Airport Extreme (New) - Is it possible to turn off 2.4ghz broadcast?

I've got a new Airport Extreme (MC340b/a) and I can't figure out a way to turn off the 2.4 ghz signal, so it's *only* broadcasting on 5ghz.  I've held the option key down when selecting radio mode but none of the options appear to allow me to do this.  No matter which setting I choose, the airport extreme always broadcasts a 2.4ghz signal as well as a 5ghz one.  I know the older AE's, which were dual band but not simultaneous, allowed you to switch to being either 2.4ghz o4 5ghz.
I want to turn off the 2.4ghz as it's interfering with a number of other radio devices.
Does anyone know if this is possible please?
Many thanks

Really?  It seems crazy that functionality that was present in Apple's older dual band airport extreme, is not present in the simultaneous dual band version.   I can set the router so it broadcasts 2.4ghz only if I wish, why not 5ghz?  It just makes no sense.

Similar Messages

  • I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
    Sorry, but no.
    Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
    Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

  • Is it possible to turn off the sound and just vibrate for incoming email?

    Is it possible to turn off the sound on my Verizon iPhone 4 and just have it vibrate for incoming email. Can't seem to find any way to do this!

    You could either flip the mute switch or go to Settings > Sounds > New Mail = Off

  • I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone

    I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone as my icloud password is incorrect.  I have reset this several times and also cleared cookies history etc.  none of the above makes a difference.  Any ideas?

    The ONLY thing you can do to turn off Find My iPhone is to have the correct password. There is no way around it. You can get help with the password: If you forgot your Apple ID password
    If none of those methods are possible: Apple ID: Contacting Apple for help with Apple ID account security

  • Is it possible to turn off a channel in DAQ?

    I am using 4*PXI-6070E to acquire 64 channels simultanously. Is it possible to turn off one or several channels during acquisition? Which function or property node should I use? I have tried using property node "disable" in waveform graph but it seems didn't work. That channel is still running and the data is still here. Can anyone help me plz? THX a lot!

    Once a set of channels are configured in a task and being acquired, you cannot reconfigure the task (add/remove channels) without stopping the running task
    What you could do is to: Use array functions ( like index array) to create a subset of channels you require, from the set of channels being acquired

  • Is it possible to turn off a spot colour

    Hello
    Probably a dumb question but I will ask anyway. Is it possible to turn off a spot colour in CS4. I can effectively do it by creating a spot white and merging the spot colour I want to delete to the spot white using the ink aliasing. However, this leaves a spot colour in the high res pdf at th end of the job. This then causes a problem as we use an online proofing system which then fails the flightcheck as there is a spot colour in the pdf.
    Cheers
    Beeefcake

    The spot colour is used so that we can perform a find on any text with a fill of the spot colour and delete it. The spot colour is put in for this purpose when the original artwork is created in the US.
    Kathlene - I can't believe I didn't spot that! This would work! We could just convert the swatch to 0% cmyk as you suggest. The majority of the pages in the catalogue are on a white background so the pricing would simply disappear resulting in no spot place when pdf's are made. There are some pages on a coloured background but these are very few and the pricing could be deleted manually.
    Thanks for the help!
    Beefcake

  • Camileo S20 - Is it possible to turn off the screen?

    Is it possible to turn off the screen when using Time Lapse or Motion Detection modes so as to save power?

    Hi buddy,
    I have downloaded the user manual off Camileo S20 and searched a little bit but unfortunately I can find no informations about turning off the screen when using Time Lapse or Motion Detection. It seems that the screen is always on.
    But you can connect the AC adaptor while recording movies. So you have always power. :)

  • I was downloading some new apps on my new iphone 5s that it turned off , I tried to restore it , but I couldn't

    I was downloading some new apps on my new iphone 5s that it turned off , I tried to restore it , but I couldn't

    Try:
    Broken headphone jack! 3.5mm dillemma....: Apple Support Communities

  • Is it possible to turn off the Apple dock completely?

    I was wondering if it was possible to turn off the Apple dock completely without causing irreparable damage to my system. I am considering using Drag Thing, but when I am using it the functionality seems redundant with the Apple dock, also using both programs in tandem uses up more precious memory. The Drag Thing website links to the following tutorial as a solution:
    http://www.creativemac.com/2003/02_feb/tutorials/dockdead2030225.htm
    But it was published a long time ago, and I don't want to do anything rash that would damage my system, I mean I don't dislike the Apple dock enough to do that. Thanks in advance for the consideration and suggestions.

