Airport Extreme N works fine but not when WDS activated

I replaced my old Airport Extreme by the new 802.11n.
Works fine with our Macbooks (pro) enabled for n.
But when I activate WDS (I'd like to use my old airport Express for airtunes sometimes), an error message appears (WDS error) in the summary, and the light flashes alternatively in green and yellow... Everything else seems to work (internet connexion), but it seems no WDS possible... If I swtich it off, everything is just fine and green...
Of course I reinitialized the base, I once used the Airport utility assistant and then manually reput my personal options. I upgraded my airport firmware to 7.1 and WDS error message is still there with the flashing light... And I tried to see if my old express would make it but nope.

I had similar issues. To roll the firmware back to an earlier version try this:
- With the option key depressed, launch the Airport Utility (located: /Applications/Utilities)
- Select your problematic extreme base station and then while holding option again, click "Continue" and then choose Manual Setup.
- It should prompt you to choose a firmware version to upload. You can select 7.0 or 7.1.
The process is a little different on PC. Let me know if this solves your problem or if you need the directions for doing this from within Windows!

Similar Messages

How do i setup my MacBook Pro to play music from Spotify or Deezer via a separate Airplay enabled speaker? I know my MacBook is Airplay enabled because i can see the icon in iTunes, which works fine, but not when general web browsing.

Airplay music from Spotify on a MacBook Pro

I would sign out again, then update your Mac (latest version, not 10.7.3 as shown in your signature), open "Settings > Mail, Contacts, Calendars" and then choose iCloud and sign in again. I would also do the same on your iOS device (sign out and in). Make sure to confirm the message when you will be asked to merge the contacts with iCloud.

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots:

Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

Install Flip4Mac which allows you to play wmv files.

TS3989 Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Videos in a shared Photo Stream can only be streamed, they cannot be downloaded.

Azure SQL database working locally but not when published to Azure

I have an
AngularJS solution that is connecting to a SQL Azure database. When
I run the solution locally, it’s configured to connect up to the SQL Azure database, the solution works fine. However,
when I publish the solution to Azure the connection to the SQL Azure database does not work.
When debugging with Chrome I get the error Failed to load resource: the server responded with a status of 500 (Internal Server
Error)
I'm not using EF. but dapper.
My connectionstring is as follows
<add name="PortalConnection" providerName="System.Data.SqlClient" connectionString="Server=tcp:xxx.database.windows.net,1433;Database=xxx;User ID="xxx";Password="xxx";Trusted_Connection=False;Encrypt=True;Connection
Timeout=30;"/>
When I run the web solution locally from Visual Studio, my sql queries runs like it should, it's only the published version having problems.
Any ideas?
Software Developer

Hi,
Thanks for answer.
I had followed that step by step guide for deploying to Windows Azure. So that was not the problem.
But I was able to get a better error message by turning off custom error in web.config.
I got the error message: "Windows login are not supported in this version of SQL Server"
I solved this by using the SqlConnectionStringBuilder instead of getting the connection string from
web.config.
So everything works great now, just think it's strange it worked locally before..
Regards
-entery
Software Developer

CR08 report published on BOEXI works fine, but not on CRS08 (JDBC conn)

CR08 report published on BOEXI works fine, but same report published on CRS08 does not work (JDBC connectivity)
The workflow is:
1 - Crystal Report was created using CR2008 using JDBC connectivity,
2 - Published on BOEXI, and
3 - Same report accessed through InfoView
Remark - the report works fine.
The very same .rpt when published on CRS 08, throws an error;
1 - Crystal Report was created using CR2008 using JDBC connectivity,
2 - Publishing it on CRS 2008, and
3 - Same report accessed through InfoView
Remark - The report does not open (Error: Failed to open the connection.... )
If the publishing of reports take place from CR08 to BOE XI and could be successfully viewed in InfoView, then why cannot the same rpt be viewed in CRS 2008 InfoView.

Moving to BOE forums.

Email @me and gmail work fine, but not from iPhoto

e-mail works fine, checked all connections, PWs etc., but not when sending photos from iPhoto; error message is :The email server didn't recognize your username/password combination. I've checked both in email accounts and reset both.

What are you settings in the iPhoto Preferences > General?
If you have set "Email photos using iPhoto", change this to "Email photos using Mail". This works more reliably.

