Airport extreme (n) scannen with hp psc1315

hi i have a hp all in one psc 1315 i have connected him to the airport extreme (n) and print through the network but i can not use the scanner function.
No i have read about the HP Wireless G 2101nw printer server that i can connect to the airport extreme (n ) but can i than use the scanner function on the windows and the mac-book pro

According to this document from HP, it should work.
Its name would imply that it's compatible with an 802.11g network (not 802.11n), so you would have to run your Extreme in that mode. I don't know if HP makes a similar product that is 802.11n compatible, but that would be better suited to your existing network.
Message was edited by: John Galt

Similar Messages

  • New Airport Extreme not working with my Quad Macpro

    Hi all-
    My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
    2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
    I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
    The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
    The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
    I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
    Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
    FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
    Thanks in advance.
    Lee

    I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
    - Signal Strength is between 45%-56%
    - Noise is between 24%-41%
    - Freq = 2412
    - No websites load despite it's seeing the router and saying we've joined it.
    I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
    Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
    Thanks again...

  • AirPort Extreme Base Station with Modem not recognized by airport utililty,

    My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
    How can I make it trusted again and get dial up internet to work again?

    resetting has worked for months with no return of the problem.

  • I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer.  I can connect the laptops to the printer.  Any advise?

    I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer.  I am not able to connect the laptops to the printer.  Any advise?

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • Does Airport Extreme work will with AT

    Does Airport Extreme work will with AT&T Microcell for the iPhone 4?

    The AT&T Microcell will plug into one of the Ethernet ports on your AirPort Extreme.
    The AirPort Extreme will work just fine. Whether the Microcell works well is totally up to AT&T.

  • HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

    Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

    They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
    (65132)

  • Airport extreme quit working with mac,dell etc.digital cable the issue? or?

    Hi! I had luck here before, so I'm hoping I can find luck again! I'm with my folks, who run a Dell Desktop with WIndows XP Home Edition with cable modem, my Airport Extreme running wireless with my Macbook (listed) and an older than old dell notebook with a wireless card. It has been running fine for the last year.
    Now, the new problem: My parents upgraded their phone to digital- so for the first week or so, every time the phone rang, I lost wireless- I presume from interference. On Monday, I was online, and was abruptly cut off. I was not able to get on again for the rest of the day. As sometimes the cable goes out- I didn't think much of it. Until the next day when I couldn't get back online, and the dell desktop could not get on either. My father called in to TW who walked him through several different solutions- none of which gave me wireless. I'm left with an old dell desktop to work on- (I'm a mac girl- I'm going insane). I need the stuff on my macbook- job applications to be sent, book writing for uploads- and my sanity back. Is it possible my Airport Extreme went? Is it the modem itself? Is it the wireless phone interference? My mac will show it can see the network- but can't connect to the internet- Any help at all will be greatfully accepted!
    Thank you!!

    What is the make/model of the new modem?
    Since it sounds like your parents now have VoIP as their phone service, it might more likely be a bandwidth issue as opposed to a Wi-Fi interference issue that you are seeing. This would make sense since the Dell desktop is not able to connect to the Internet either.
    One thing to try is to perform a complete power recycle of all the network components to see if this resolves the issue of connectivity. The simpliest method would be to first power everything off. Then, starting with the modem, power it back on; wait 10 - 15 minutes, and then, power-up the AirPort Extreme Base Station (AEBS); wait 5 - 10 minutes. Finally, power on the computers.

  • How can I set up the airport extreme base station with windows computer

    how can I set up the airport extreme base station with windows computer

    Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547  to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

  • I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

    I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
    office where I have a iMac 24" 2.4ghz with really fast internet
    I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
    new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
    which is in my family room and that is also where the Airport Express with iTunes was located
    now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
    internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
    +BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
    TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
    Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
    my Macbook Pro 17"
    Please help as I don't want to spend money on another 802.11n if it will not extend
    I
    Message was edited by: macman60

    So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
    Sorry but I'm not sure what this long run-on sentence is trying to say.
    You asked if the network could be wirelessly extended and that is what I replied to.

  • How to configure airport extreme to work with Actiontec gt701d modem

    I have been trying to set up a new Actiontec modem to work with a new Airport Extreme with no luck. I don't know what the right settings are to get it to work correctly. So far the only way I have been able to get the two to work together is to have the AE connect with ethernet and bridge mode. However with this configuration I can't setup a guest network which I would like to be able to do. I have read some past posts and have tried other configurations but end up either losing internet connection or getting a very slow connection. If anyone has some idea how to get this modem to work with the AE i would really appreciate some advice
    Thank you

    Welcome to the discussion area, Meagan!
    The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
    Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
    In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
    Message was edited by: Bob Timmons

  • How to configure Airport Extreme to work with Spotify

    Issue: Spotify no longer syncs Spotify files to my iMac or my iPhone despite me being a premium member. I've never had an issue with this until this past week. I can't see anything that has changed but I must be missing something. Anyhow...I'm posting this here because I need assistance with my Airport Extreme configuration (not Spotify).
    According to Spotify, I am to configure my (Airport Extreme, latest gen) router to allow the following:
    The following IP ranges should be open on port 4070:
    78.31.8.0/21
    193.182.8.0/21
    The number 21 is the prefix length.
    I've assigned the static IP to my iMac and my iPhone. I've also forwarded port 4070 (Public & Private UDP and TCP) to my iMac's static IP. I also tried it on my iPhone. What I don't know about is how to open the IP Range on that port as stated above.
    Any idea where this can be done? Thanks!

    Welcome to the discussion area, Meagan!
    The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
    Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
    In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
    Message was edited by: Bob Timmons

  • Airport Extreme 802.11n with Nortel VPN client

    Hello,
    Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
    The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

    I had the same problem and an apple apple care tech walked me through it yeterday.
    Call them, they were great.
    JK

  • New AirPort Extreme Base Station with OS X 10.3.9?

    I have an iMac running 10.3.9 along with a XP box. Can I use the new AirPort Extreme Base Station with this setup. The sys reqs seem to say that I need OS X 10.4.8. I want to use this new wireless base station with AppleTV.
    I really don't want to upgrade to 10.4.x especially since Leopard (10.5) is supposed to be coming out soon. Of course this supposes I can even run Leopard on my non-intel iMac.

    I have an iMac running 10.3.9 along with a XP box.
    Can I use the new AirPort Extreme Base Station with
    this setup. The sys reqs seem to say that I need OS X
    10.4.8. I want to use this new wireless base station
    with AppleTV.
    In order to connect to the new Airport Extreme Base Station 10.3.9 will be fine.
    In order to use Apple TV then you will need to be running 10.4.8
    I really don't want to upgrade to 10.4.x especially
    since Leopard (10.5) is supposed to be coming out
    soon. Of course this supposes I can even run Leopard
    on my non-intel iMac.
    You will be able to run 10.5 on non-Intel Macs.

  • I can't get airport extreme to work with iPad

    I can't get airport extreme to work with iPad

    Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
    In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
    Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

Maybe you are looking for