Airport Extreme n giving 6753 error when trying to get to confi

Hello guys, I am new to the discussion, so I hope this is not a redundant question. When I try to confi my Airport Extreme n with the Airport Disk utility, I get -6753 error after a long delay. The base station has a green light, it is easily found, but I get this error. I cannot access my USB drive any longer on the Airport Extreme n. I still can see and access my wireless printer, TIVO, etc and can get on the Internet with all computers, I just can't change any confi with the software. Any help or insight into this problem would be appreciated

A Time Capsule at work was giving this exact same error after it would fail to write changes to the device via the AirPort Utility. After a phone call to Apple, they decided the device is "defective," and I should exchange it.
It would work intermittently with the error (over the two days I've messed with it), but it would often disappear from the network, etc. Taking advantage of the exchange seems like a hassle, but also like a no-brainer.

Similar Messages

Airport extreme blinking amber light error when connecting to new modem

I have just bought and installed a new modem gateway. It is an Arris TG852G DOC 3.0 model with a built in WiFi router.
After connecting it and activating it through Comcast, I reset, then reconnected my airport extreme MD0331LL/A Model No. A1408 to the new Arris
modem, I am getting blinking amber lights on the base station. I have internet connectivity, but I am still getting an amber light. My wireless devices (ipad and iphones) all see the old network name and id and seem to work just fine.
When I scanned for my airport base station in my airport utility (version 5.6.1) to try to resolve the error message I get
a message stating that the Airport Utility is not detecting any airport devices.
I cannot reset the default settings as these buttons do not work within the Airport Utility.
I suspect interference between the built in router in the Arris and I understand I need to operate it in bridge mode. Can you please help me fix this.
The COMCAST people are extremely unhelpful, and stated that this is not their problem but a problem with my router
as they have provifded me internet connectivity through the modem and the issue is my problem.

Try connecting an Ethernet cable from your computer directly to one of the LAN <-> ports on the AirPort Extreme to see if AirPort Utility can detect the AirPort Extreme that way.
If yes, click on the AirPort Extreme and then click directly on the word Status (2nd line on the summary page)
A window will open to explain why the amber light is blinking
If the message indicates that you need to configure the AirPort in Bridge Mode......
Click the Internet icon at the top of the window
Click the Internet Connection tab just below
Change the setting for Connection Sharing to Off (Bridge Mode)
Click Update at the lower right of the window to save the new setting and restart the AirPort Extreme
You can disconnect the Ethernet cable that you were using to configure the AirPort Extreme now
It would be a good idea to power off both the Arris gateway and the AirPort Extreme now
Wait a minute
Start the Arris first, and let it run a full minute
Start the AirPort Extreme next the same way
You should be all set

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

-50 error when trying to get Album Artwork onto iPod

Has anyone had the issue of getting an "unknown error" -50 when trying to sync Album Artwork? I have searched for a similar problem and have found nothing. The art work used to work on my old machine. I have recent change computers, but I moved all my music over to the new machine without any issues. Any insight would be helpful. Thanks.
DP

http://docs.info.apple.com/article.html?artnum=304996

Run Time Error when trying to get into the organizer

Does anyone know when I keep getting a run time error when I'm trying to go into the organizer and how I get it to go away?

The answer is that maybe someone does know ... but unless you give us the basic details of what you are doing, we probably can't help.
So ...
What version of PSE?
What operating system?
What is the EXACT word-for-word verbatim error you are seeing?
Does any part of PSE (like the "splash" screen) pop up before this error? If so, describe it or give us a screen capture.
Please provide all requested information.

Error when trying to get database online (intermedia)

Someone here recommended using intermedia for coldfusion hosting, and I'm relatively happy with them, but they can't offer support for the problem I"m having. I'm trying to get my mySQL database online, but I get this error:
Cannot restore database from backup 'mymindsnotrighttest.sql' (Error occurred while evaling command (errStr = [error] [2010-08-17 13:16:24] main::Imedia::HP::Mysql::
restoreDatabaseFromBackup: Cannot restore database from backup 'mymindsnotrighttest.sql' ([error] Imedia::HP::Mysql::Imedia::Admin::BackupManager::Mysql::restore: Cannot restore backup to database via command 'cat /mnt/smb/backup/mysql/mikewycklendt/mymindsnotrighttest/mymindsnotrighttest.sql | mysql --user=mysql_svc --database=mymindsnotrighttest' (exitCode=1, error=, stderr=ERROR 1064 (42000) at line 102: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'USING BTREE ) ENGINE=InnoDB DEFAULT CHARSET=latin1 ROW_FORMAT=COMPACT' at line 12 cat: write error: Broken pipe)),errCode = -1))
Everything works fine when I'm using localhost. The support guy for intermedia told me that he "reviewed your SQL File and it does not appear to have a problem" So I don't know where to go from here...

ok, I went back and made a new database but changed the character set / collation... aside from that change, everything is the same, but I get an error saying that the datasource could not be found when I can see all the tables in intermedia's phpmyadmin page... would changing the character set / collation cause this error?