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

ColdFusion 4.5 & Oracle 8.1.6 - Both work fine but not together!

Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.

The naldflgds is only exist in V8.0.5.
Here is what yo can try:
you only need to do the folling things.
1. copy $ORACLE_HOME/lib/libclntsh.so to CFUSN/lib
2. you need to chmod for your $ORACLE_HOME directory to allow the Coldfusion owner execute the file under $ORACLE_HOME. I don't remeber what the exaclty number need for chmod on $ORACLE_HOME, but you can try
"chmod -R 8.1.6" (if you $ORACLE_HOME=/home/oracle/app/product/8.1.6 you should cd to =/home/oracle/app/product)This should work. but this cause another seurity issue.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.
Originally posted by Richard ([email protected]):
Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
null

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server.take it bac

When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?

Where is everyone???? Does anyone have an answer???
Allik1

Airport TimeCapsule wireless works fine, but iMac can no longer find the time capsule disk for backups.

Hi,
I have a new Airport TimeCapsule that I set up about two weeks ago in combination with a new iMac running OS 10.9.4. It ran fine until 2 days ago, when the TC disk image disappeared from the iMac and Time Machine was not able to back up. I tried to find the TC in Airport Utility and it states the "Airport Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet..." I've tried restarting the time capsule. I've tried restarting everything in order (modem>TC>iMac) and the iMac still cannot see the TC disk.
I've had two other issues that I will list in case they are all related somehow:
1) The time capsule took several attempts to set up when I first bought it. I had to reset the TC several times before I got all the way through the set up process successfully.
2) I tried hooking up my printer to the USB port on the airport time capsule and although my MacBook could see it and print to it just fine, my iMac was never able to see it.
The TC is hooked up to the iMac via ethernet cable. Does any of this sound familiar to anyone? I'm about ready to send the time capsule back and just resurrect my old airport that worked flawlessly for years. This airport TC has been a huge disappointment so far.
Thanks

There are some real issues between Mavericks and TC .. (or just network bugginess!!)
There is a heap of things you can do but it is easier to just run through the whole lot in order. None is necessarily the cure and that is why doing all is important.
The list is in this thread.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule
In your case using ethernet can be a problem.. let me say please make sure you have ipv6 set to link-local only in your ethernet setup. I usually only show it in wireless but for you it must be ethernet. The wireless connection seems to be utterly required now for connection.. and hidden away into the airport utility is a switch over from wireless to ethernet. When I made the manual setup instructions above this particular ability (or stupidity) of the Airport Utility was not apparent to me.
So here is typical Airport Utility (AU) v6.. but it is actually working over wireless only. (The v5 utility was wireless + ethernet).
I have an ethernet client on the network that is completely invisible.
Click on the Other WiFi Devices (wrongly named.. it should say other devices).
And you will see the option to choose ethernet.
Then the AU sees the ethernet client and none of the wireless clients.. brilliant stuff eh??
PS this is just a test setup.. never would I have any TC with such an illegal name.. But I hope it shows you what to do.
Fix the names.. most important.. keep them short.. less than 10 characters all the better.
No spaces and pure alphanumeric.

IChat used to work fine but not any more - suggestions?

I've used iChat for about 1 year very successfully but recently video chat has stopped working. I have a MacBook Pro that doesn't work and a PowerBook where it still works fine.
Both have the same system and iChat software. Both are on the same wireless network. The Powerbook can connect to collegues and also the Apple test users (appleu3test01, 02, 03 etc.) while the MacBook Pro no longer connects although it used to connect just fine.
Symptom: I've tried having the MacBook request a conference with the PowerBook and the PowerBook never realizes that the MacBook requested a conference. When I try to initiate the conference from the PowerBook to the MacBook the MacBook never acknowledges that there has been a request. If I try to connect to appleu3test01 iChat on the MacBook displays
"Waiting for response..." for as long as I leave it the request window open.
It seems my MacBook Pro can no longer initiate nor recognize a video chat. (text chat works fine)
Given the above situation I have not tried to modify my router settings nor look into what my service provider might be doing - after all, everthing is still working great on one of my Macs.
All I have done is to try the old school Mac trick of deleting preferences. Specifically the com.apple.iChat.SubNet.plist, com.apple.iChatAgent.plist, com.apple.iChat.plist plists. That made no difference.
If anyone has any suggestions for me I would be very grateful.
Thanks in advance

