AirPort Extreme (n model) doesn't show all DHCP clients in client list.
Hi all,
Wondering if anybody can confirm or deny this occurrence. I noticed that when plugging DHCP clients into the ethernet ports, those hosts do not show up in the DHCP client list. They do appear to get a valid address and work fine, however. I still intend to test whether or not I can assign a static IP to the ethernet client MAC addresses, but I assume that will work fine as well.
In my opinion, if this is confirmed it should be addressed as a bug (albeit minor). Otherwise I'm very pleased with the new Extreme, by the way. Other issues that I don't like are more a matter of convenience than necessity.
Mike
MacBook Pro Mac OS X (10.4.8)
Ditto to all of the above, but I've got another, maybe related, question.
I have my HP printer hardwired to the router. It is set for a dynamic IP address, so the question of a static IP not showing up isn't the issue.
My problem is that I can't get the client ID to show up in the list. The MAC address is there, the IP address is there, the lease time is there. But no matter what I reset, either on the printer or on the router, I can't get the printer name to show up on the list.
If I pull up the printer in a browser window, it shows the name. I've even tried changing the name a couple of times. Nothing.
No, it doesn't really matter, it still works fine. But it's annoying to me.
Similar Messages
-
Airport extreme base station doesn't show up on network?
I just set up a wireless airport extreme base station to my PowerBook G4 and hooked my printer to it. All good. I also set up a new iPad wifi, and that also is good. I'm just wondering why the base-station doesn't show up in Finder Network? Any ideas? The Network says Neighborhood, but nothing happens or shows up, when I open it.
this did not solve my questions.
Your question was.......I'm just wondering why the base-station doesn't show up in Finder Network?
We provided answers specifying when the Extreme would and would not appear in the Finder.
As for the "why", here you are asking about design decisions that have been made by Apple. No one on a user to user forum will be able to answer for Apple. If you want to pursue this, you will need to contact Apple directly.
Looks like John Galt has it covered as far as the hard drive question. -
I need to configure Airport Extreme Base Station 802.11b/g but Airport Utility 6.3.1 will not work.
I found this page: http://support.apple.com/kb/HT5022
it recommends installing Airport Utility 5.6 which downloads as 5.6.1
but it will not install on Mountain Lion OS 10.8.5
so what to do?AirPort Utility 5.6.1 is for Snow Leopard. Use 5.6 for Lion or Mountain Lion.
You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you. -
syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help
I have the same problem with podcast playlists. When I go to the music window in my iPhone devices section, the playlists I have created on my macbook pro in iTunes do not appear as an option to sync with the iPhone. I know some web radios streams, like the BBC, won't transfer because of compatibility issues, but the playlists of podcasts that I have created consist entirely of podcasts downloaded from the podcasts section on the iTunes Music Store. They used to show up and sync properly before I upgraded to OS 5.1.1, but now they don't.
Does anyone have a fix and am I right in surmising that the cause is a glitch in OS 5.1.1? -
ICal doesn't show all text for the activity
When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?
Gabriella,
Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
View>"Make Text Smaller" is also an option for those with Eagle Eyes. -
ATV doesn't show all photos in slideshow
My ATV3 doesn't show all my photos in slideshow. It seems to repeat the same, say 50, over and over, even though I have about 400 in the folder on my windows7 PC.
Whats the fix?
Thanks
AndyFor the avoidance of doubt are you talking about the screensaver or the slideshows.
Slideshows should show all your photos, but screensavers will not. Screensavers need to save the photos to the Apple TVs flash storage, the Apple TV doesn't have a lot of this and so limits the number of photos it uses. -
Apple TV doesn't show all pictures in photo stream
I have about 1000 pictures in my photo stream, but my Apple TV doesn't show all of them. It shows only 304 photos. How can I get all my photos to my Apple TV via photo stream? I have the latest Apple TV and the latest operating system on it.
Edit:
And I have tried to reset Apple Tv and photo stream.Welcome to the Apple Community.
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device. -
HP 5550 web server doesn't show all required tabs
Good afternoon!
I have an issue with web server on hp 5550 Laserjet. Everything was good, but after reboot, it doesn't show all tabs such as "Information", "Setting", "Networking". It shows only "Home" and "Networking"...
Do someone know how to fix this issue?
Thanks in advance!
Any help will be appreciated!
IgroYour best bet would be to try Rapidweaver: www.realmacsoftware.com
Best,
Andrew
I am not very into this stuff (can't write HTML),
do you might have a suggestion for an other
WebsiteBuilder?
