Airport Extreme needs to be set-up in "Bridge mode" ??

I am trying to set-up a new intel iMac to a dsl service for my elderly uncle. The dsl people said that their system was compatable with OS 10.4.7 (which is installed) but that the Airport Extreme modem will need to be set-up in "bridge-mode." Can I do that? Where can I find instructions or help with that? When I queried "bridge mode" on this site I get lots of stuff with acronyms I don't understand and stuff about routers and wireless bridges and other stuff I don't understand... I really need help!
Flat-panel iMac, G4 tower Mac OS X (10.4) Setting up intel iMac
Flat-panel iMac, G4 tower Mac OS X (10.4)

Hi Buzz0432,
I think, "yes" - and i think i saw it in the booklet which you get with the AE. However, i'm slightly unsure about this at this instant since i'm not at home where my mac-stuff is.
i'll check on it and will report back lateron...
thomas

Similar Messages

I have FIOS and the latest version of the Airport Extreme Basestation set up in bridge mode.

OK need some technical answers I have FIOS and am forced to use their Router. I have WiFi turned off on the FIOS router and my New version Airport Exteme Basestation set up in Bridge Mode. I have CAD 5 running to all my Mac computers and a CAD 5 up to the second floor. I have an older version Airport Extreme Basestation that I would like to connect to the CAD 5 cable on the second floor where the WiFi signal is weak as the main Airport is in the basement. How would I connect the second Airport to the Airport that is in Bridge Mode? Will this setup mess up my signal strength on either CAD 5 or WiFi? I will also have one Macbook Pro plugged into the upstairs Airport. This is mainly for the WiFi for my iPad and iPhone. Details will help. Thanks.

How would I connect the second Airport to the Airport that is in Bridge Mode?
Connect from a LAN <-> port on the Bridge Mode AirPort to the WAN "O" port on the second floor AirPort and then use AirPort Utility on a Mac or iPad to set things up.
Will this setup mess up my signal strength on either CAD 5 or WiFi?
Nothing will be messed up, and you will have a much stronger WiFi signal upstairs.
If you need more details on setup.....we need to know.....
1) What model number of AirPort Extreme will be upstairs. The model number is usually embedded in the foam base on the bottom of the device. Starts with an "A" followed by four numbers. Example.....A1143.
2) What operating system you are using on your Mac, or whether you want to use the iPad for the setup...assuming that the upstairs AirPort is compatible.

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help

I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

I just purchased a new airport extreme 802.11ac I set it up and runs fine when i put my mac to sleep i come back and it can not find my airport i have to restart

I PURCHASED THE NEW AIRPORT EXTREME 802.11AC I SET IT UP AFTER I PUT MY MAC TO SLEEP I COME BACK AND IT SAYS CAN NOT FIND AIRPORT EXTREME I HAVE TO RESTART AND IT FINDS IT.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

How do I clean up my new FIOS connection?
The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

How do I set up Full Bridge Mode for port fowarding?

How do i go about setting up Full bridge mode, for port forwarding on my Airport extreme's ? I Have two working to get coverage in my house, but I guess they need to be bridged together

For most routers, including the AirPorts, bridge mode disables both the NAT & DHCP services. Since NAT is disabled, all of the firewall ports on the AirPort are open and thus port mapping/forwarding would not be reqiured. Therefore if you configure your AirPort as a bridge, the port mapping optios will not be available.
Since you have two AirPort routers, you would only need to configure the AirPort that is NOT in bridge mode for port mapping to allow communicaton coming in from the Internet. This would typically be the AirPort attached directly to the Internet.

My Time Capsule is giving me a warning that double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

My Time Capsule is giving me a warning that double NAT situation is occurring and recommends that I set it to bridge mode What is all this about please can it be explained in layman's terms and not martian thank you.