I share that funny feeling but:
10.4.3 is to long ago for me to know whether it is within reach of the backward compatibility specifics of 10.4.10, the machine specifics, the routers settings and it's performance in combination with the italian provider and the policy they have towards their subscribers. Just to give an example, apparently the Powerbook does video chat, the MacBook doesn't The QT version that currently is downloadable has system requirements that ask for 10.4.9 as a minimum. And that is just a detail.
A little change to your settings could solve this, but I advice you to to a reset of your network hardware, and update them one by one to the current release versions of their hard (firmware) and software. Check the site of the ISP and router for advise on their current network mode. Write down their details, and your required input network access. Unplug the devices. Leave them a good 15 minutes to power completely down. The device that comes first in contact with the internet connection needs to be plugged in first. Wait till the lights are blinking stable, now connect your MacBook Pro direct to the Ethernet port of the Modem (?) and log in to the interface of the device by typing it's IP address into Safari. Choose easy set up, and you will be asked to input the information you have previously checked on your ISP's site. Check if the firmware corresponds with the version you looked up on their site. It probably will mention if there is new software available and it will take a minute. After the device has restarted, connectivity is confirmed. Click an internet site in safari, and walk through the network diagnostics windows to set up a stable network conform ISP advice. Now the second mac needs to start, select a site in safari, if it needs diagnostics it will ask, respond in accordance to join the network you just have set up.
Some possible trouble causes to look at as well:
Channel settings used by the american sold Extreme is not set to a number that the Italian bought Express automatically switched to as interference was eminently asking for. (Or vice versa and variations on the theme)
Encryption running on the MacBook Pro could cause the problem etc.
The MacBook Pro has an Extreme card. The Powerbook has an Express card.
The Extreme is limited to the performance of the Express now.
Check the help feature as well, open iChat, select help in the top menu.
You need to have a valid internet account, and current up to date software & firmware.
Hope it covers your issue but if it is not solved please post back: Firewall or router settings are likely to cause these problems as well. I am not very good at those.

Airport Extreme Card work fine on new Mac Pro (Early 2008)?

I was looking at this Airport Extreme Card ( http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=MTg 5Njg&fnode=home/shopmac/macaccessories/networking&nplm=M8881LL/A ). Is it simple enough to install? And does it work? I'm not a complete noob, and I have built my own PC before, but I'm wondering if there were any quirks when installing this since I'm fairly new with Mac Hardware.

You do not need to have the Extreme base station. It is possible to set up the Express to "share" the routers internet capabilities and provide it through the ethernet port thus to your computer.
You do however need to setup the Airport express to match some setting at the original base station(router). Unless your IT savvy, this could prove to be a hard task for the everyday user.
If your trying to sustain high transfer rates... wired is always the solution. I personally used a 100ft Cat-6 cable, wired up through my large apartment ceiling to give "connected" benefits to various electronics at the other end. And the cable costs less than 99 dollars
Your other option is to get what is called an extender.http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=23680 17&Sku=N100-2096&SRCCODE=GOOGLEBASE&CMP=OTC-GOOGLEBASE
This one here works on the G network, and is even a netgear product. This also costing less than the Express.
Hope this helps