Errors when trying to get a Database connection

We resolved the JSP page not found issue and now the Iview seems to be able to access the JSP page . Now we are getting a Portal runtime error when we try to access the Iview :
An exception occurred while processing a request for :
iView : pcd:portal_content/HistPerf
Component Name : ProfitAnalysis.HistoricalPerformance
invalid arguments in call.
#1.5#0007E904947000400000027600000A680003ED6C4B216995#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Error#1#/System/Server#Java###Exception ID:12:11_11/01/05_0008_4818350
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/HistPerf
Component class : jsp._sapportalsjsp_maxager
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Original exception:
     at jsp._sapportalsjsp_maxager.doContent(_sapportalsjsp_maxager.java:250)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 29 more
Caused by: java.sql.SQLException: invalid arguments in call
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:183)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.maxager.pct.profitanalysis.util.DatabaseUtilities.getConnection(DatabaseUtilities.java:103)
     at com.maxager.pct.profitanalysis.util.DatabaseUtilities.getConnection(DatabaseUtilities.java:38)
     at com.maxager.pct.profitanalysis.util.User.init(User.java:44)
     at jsp._sapportalsjsp_maxager.doContent(_sapportalsjsp_maxager.java:108)
     ... 32 more
#1.5#0007E904947000400000027800000A680003ED6C4B217317#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Info##Plain###UserAgentHook: component com.sap.portal.runtime.system.hooks.ErrorComponent supports (*, *, *) #
#1.5#0007E904947000400000027900000A680003ED6C4B217683#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Info##Plain###------PRT AbstractPortalComponent: calling doContent for portal component: com.sap.portal.runtime.system.hooks.ErrorComponent#
Can anyone offer any help on this problem ?
Thanks
Ravi

Hi Ravi,
The problem could be because of a wrong JDBC url or user id or password. Check whether the entries are the correct one.
Check out "java.sql.SQLException: invalid arguments in call" in google.
Regards,

Out of Memory Error when trying to get a BO Report as an XML

Hi,
I am trying to get a BO Report though web services API in XML format. But I am getting a OutOfMemoryError in doing so, though I am trying to get the report contents in an InputStream.
Please find the code snnipet below:
ViewSupport xmlViewSupport = new ViewSupport();
          xmlViewSupport.setOutputFormat(OutputFormatType.XML);
          xmlViewSupport.setViewType(ViewType.XML);
          xmlViewSupport.setViewMode(ViewModeType.REPORT);
          RetrieveXMLView retXMLView = new RetrieveXMLView();
          retXMLView.setViewSupport(xmlViewSupport);
          RetrieveData retBOData = new RetrieveData();
          retBOData.setRetrieveView(retXMLView);
          String[] strBORepEngURL = boSession.getAssociatedServicesURL("ReportEngine");
          ReportEngine boRepEng = null;
          DocumentInformation boDocInfo = null;
          Navigate nPage = new NavigateToLastPage();
          try
               if (strBORepEngURL.length > 0)
                    boRepEng =     ReportEngine.getInstance(boSession,strBORepEngURL[0]);
               boDocInfo = boRepEng.getDocumentInformation(boQueryDocRef,
                         fillInfo, actions, nPage, retBOData);
          catch(DSWSException exc)
               exc.printStackTrace();
          XMLView myBOView = (XMLView) boDocInfo.getView();
          InputStream inpStream = (BufferedInputStream)myBOView.getContent();
          try{
               OutputStream outStream = new FileOutputStream("C:\\abc.xml");
               outStream.write(inpStream.read());
               outStream.close();
          catch(Exception ex)
               ex.printStackTrace();
In the stack trace I find that the error is coming in this line:
boDocInfo = boRepEng.getDocumentInformation(boQueryDocRef, fillInfo, actions, nPage, retBOData);
Any inputs on this issue?
Thanks and Regards
Anshu

