11ac and USB disk failure

hi,
Had an Airport Extreme 5th gen with a USB disk attached for over a year of which my Mac was using Time Machine and creating backups no problem, didnt skip a beat.
Just bought a new Airport Extreme 802.11ac, attached the same USB disk and Time Machine works once or twice then fails saying it cant find the disk. True enough if I open finder and try and find the disk its not listed.
Opening the airport utility it shows the disk attached. If I reboot the Airport Extreme the disk shows up again in finder for a short period of time.
Looks like they released a firmware update 7.7.1 which was supposed to fix this but it seems in my case it hasnt. Even factory reset after the update but no joy.
Normal wireless activities like internet access etc are fine.
Not sure if anyone else has experienced this yet? If not I guess ill try a non self powered disk or something, either that my AE is faulty.
thanks
matt

My experience with the 802.11ac extreme with 7.7.1 firmware suggests Time Machine doesn't work when the name assigned to the device (not the SSID) contains a period, which the out-of-the-box name does.
Out-of-the-box, with the default device name still assigned, I could not get Time Machine to recognize the remote disk on multiple 10.8.4 Macs until I created an empty folder on it. Yet once registered with Time Machine, backups never occurred to the disk--TM status was always "waiting". The server name displayed in TM had the period in "802.11ac" escaped with a backslash (i.e., "802\.11ac").
I renamed the extreme, but used a name that still contained a period. The same difficulty was encountered registering the disk with TM. Once registered, TM status for the disk was still "waiting".The server name again had the period escaped with a backslash.
Finally, I just removed the period from the name. Registering the disk with TM then occurred normally and backup began immediately.
(In an earlier case with the 7.7.0 firmware, I had no trouble registering and backing up to an 802.11ac Time Capsule that had previously been given a name without a period in it.)

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Neo 2 Platinum freezes while booting with USB HDD attached

This system freezes when a powered-on USB HDD is connected. I realize that the system is trying to boot off the USB device and have disabled all of the USB boot options in the BIOS. However, DISABLE USB HDD is not one of them! Is their any BIOS or other fix available for the problem?
Moe

After bios update , clear cmos with jumper onboard .
After that you must enter cmos setup and "Load optimized defaults" followed by save+exit
Sounds to me bios if looking for MBR on attached USB HDD ( didn't do this on my Neo2 with 1.C bios and external USB attached)
Set the normal boot order to
Floppy
Cdrom
HDD
Boot other devices :Disabled
(other boot order can mock things up)
Find "USB KB/Storage support" set to:Enable
Save+Exit
Boot with USB HDD attached and enter the submenu of "Harddisk boot priority" in cmos setup and all recognized HDD's
wether they are IDE/SATA/USB shall be listed , move your OS HDD witch host bootfiles/mbr to top with PGUP key and save+exit .

Airport Extreme will not show USB drive installed Solved!

Airport Extreme will not show USB drive installed Solved... At least for me!
Here's what I had to do to make it work with the newest 7.3.1 firmware.
Ready for this? No Joke Really!
1. Connect your USB drive to the Airport Extreme.
2. Turn it on.
3. Open the Airport Utility.
4. Go to Manual Setup.
5. Choose Disks and File Sharing.
Yep, we are going to set file sharing before we even see the disk we want to share!
You (I) had to set File Sharing on and Share Disks over Ethernet checked as well as set the Work Group (In my case). THEN restart the Airport Extreme.
After it re-started... My USB Drive was now present and ready for use.
I also dis-allowed Guest access. I re-started ALL computers in my network, both Windows and MAC. The USB drive held and works GREAT!
I know... Most of you thought this was a joke, It's not!
I tried everything to get the USB drive to work and failed every time just like most other people. Doing it this way worked like a charm.
Go Figure huh!
Hope this helps someone with this issue.
Message was edited by: DonaldH

How was the usb hard drive formatted? Was it NTFS, FAT32, or HFS+?

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

Does Airport Extreme work will with AT

Does Airport Extreme work will with AT&T Microcell for the iPhone 4?

The AT&T Microcell will plug into one of the Ethernet ports on your AirPort Extreme.
The AirPort Extreme will work just fine. Whether the Microcell works well is totally up to AT&T.

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

Airport extreme quit working with mac,dell etc.digital cable the issue? or?

Hi! I had luck here before, so I'm hoping I can find luck again! I'm with my folks, who run a Dell Desktop with WIndows XP Home Edition with cable modem, my Airport Extreme running wireless with my Macbook (listed) and an older than old dell notebook with a wireless card. It has been running fine for the last year.
Now, the new problem: My parents upgraded their phone to digital- so for the first week or so, every time the phone rang, I lost wireless- I presume from interference. On Monday, I was online, and was abruptly cut off. I was not able to get on again for the rest of the day. As sometimes the cable goes out- I didn't think much of it. Until the next day when I couldn't get back online, and the dell desktop could not get on either. My father called in to TW who walked him through several different solutions- none of which gave me wireless. I'm left with an old dell desktop to work on- (I'm a mac girl- I'm going insane). I need the stuff on my macbook- job applications to be sent, book writing for uploads- and my sanity back. Is it possible my Airport Extreme went? Is it the modem itself? Is it the wireless phone interference? My mac will show it can see the network- but can't connect to the internet- Any help at all will be greatfully accepted!
Thank you!!

What is the make/model of the new modem?
Since it sounds like your parents now have VoIP as their phone service, it might more likely be a bandwidth issue as opposed to a Wi-Fi interference issue that you are seeing. This would make sense since the Dell desktop is not able to connect to the Internet either.
One thing to try is to perform a complete power recycle of all the network components to see if this resolves the issue of connectivity. The simpliest method would be to first power everything off. Then, starting with the modem, power it back on; wait 10 - 15 minutes, and then, power-up the AirPort Extreme Base Station (AEBS); wait 5 - 10 minutes. Finally, power on the computers.

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

Airport Extreme n: error with USB HDD; Update 5.1 crashes

Similar Messages

Maybe you are looking for