You have two devices....the Netgear and Time Capsule both configured to act as routers on the network. You only want one device providing this service.
I suggest that you configure the Time Capsule in Bridge Mode as suggested to eliminate the Double NAT error. Unfortunately, the Guest Network cannot be enabled in this setting.
No other adjustments are needed and everything else will operate normally...and the Time Capsule will still be providing your wireless network signal.
Once the Time Capsule is configured in Bridge Mode, it would be an excellent idea to perform a complete power cycle on the network to allow things to reset properly.
Just power off all devices on the network in any order that you want
Wait a minute
Start the Netgear device first, and let it run a minute by itself
Start the Time Capsule next the same way
Continue starting devices one at a time the same way until everything is powered backup
The other option you have is to "ignore" the error and the light will turn green. The Double NAT error may...or may not cause some issues for you down the line. The next time that you update the Mac operating system, or update the firmware in the Time Capsule, it may likely change the Time Capsule to Bridge Mode automatically.
If your Guest Network "disappears", you will know why this happened, and you will have to manually configure the Time Capsule again in Router Mode to provide DHCP and NAT services.
Double NAT can also cause a slow down of web page loading. You may...or may not....notice this.

Help me decide if Airport Extreme needs to be replaced or if it is a setting

I have a wireless network consisting of Airport Extreme 802.11n set up as "create a wireless network" that goes to two Airport Expresses. One is connected via ethernet because we have a stucco house and it is in the room above the garage. The other is connected to the network wirelessly and brings a better signal to the upstairs.
When I connect directly to my DSL modem wirelessly (it has that capability) I have speeds of 2.8 Mbps. When I connect thur my Airport, it's all over the map, but never above 1.5 Mbps. Randomly it will drop to .2 or .5 and stay there for hours.
Here are my settings:
I tried changing the channel. I have not reset it because I am unclear if a hard reset is necessary and, frankly, I can't remember all the steps I would need to perform to get it all up and running again.
My DSL guy who knows nothing of apple said it sounds like it's dying. Other info you may need is that DSL come in thru Netgear 7550 modem that has wireless capabilities. It used to be turned off until today, so interference with that is unlikely since it was turned off.

Should I just hard reset them all and start over and see if that helps? If so, how long would it take to get it all set up the right way again. I remember when I did this a year or two ago it took a LONG time to get it right.
I read in other airport posts that having it in Bridge Mode can "flood" something or rather (no idea what it meant). But can I change that setting and still have my express function they way they are now to create my wireless network all around our house? I'm afraid to try it, lest I screw everything up.
Please help!
thanks

Airport Utility for my Airport Extreme needs to be changed to a different computer, because the current computer is down permanently.. How do I do this? Do I have to reset the Airport Extreme and start from scratch?

The computer (Win XP) on which the Airport Utility has been set up for the past few years is no longer accessible, so I need to set it up on a different computer. Can I do that with my exisitng wireless network, or will I have to set up a new network from scratch, once I have installed Airport Utility on the new machine?

You can install AirPort Utility on either a Mac or PC, but there would be no reason to make any changes to your existing configuration on the AirPort Extreme unless you need to do so.
Download files are here:
http://support.apple.com/downloads/#airport

On the new airport extreme how do you set up a print thats plugged in to the base station to work on all computer

I pluged in a printer to my new airport extreme and need to set it up so other computers can see it

Plugged is very unspecific.. ethernet and USB are possible and completely and totally different.
If you need help.. we need to know what the printer is.. and using what connection.
Did you read the apple setup guides.
Printer setup.ML
USB and Ethernet.
http://support.apple.com/kb/PH10875
Wireless
http://support.apple.com/kb/PH11387
IP printer without drivers
http://support.apple.com/kb/PH11478
Troubleshoot network printer
http://support.apple.com/kb/PH11070

Problem with lacie HD and airport extreme need help!!

Let me first off tell you what my set up is powerbook with the latest 10.4 os, airport extreme software up to date, a Lacie 500gb usb hard disk connected to the airport extreme, i've got an apple TV connected to the extreme via ethernet, I also have a macbook pro using the airport.
The problem i've got is the powerbook is the main hub between the external hard disk and the apple tv but it's started to not hold a connection to the lacie i keep having to tell the powerbook to connect then ok it with a password and as a result i have to keep re syncing things like movies and photos to the apple tv.
Is there a way to automatically connect the powerbook to the hard disk with out it needing a password if not can anyone come up with an explanation as to why the disk has started to unmount after being fine for weeks?
My macbook pro has no problems keeping a connection.
Thanks in advance

I just found out something today which might help you Daniel, but that doesn't solve our problem in a "classic" way...
So I was very obsessed by the fact that Windows Vista could actually access the shared HD with Bonjour and with a lot of testing I found this : let's say my macbook pro was off, if I would access the HD with Vista and then open up the MacBook Pro, then there would be no problem.
Eventually I found out that the problem really came from the fact that my WD MyBook 1Tb external drive was putting itself on standby after a while (which is a good thing actualy). When I was trying to connect to the drive while it was on standby with Finder, it would try to connect forever... however, it would physically wake up the external drive (I could tell by the sound)... but too late for Finder, and no way to access it other than rebooting the Mac... OR crashing Finder (Apple Menu - Force to quit). Then the Finder restarts automatically and the drive works.
I really don't like this solution (having to crash finder) but it works.
PLEASE if someone has a better way, let me know !!!