Hi,
The code to fill prompts before this is as follows:
String[] strBORepEngURL = boSession.getAssociatedServicesURL("ReportEngine");
               ReportEngine boRepEng = null;
               if (strBORepEngURL.length > 0)
                    boRepEng =     ReportEngine.getInstance(boSession,strBORepEngURL[0]);
               RetrieveMustFillInfo fillInfo = new RetrieveMustFillInfo();
               RetrievePromptsInfo promptInfo = new RetrievePromptsInfo();
               fillInfo.setRetrievePromptsInfo(promptInfo);
               Action[] actions = new Action[1];
               actions[0] = new Refresh();
               DocumentInformation boDocInfo =     boRepEng.getDocumentInformation(boQueryDocRef,fillInfo,actions,null,null);
               String reference=boDocInfo.getDocumentReference();
               PromptInfo[] boPromptInfo = boDocInfo.getPromptInfo();
               FillPrompts boPrompts = new FillPrompts();
               FillPrompt[] fillPromptList = new FillPrompt[boPromptInfo.length];
               fillPromptList[0] = new FillPrompt();
               fillPromptList[0].setID(boPromptInfo[0].getID());
               DiscretePromptValue[] dpv = new DiscretePromptValue[1];
               dpv[0] = new DiscretePromptValue();
               dpv[0].setValue("2009125");
               fillPromptList[0].setValues(dpv);
               boPrompts.setFillPromptList(fillPromptList);
               actions[0] = boPrompts;
Thanks and Regards
Anshu

CS6 windows extractor keeps giving me errors when trying to create a destination folder.

It gives me three error pop ups. The first says I should check my diskspace and check the destination folders write privileges. I know it is not my diskspace because I have 847 GB free. I tried running it as an administrator and saving it to program files x86, program files, my documents, desktop, C-drive, but none of them are working.
The next error that pops up is telling me to try redownloading it. I have done this and it has not worked.
The last error messege changes based on the destination i am trying to put it in.
I am running windows 8.1 on a brand new HP Envy notebook, it has a x64 bit OS with a Intel I7-4700 MQ processor. I didn't have any problems running it on my old gateway laptop, it was about 7 years old and could run it just fine but it recently died on me. It had a better OS though, Windows 7, and I am wondering if having windows 8.1 is causing a problem with this install.
Anybody have any suggestions?

The trial installer is identical to the installation files which are located at the link discussed in message #3.
Blob5 you may want to try running a trace route for the server which is hosting the CS6 files. The server in question is going to be trials2.adobe.com. This should help you determine if there is any packet loss or servers between you and the download server which may be causing your current difficulties. You can then contact your ISP so they can report the issue.

"Missing version string for product" error when trying to get updates on Lion Server

I am not getting the latest updates from Apple on my 10.7.4 server. When I attempt to do so the log has a bunch of errors stating "Missing version string for product". I've tried deleting and recreating the swupd files but I am still having the same issue. Is there any fixes to this problem I am missing? Thanks in advance!

ok, I went back and made a new database but changed the character set / collation... aside from that change, everything is the same, but I get an error saying that the datasource could not be found when I can see all the tables in intermedia's phpmyadmin page... would changing the character set / collation cause this error?

'general error' when trying to get clip from browser to viewer

I'm trying to put together a short instructional video (a kind of 'quick intro' on what a particular website is all about).
Some clips in the video consist of screen captures (made with iShowU) while others are 'live' from a firewire camcorder.
There's no problem with the camcorder clips. All going according to plan there.
However, *when I try to get the screen grab clips from the browser to the viewer (to mark in/out points, etc), I get a 'general error' message followed in quick succession by an 'out of memory' message*. (I have 8GB ram so I'm sure memory's not the issue.)
I can drag the screen grab clips from the browser directly to a sequence in the timeline, but not to the viewer.
Neither quitting FCP nor logging out (and back in again) fixes the problem. (BTW, I'm working with a PAL setup on the camera and am capturing in PAL dimensions in iShowU, if this has any relevance here.)
I'm tearing my hair out... Maybe it's something very simple that I'm doing wrong? *Any ideas on how I might get the screen grab clips from the browser to the viewer?*
TIA.
Hugh

Sounds like iShowU may be writing a less-than-valid QuickTime file.
If you can successfully drag one of these items into the timeline, I'd drag it in and then File->Export->QuickTime Movie... checking the Make Movie Self-Contained box. If this works and you have a lot of clips you might try dragging them all into a timeline and then saving them as one big movie. Sounds like they're not that long so such an approach shouldn't get you into FCP performance problems.
Another approach would be to open each movie in QuickTime and do a Save As... with the "Save as self-contained movie" option.
Either way these will probably write a MOV file that FCP will be happy with.
Good Luck!
-Joe

"Unknown error" when trying to get updates from App store...