Swf works solo, but not when loaded in another swf

if u wanna see for yourself how it works, create and export a font named "Century" and create an .as file that gets and sets a textfield. Anyways the first issue is, it sometimes doesn't handle it's event listeners when I test the movie, then if i retest it, it works fine. Second I tried loading this swf file into my main file but i get
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at MethodInfo-90()
at MethodInfo-82()
even if the menu file works fine on its own
here's the menu file
import com.greensock.TweenLite;
import com.greensock.easing.*;
import getSet;
var getter:getSet = new getSet();
var menu:Sprite;
init();
function init():void {
menu = initMenu();
addChild(menu);
menu.addEventListener(Event.ENTER_FRAME,float,false,0,true);
menu.x = stage.stageWidth - 61;
menu.y = stage.stageWidth/2 + menu.height/1.75;
function initMenu():Sprite {
var menuStart:Boolean = false;
var homeL:Sprite = homeLink();
var workL:Sprite = workLink();
var resumeL:Sprite = resumeLink();
var contactL:Sprite = contactLink();
var flashL:Sprite = flashLink();
var j:int = 0;
menu = new Sprite();
menu.addChild(homeL);
menu.addChild(workL);
menu.addChild(resumeL);
menu.addChild(contactL);
menu.addChild(flashL);
workL.y = homeL.y - 60;
resumeL.y = workL.y - 60;
contactL.y = resumeL.y - 60;
flashL.y = contactL.y - 60;
var homeDist:Number = homeL.y;
var workDist:Number = workL.y;
var resumeDist:Number = resumeL.y;
var contactDist:Number = contactL.y;
var flashDist:Number = flashL.y;
homeL.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
workL.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
resumeL.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
contactL.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
flashL.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
function menuRollOver(e:MouseEvent):void {
var that:Object = e.target;
e.target.graphics.lineStyle(1,0xEEEEEE);
e.target.graphics.beginFill(0xEEEEEE);
e.target.graphics.drawRect(0,0,60,60);
e.target.graphics.endFill();
if (menuStart == false) {
if (e.target.name == "instance12" && menuStart != false) {
var menuTimer2:Timer = new Timer(501,1);
menuTimer2.addEventListener("timer",startContact,false,0,true);
menuTimer2.start();
function startContact(e:TimerEvent):void {
menuTimer2.stop();
showTarget(that);
that.addEventListener(Event.ENTER_FRAME,showLink,false,0,true);
that.addEventListener(MouseEvent.ROLL_OUT,menuRollOut,false,0,true);
that.removeEventListener(MouseEvent.ROLL_OVER,menuRollOver);
menuTimer2.removeEventListener("timer",startContact);
} else {
showTarget(e.target);
e.target.addEventListener(Event.ENTER_FRAME,showLink,false,0,true);
e.target.addEventListener(MouseEvent.ROLL_OUT,menuRollOut,false,0,true);
e.target.removeEventListener(MouseEvent.ROLL_OVER,menuRollOver);
} else {
var menuTimer:Timer = new Timer(200);
menuTimer.addEventListener("timer",checkMenu,false,0,true);
menuTimer.start();
function checkMenu(e:TimerEvent):void {
if (menuStart == false) {
menuTimer.stop();
showTarget(that);
that.addEventListener(Event.ENTER_FRAME,showLink,false,0,true);
that.addEventListener(MouseEvent.ROLL_OUT,menuRollOut,false,0,true);
that.removeEventListener(MouseEvent.ROLL_OVER,menuRollOver);
menuTimer.removeEventListener("timer",checkMenu);
function menuRollOut(e:MouseEvent):void {
if (e.target.name == "instance15") {
fadeObj(e.target);
hideTarget(e.target);
var menuStartTimer:Timer = new Timer(50,1);
menuStartTimer.addEventListener("timer",equalsTrue,false,0,true);
menuStartTimer.start();
function equalsTrue(e:TimerEvent):void {
menuStart = false;
menuStartTimer.removeEventListener("timer",equalsTrue);
e.target.graphics.lineStyle(1,0xEEEEEE);
e.target.graphics.beginFill(0xFFFFFF);
e.target.graphics.drawRect(0,0,60,60);
e.target.graphics.endFill();
e.target.addEventListener(MouseEvent.ROLL_OVER,menuRollOver,false,0,true);
e.target.removeEventListener(MouseEvent.ROLL_OUT,menuRollOut);
e.target.removeEventListener(Event.ENTER_FRAME,showLink);
e.target.addEventListener(Event.ENTER_FRAME,hideLink,false,0,true);