We can't afford GoLive (which was very cool in the
early days built by CyberStudio) nor have I time to
learn or buy the complex Dreamweaver. -
Package Body in the tree doesn't show all procedures
I am using Sql Developer 1.0.0.14.67 on Win XP Professional,
DB servers Oracle 9i on both Linux Red HAt and Win XP Professional
I have troubles with one of packages - in the tree under Package Body SQL Developer doesn't show all procedures of this package body.
On the right panel all package body source is shown, but in the tree under Package Body it shows names of only procedures up to certain line in the source code - up to line where first Private (not included in Package Spec) procedure code starts.
BUT, there are more Public procedures in package body below this Private procedure - and all of procedures below first private are not included in the tree under Package BodyI find this quite annoying. I cannot use the navigation panel on the left to find the location of all functions and procedures in the package body. The 'missing' procedures are listed under the package spec, and double clicking on them takes me to the spec and not the body.
I'm running v1.2.1.32.13. Is this a know issue and is there a fix planned? -
Ipod doesn't show all the songs listed in Itunes even after sync is complete
Ipod doesn't show all the songs listed in Itunes even after sync is complete
I'm going through the same thing, I've tried de-authorizing and re-authorizing my computer and that seems to help. I haven't gotten all my songs back yet, but I've got about 75% of it back.
-
Distiller 'default settings' blank and doesn't show all job options
We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should. Only 2 of them are showing up in the pulldown.
How can I fix this?
I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
Thanks!I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
See screenshot below:
What is the relevance of this? We seem to have the same location for the output module file.
Why does mine not work?
See screenshot below:
The Adobe Output Module is in my Startup Scripts but it still doesn't work. -
M3000: show-disks doesn't show all disk.
Hi all,
I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
So, a is disk0 1 2 3 ?
and
b is disk 0 1 2 3?
thanks
Please help
====================================================
{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
Wait for link up -
Firmware version 4.03.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present
/pci@0,600000/pci@0/pci@0/scsi@0
MPT Version 1.05, Firmware Version 1.31.00.00
Target 0
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e813d912 PhyNum 0
Target 1
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84aaf3e PhyNum 1
Target 2
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84ab082 PhyNum 2
Target 3
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e8392a42 PhyNum 3
Target 4
Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
SATA device PhyNum 4
{0} ok
{0} ok show-disks
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
c) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
{0} okHi.
It's not bug, it's a feture. :)
show-disks show available controlles, that can have connected disk.
For create alias you should manualy add what disks exactly you want use.
disk0 /pci@0,600000/pci@0/pci@0/scsi@0/disk@0
disk1 /pci@0,600000/pci@0/pci@0/scsi@0/disk@1
disk2 /pci@0,600000/pci@0/pci@0/scsi@0/disk@2
disk3 /pci@0,600000/pci@0/pci@0/scsi@0/disk@3
Generaly this aliases alredy created at POST.
Check output of devalias
Regards. -
IPhone doesn't show all music when I connect to network in iTunes
Hi
In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
Thanks
FlybridgePUSH
-
My Dock doesn't show all applications with shortcut
My Dock doesn't show all applications with shortcut
Apple tab only shows some applications on my list not all, anyone know why? I went under system settings to fix it and there is no option for it.
Thanks!Perhaps I don't understand your question, but if you think that the doc shows every application you have on the computer, this is incorrect. If you want certain applications to be shown on the dock you have to add them to the dock. The dock comes preset with a few select Applications Apple wants to feature but you are free to add others or remove ones you don't use.
Patrick -
Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)
I assume that all of your WAPs are hard wired on the network.
If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.
Maybe you are looking for
-
HI, Please tell me how I can use my ipod touch, using the selected playlist and have each song stop after it ends before going to the next? I'm a dancer, so it's hard to dj and dance at the same time. I don't want to hit pause! Thank You, Natasha
-
How to tell if program is launched from JAR?
I have a program that needs to launch itself at some point in the program. The class is called CalcSolidsWindow. The only problem is that I launch it from Eclipse to debug, and it's not in a JAR. However, I pack it into a JAR to distirbute it. To do
-
Well first of all hi, ok...im interested in buying the nano ipod, but i have recently read that it scratches easily and that the battery is too short( i mean the period of time that you use it). I would apreciatte all your answers, and opinions about
-
Grouping TV shows together OK I've ripped my lost DVD to my apple TV now how do I get all episodes to appear in one folder or heading?
-
I apologize if this has been covered but I can't find any discussion of this question. I am using Illustrator CS2; I have a page of outline shapes of a type font. I don't know, or can't remember if the outline letters were converted using the Outline