Anyone else having trouble with the App store today? Trying to take in updates but get a "cannot be completed due to unknown error" huh? I've double/triple checked passwords etc, and they're free updates so I don't get it. Deleted apps and tried to re download, but no go..... Thoughts?
Thank you!

Hi there. I had the same issue just now. Tried twice and fortunately the apps started to update as per normal. Unfortunately, i'm not able to view my "featured" page. Hv raised the same question just now.

Getting wierd error when trying to getting phone IP address using AXL

I am current trying to use the AXL serviceability API to get phone IP
address information. I looked the developers guide and used the Java example to create a
SSL Socket connection to send the SOAP message to. The message I send is as follows:
POST: 8443/axl/ HTTP/1.0
Accept: application/soap+xml, application/dime, multipart/related, text/*
Host:localhost:8443
Authorization: Basic **************
Content-type: text/xml
SOAPAction: "http://schemas.cisco.com/ast/soap/action/#RisPort#SelectCmDevice"
Content-length: 610
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
<SelectCmDevice sequence="123456">
<CmSelectionCriteria>
<Class>Phone</Class>
<Model>255</Model>
<NodeName>10.248.140.11></NodeName>
<SelectBy>Name</SelectBy>
<MaxReturnedDevices>10</MaxReturnedDevices>
<SelectItems soapenc:arrayType="SelectItems[1]">
<Item>SEP001E4A3FAAAA</Item>
</SelectItems>
</CmSelectionCriteria>
</SelectCmDevice>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The response I get back after about 30 seconds is as follows:
HTTP/1.1 400 Invalid URI
Content-Length: 0
Date: Wed, 12 Mar 2008 19:28:43 GMT
Server: Apache-Coyote/1.1
Connection: close
Could someone point me in the right direction as to what is going wrong?
Thanks
Mitch

well, getting closer. Of course you were correct. After changing it, I now get an http 500 error after a lenghty timeout.
POST /axl/ HTTP/1.0
Accept: application/soap+xml, application/dime, multipart/related, text/*
Host:localhost:8443
Authorization: Basic ***********
Content-type: text/xml
SOAPAction: "http://schemas.cisco.com/ast/soap/action/#RisPort#SelectCmDevice"
Content-length: 610
<?xml version="1.0" encoding="utf-8"?>
http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding">
Phone
255
10.248.140.11>
Name
10
SEP001E4A3FAAAA
HTTP/1.1 500 Internal Server Error
Content-Type: text/html;charset=utf-8
Content-Length: 4566
Date: Thu, 13 Mar 2008 02:15:53 GMT
Server: Apache-Coyote/1.1
Connection: close

Error when trying to get the MBR of a georaster

Dear all
I have some georaster maps which have been uploaded and spatial indexed. However when I run the following command in 10.2.0.2 to get the minimum x MBR ordinate I get the below error message:
select sdo_geom.sdo_min_mbr_ordinate(WEB_RASTER_MAP_BNG.spatialextent, 1)
from web_raster_map_file_bng;
Error starting at line 1 in command:
select sdo_geom.sdo_min_mbr_ordinate(WEB_RASTER_MAP_BNG.spatialextent, 1)
from web_raster_map_file_bng
Error at Command Line:1 Column:37
Error report:
SQL Error: ORA-00904: "WEB_RASTER_MAP_BNG"."SPATIALEXTENT": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:Does anyone know what I am doing wrong or what is the correct way to get the MBR coordinates for a georaster object. I have no problems doing this for vector data. Eventually I will do the same for all max and min x and y for my georasters.
Kind regards
Tim

Dear Siva
Thank you for your reply. I did not know that. Although I often use an alias, as I was just figuring out how to do the query I didn't do this.
Is this the case with many of the GeoRaster related select statements? Does anyone know the reasons why this needs to be the case?
Kind regards
Tim

Keep getting an Incompatible browser error when trying to get into FAFSA.ED.GOV, says it is only compatible with Mozilla 3.5 or 3.6, what do I do?

Trying to start an application through www.fafsa.gov for college financial aid and I keep getting an incompatible browser error as I have Mozilla 8.01 and it is only compatible with 3.5 or 3.6

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Airport Extreme n giving 6753 error when trying to get to confi

Similar Messages

Maybe you are looking for