Airport Extreme Needs Daily Reboot to re-enable Wifi

All,
I bought an Airport Extreme in Nov 2014, firmware 7.7.3 in Bridge mode acting as an AP, my network consists of a 24port gig dell switch a Sonicwall TZ-210W (wireless off) and a windows 2008R2 file server also used for DHCP, DNS etc.
I have issues where my airport will stop letting certain devices on the network via wifi. I will get on my phone and it will be connected (iphone 6), get on the wifes macbook air, it will be working (sometimes), have my laptop from work that was connected fine 12hrs ago not get connected, my ipad (3rd gen) will not connect to the network, but my imac that is hardwired (connected directly to the airport (using as a switch for my imac) ) will connect just fine, but i can reboot any of the devices it seems like the ones that had a connection continue working but new ones will not or even if they were new in the past 12 hrs... All i have to do to get all of them online is to restart the base station (airport) I typically do that from my mac using the airport utility once it comes back up all of the devices previously working or not reconnect automatically and start working fine.
What I have tried...
1. Reset to defaults and re-setup Still fails
2. tried setting the channels static after using the wifi utility in my imac to see what channels would work best. still fails
3. i have tried moving it to different locations in my house - no luck still fails
4. i would try different firmware, but haven't seen any others avail.
5. searched forums saw posts of people a couple years ago with the previous version had similar issues and it was firmware related - No Luck
6. thought about sending home with a co-worker let them run it for a while, but number of devices etc. could be a cause. I probably have 40ish devices max on my network wired/wireless.
Do I have a lemmon? Can anyone give me other options? or do I need to have this replaced..

So just an update to anyone with similar issues. After posting my initial issue here and seeing John's reply I contacted Apple, and here is what they had me do and I have not had to restart my AirPort in a week now.
So I called them explained what I had going on at first the tech was a bit puzzled at why I would be having these odd symptoms, but we walked through each page in the Airport Utility on from my iMac and the only setting that he thought looked a little odd was that I had WPA/WPA2 Personal enabled as my wireless preference. He asked why I responded and told him because I had some family members that had older devices that were not compatible with WPA2 so I enabled rev 1 as well. So seeing that this was the only setting that looked odd he had me do a full factory reset, now I thought I had done this via software, but it turns out there are a couple different ways and the software way doesn't do it completely.
Doing a Factory Reset.
1. Unplug and disable wireless on any Mac that had used the airport utility to connect to the airport. (we did this because we wanted to make sure nothing pushed old settings into the airport.)
2. unplug power from the device. ( i found it was much easier todo this at the wall as you will need two hands in the next step.)
3. Find a paperclip or a tack that you can push the little button on the back of the airport in.
4. Push the tack or paperclip into the reset hole in the back of the device. (right next to the power connector, it was easier to jack into the wall than plug power at the airport while holding the reset button next to the power connector.)
5. Continue to hold the button until the unit boots and starts flashing orange, let it flash orange for 5-10sec then let go, it should continue to flash orange for a bit then go solid.
6. Once the light stops blinking you should be able to see this in an iOS device, he recommended doing the setup via an iPad or iPhone as it is a very streamlined and simple setup.
7. I then set my password and my wireless name etc. let it do the security on its own and that was that.
Like I said after doing that I have had no issues. Seems a bit strange to me that it would be the WPA option as if the option is there in my mind it should work fine or it should be removed. Anyway if this helps you out please post it, kinda wonder how many others have a similar issue...

Setup Guest Network with OS X Server and Airport Extreme - NEED HELP!