function showLink(e:Event):void {
var amount:Number = getAmount(e.target);
var i:int = getTarget(e.target);
var curFlash:Number = flashL.y;
menuStart = true;
if (e.target.name == "instance15") {
e.target.removeEventListener(Event.ENTER_FRAME,showLink);
for (i; i < menu.numChildren; i++) {
if (menu.getChildAt(i) == e.target) {
} else {
if (curFlash >= flashDist - amount) {
menu.getChildAt(i).y -= 7;
} else {
e.target.removeEventListener(Event.ENTER_FRAME,showLink);
function hideLink(e:Event):void {
var i:int = getTarget(e.target);
var curFlash:Number = flashL.y;
var curContact:Number = contactL.y;
var curResume:Number = resumeL.y;
var curWork:Number = workL.y;
menuStart = true;
fadeObj(e.target);
if (e.target.name == "instance15") {
e.target.removeEventListener(Event.ENTER_FRAME,hideLink);
for (i; i < menu.numChildren; i++) {
if (menu.getChildAt(i) == e.target) {
} else {
if (curFlash <= flashDist) {
menu.getChildAt(i).y += 7;
if (curFlash > flashDist || curContact > contactDist || curResume > resumeDist ||
curWork > workDist) {
setDistance();
hideTarget(e.target);
e.target.removeEventListener(Event.ENTER_FRAME,hideLink);
menuStart = false;
} else if (curFlash == flashDist) {
setDistance();
hideTarget(e.target);
e.target.removeEventListener(Event.ENTER_FRAME,hideLink);
menuStart = false;
function getAmount(obj:Object):Number {
if (obj.name == "instance3") {
//trace("home");
return 94;
} else if (obj.name == "instance6") {
//trace("work");
return 63;
} else if (obj.name == "instance9") {
//trace("resume");
return 134;
} else if (obj.name == "instance12") {
//trace("contact");
return 135;
} else if (obj.name == "instance15") {
//trace("flash");
return 80;
return 4;
function getTarget(obj:Object):int {
for (var i:int = 0; i < menu.numChildren; i++) {
if (menu.getChildAt(i) == obj) {
return i;
return 8;
function setDistance():void {
homeL.y = homeDist;
workL.y = workDist;
resumeL.y = resumeDist;
contactL.y = contactDist;
flashL.y = flashDist;
function showTarget(obj:Object):void {
var i:int = getTarget(obj);
var restMenu:TextField;
var that:Object;
//if (menuStart = false
if (i == 0) {
restMenu = getRest("ome");//shows the rest of menu
} else if (i == 1) {
restMenu = getRest("ork");
} else if (i == 2) {
restMenu = getRest("esume");
} else if (i == 3) {
restMenu = getRest("ontact");
} else if (i == 4) {
restMenu = getRest("lash");
getter.menuObject = restMenu;
getter.menuObject.alpha = 0;
if (i != 3) {
TweenLite.to(getter.menuObject,1,{alpha:1});
} else {
TweenLite.to(getter.menuObject,1,{alpha:1, delay:.5, overwrite:false});
if (restMenu != null) {
if (i == 0) {
that = menu.getChildByName("instance3");
that.addChild(getter.menuObject);
} else if (i == 1) {
that = menu.getChildByName("instance6");
that.addChild(getter.menuObject);
} else if (i == 2) {
that = menu.getChildByName("instance9");
that.addChild(getter.menuObject);
} else if (i == 3) {
that = menu.getChildByName("instance12");
that.addChild(getter.menuObject);
} else if (i == 4) {
that = menu.getChildByName("instance15");
that.addChild(getter.menuObject);
function hideTarget(obj:Object):void {
var that:Object;
j++
if (getter.menuObject != null && obj.name == "instance3" && j == 4) {
that = menu.getChildByName("instance3");
that.removeChild(getter.menuObject);
j = 0;
} else if (getter.menuObject != null && obj.name == "instance6" && j == 3) {
that = menu.getChildByName("instance6");
that.removeChild(getter.menuObject);
j = 0;
} else if (getter.menuObject != null && obj.name == "instance9" && j == 2) {
that = menu.getChildByName("instance9");
that.removeChild(getter.menuObject);
j = 0;
} else if (getter.menuObject != null && obj.name == "instance12" && j == 1) {
that = menu.getChildByName("instance12");
that.removeChild(getter.menuObject);
j = 0;
} else if (getter.menuObject != null && obj.name == "instance15") {
that = menu.getChildByName("instance15");
that.removeChild(getter.menuObject);
j = 0;
function fadeObj(obj:Object):void {
TweenLite.to(getter.menuObject,.5,{alpha:0});
return menu;
function homeLink():Sprite {
var homeField:TextField = menuF("H");
var clickable:Sprite = mClickable();