Hi All,
So I have a small business with a Mac Mini Server (10.6.5) and an Airport Extreme. The Airport is handling the routing and DHCP duties, while the Server is handling the DNS. The Airport is pointed to pull DNS from the Server. All internal systems work great accessing the internet and folders on the Server.
I need to setup a Guest network for internet access, so I turned this function on in the Airport Extreme. It sets up fine, but if you connect to that new Guest Network the system hangs trying to open a web page. My thinking is since the Server is the one handling the DNS it is not working for Guest computers since they are not part of our internal network. At least that is my theory, I could be wrong.
With this type of setup what do I need to modify to get this working? Anyone have any ideas?

After trying for days to figure this out I was finally able to get a working solution and I now have my APE providing a guest and main network while using my lion server as the Dsn server for the main network.
The setup is a bit of a hack and does require you to have at least two devices with staticly assigned ip information on the main network but it does allow you to serve dhcp for both networks from the server and make some services available to the guest network such as iTunes remote for parties.
1) delete your custom Dns entries from the Internet settings in the APE and set two dhcp reservations for .2 and .3 (in this case my Mac mini server and my airport express)
2) reduce the dhcp range to only have 2 available IPs (10.0.1.2-10.0.1.3) and save settings
3) on a computer connected to the main network install wireshark and begin sniffing for packets. Connect at least one device to your guest network and look for any packets that have an ip from your guest network (usually 172.16.42.x) once you capture one of these packets expand the vlan information. This should list a vlan ID ( in my case this was 1003. I would suspect this is universal but do not know)
4) on your server open network preferences, click the gear at the bottom and click "manage virtual interfaces", add a vlan that matches the vlan ID from above. Click ok and apply your settings. The vlan interface should get an ip in the guest network range from your APE.
* if you are running lion you will need to install server admin tools before proceeding*
5) open server admin and add the dhcp service. Create an entry for your primary network (ex: 10.0.1.x) make the dhcp range one higher than the settings in step 2 ( ie: 10.0.1.4 to 10.0.1.253) assign this to the physical interface. Make sure this entry has your internal DNA servers
6) add another entry for the guest networks ip range (ex: 172.16.42.x) again set it one ip higher than step 2 ( 172.16.42.4 to 172.16.42.253) save and activate both ranges. Assign this range to the vlan interface. Make sure this entry either contains your isps dns servers or another public dns server. Turn on dhcp.
Because you have now assigned the only two addresses in the APEs pool for your primary network to static entries there will not be any addresses to assign and the APE will not respond to requests. This will allow your server to pick up the work of assigning IPs. As for your guest network, the APE will assign IPs for two host and then stop. Your clients may either get an IP from the APE or the osx server so both should have the same info. Just make sure the two static clients on your main network have the local DNA servers entered manually.

External Drive connected to Airport Extreme, need Time Machine 3 Mac's Help

I own an Airport Extreme and just recently added two new Macs with the Time Machine feature to our household. I would like to use Time Machine to backup to my Airport Extreme that has a 500 GB hard drive connected. It seems Apple has this blocked since they have released the Time Capsule version of the router. Is there a work around this feature so I don't have to go out an purchase what I basically have already got? Please help. We would like to upgrade our older macs to Leopard and us the same system to back them up as well. Please advise. Thank you.

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

I am upgrading wi-fi router from Airport Express to Airport Extreme. I followed set up instructions yet I am still getting the flashing amber light and cannot setup (using manual setup or the continue button). What should I do??

Hello,
I am upgrading my wireless router from an Airport Express to an Airport Extreme. After disconnecting the Express and plugging the Extreme via ethernet cable to the modem, I am receiving a flashing amber light after connecting the power source. I also reset the modem while the Extreme was still powered and plugged into the modem, but no luck. I also tried resetting the modem and the Extreme and still no resolution. Please advise. Thank you!

This error usually occurs when the Windows Firewall and/or anti-virus software blocks the connection attempt from the PC to the AirPort Extreme.
Microsoft Security Essentials can do the same thing.
Things would be much easier if you had a Mac or iPhone or iPad to set up the AirPort Extreme. Otherwise try turning off the Windows Firewall and Anti-Virus programs, etc on the PC.
Restart the PC, then see if the PC can contact the AiPort Extreme. It will likely help to connect an Ethernet cable from the PC to one of the LAN <-> ports on the AirPort Extreme. You can disconnect the Ethernet cable once the AirPort Extreme has been configured.
Re-enable the Windows Firewall, Anti-Virus, etc and restart the PC.

Airport Extreme needs to be set-up in "Bridge mode" ??

Similar Messages

Maybe you are looking for