var _home = new Sprite();
_home.graphics.lineStyle(1,0xEEEEEE);
_home.graphics.beginFill(0xFFFFFF);
_home.graphics.drawRect(0,0,60,60);
_home.graphics.endFill();
homeField.rotation -= 90;
_home.addChild(homeField);
homeField.y += 48;
homeField.x -= 3;
_home.buttonMode = true;
_home.addChild(clickable);
return _home;
function workLink():Sprite {
var workField:TextField = menuF("W");
var clickable:Sprite = mClickable();//square ontop of letters to be clickable
var _work = new Sprite();
_work.graphics.lineStyle(1,0xEEEEEE);
_work.graphics.beginFill(0xFFFFFF);
_work.graphics.drawRect(0,0,60,60);
_work.graphics.endFill();
workField.rotation -= 90;
_work.addChild(workField);
workField.y += 55;
workField.x -= 3;
_work.buttonMode = true;
_work.addChild(clickable);
return _work;
function resumeLink():Sprite {
var resumeField:TextField = menuF("R");
var clickable:Sprite = mClickable();
var _resume = new Sprite();
_resume.graphics.lineStyle(1,0xEEEEEE);
_resume.graphics.beginFill(0xFFFFFF);
_resume.graphics.drawRect(0,0,60,60);
_resume.graphics.endFill();
resumeField.rotation -= 90;
_resume.addChild(resumeField);
resumeField.y += 46.5;
resumeField.x -= 3;
_resume.buttonMode = true;
_resume.addChild(clickable);
return _resume;
function contactLink():Sprite {
var contactField:TextField = menuF("C");
var clickable:Sprite = mClickable();
var _contact = new Sprite();
_contact.graphics.lineStyle(1,0xEEEEEE);
_contact.graphics.beginFill(0xFFFFFF);
_contact.graphics.drawRect(0,0,60,60);
_contact.graphics.endFill();
contactField.rotation -= 90;
_contact.addChild(contactField);
contactField.y += 53;
contactField.x -= 3;
_contact.buttonMode = true;
_contact.addChild(clickable);
return _contact;
function flashLink():Sprite {
var flashField:TextField = menuF("F");
var clickable:Sprite = mClickable();
var _flash = new Sprite();
_flash.graphics.lineStyle(1,0xEEEEEE);
_flash.graphics.beginFill(0xFFFFFF);
_flash.graphics.drawRect(0,0,60,60);
_flash.graphics.endFill();
flashField.rotation -= 90;
_flash.addChild(flashField);
flashField.y += 44;
flashField.x -= 3;
_flash.buttonMode = true;
_flash.addChild(clickable);
return _flash;
function menuF(letter:String):TextField {
var mFont = new Century();
var menuFormat:TextFormat = new TextFormat();
menuFormat.font = mFont.fontName;
menuFormat.size = 50;
var menuField:TextField = new TextField();
menuField.defaultTextFormat = menuFormat;
menuField.text = letter;
menuField.height = menuField.width = 59;
menuField.embedFonts = true;
menuField.antiAliasType = AntiAliasType.ADVANCED;
menuField.selectable = false;
menuField.cacheAsBitmap = true;
return menuField;
function getRest(letter:String):TextField {
var mFont = new Century();
var menuFormat:TextFormat = new TextFormat();
menuFormat.font = mFont.fontName;
menuFormat.size = 40;
menuFormat.color = 0xFF0000;
var menuField:TextField = new TextField();
menuField.defaultTextFormat = menuFormat;
menuField.text = letter;
menuField.embedFonts = true;
menuField.antiAliasType = AntiAliasType.ADVANCED;
menuField.selectable = false;
menuField.cacheAsBitmap = true;
menuField.width = 200;
menuField.rotation -= 90;
return menuField;
function mClickable():Sprite {
var clicker:Sprite = new Sprite();
clicker.graphics.beginFill(0xFFFFFF,0);
clicker.graphics.drawRect(1,1,58,58);
clicker.graphics.endFill();
return clicker;
function float(e:Event):void {
var mouseClamped:Number = this.mouseY;
if (e.target.y <= 400) {
e.target.y = 400;
} else if (e.target.y >= 480) {
e.target.y = 480;
e.target.y += (.1 * (mouseClamped/8 - e.target.y/8));

You should not nest named functions... a source of problems waiting to happen. You should go into your Publish settings and select the Permit Debugging option in the Flash section. That could provide more specific information regarding the source of the error, such as a line number. I haven't read thru your code beyond a glance, but where you are using e.target in mouse event handler functions, you should try using e.currentTarget instead.

Airport Extreme N works fine but not when WDS activated

Similar Messages

Maybe you are looking for