    I could only discover an option to hide the dock from within Drag Thing. I am looking to make the dock disappear completely. Drag Thing does not officially support this option, giving this answer in the Q & A section of their website:
    "*It is possible, but I wouldn't recommend it. Since people often ask how to do it anyway, here's a good tutorial I found on how to kill the Dock by Kevin Schmitt. This may have unforseen side effects however, which is why I've not documented the procedure myself, or added an option for this in DragThing. I keep the Dock hidden off the bottom of the screen on my own Mac.*"
    Is the dock so embedded within the Finder's operations that killing it will affect system performance?

  • Is it possible to turn off the passcode?

    I’ve seen a couple postings that say go to Settings --> General --> Passcode Lock, but on my iPhone 4s I don’t see anywhere to turn it off at that point.  In the manual, there is no description of turning off the passcode – at least I didn’t find it.
    Is it possible to turn off the passcode?

    row6 wrote:
    no, once you get to Passcode Lock, there is no option to turn it off - certainly none visible to me.  Have you actually tried to do this?  Do you have an iphone 4s?
    Here is a screen shot of what you get when you press "Passcode Lock".
    You have to ENTER your passcode first, to access the part of the Settings that allows you to disable the passcode lock.
    Enter your passcode.
    Then you can turn the passcode off.

  • Is it possible to turn off the updates that make your iphone need to be activated again?

    Is it possible to turn off the updates that make your iphone need to be activated again? Because you need wifi in order to activate and sometimes I don't have wifi so my iphone becomes unusable untill I get wifi again.

    I'm sorry but it says 8.1.2 on my phone when I check for the info about the software.
    The issue I have is that on random moments it asks me to activate my phone ( I think after an update or some kind ) but sometimes I have no access to wifi to activate it so I was wondering if I could make that stop?
    I'm sorry for the strange explanation, english isn't my mothertongue

  • Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    There is no specific function that turns FGL on or off.
    When you say that it has stopped, do you mean that the handles no longer show?
    If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
    There are a couple of avenues for you
    Redo the site and make sure not to touch the FGL CSS
    paste the code here so that we can see what has gone wrong.

  • My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

    This user has found a "hack" to turn off faces.  Several users have reported success with the method.  I can't comfirm the method as I've not used it.  Use at your own risk.
    lopezio
    Re: Iphoto 11 -How to turn off faces?
    Dec 30, 2013 9:06 AM (in response to mkmichaelmk)
    Start of solution:
    I did some digging in the prefs of iPhoto and found out the following. This is how you can disable (turn off) Face detection, without deleting faces found so far (just in case you want to restart processing at another time):
    1. Quit iPhoto
    2. Open Terminal Application (Applications/Utilities/Terminal.app)
    3. Type the following (exactly as is):
    defaults write com.apple.iPhoto PKFaceDetectionEnabled 0
    (then return)
    4. - Start iPhoto - Faces stops getting on your nerves...
    If you ever need to re-enable faces, just do the same again and replace the 0 with 1.
    OT

  • Is it possible to turn off selected audio tracks for export?

    Hi,
    I have worked with fcp 5 before on a project with two languages. Beside the footage audio, each language had its own audio track which I could turn off for export. It was nice to have all languages in one project, because changes had effect for all languages at the same time.
    Is it possible to turn off audio tracks in fcpX for export?
    I know that fcpX hasn't tracks anymore, but is there a similar function to serve the same purpose?
    I am not a professional editor.

    I am blissfully unaware of how production companies work .
    The project I am working on is a pretty straight forward instruction video. I will be shooting the video, edit and then have the comments recorded by professionals. In DVDPro I will put them both together.
    The magnetic timeline is kind of irritating. I will have to work on the languages one after the other. So once I have a language done, I will probably create a compound clip to prevent the sliding around. That would also make it easier to enable or disable the clips.

  • Is it possible to turn off iMessage off for one individual during group text?

    Can I turn off iMessage for individuals who use the iPhone and IOS 5 but do not have their iMessage setting on?  I want to group text with two other people.  They both have IOS 5, but one does not use iMessage.  She can't recieve the group text unless I turn my iMessage off for everyone.  Is it possible to turn off iMessage for one individual for a group text?

    Have you set font smoothing in Appearances (System preferences) to match your monitor?

Maybe you are looking for

  • Performance Problems Bex 7.0 and Office 2007 Workbooks

    Hi we had a performance Problem with Bex 7.0 and Worksbooks in Office 2007. The Workbooks are created with Office 2003 and runs with good performance but in Office 2007 the performance is inacceptable. E.g. open Workbook with Office 2003   --    30 s

  • After i updated to adobe xl thunderbird wont open pdf docs in my emails

    Hi I updated to adobe xl and since then thunderbird will not open any pdf document within my emails but it did before can anybody help please

  • Nokia 7373-how to move images etc to phone memory ...

    Hi Ive just bought a cool nokia 7373 and after bluetoothing all my images/videos/music from my old samsung Im having trouble sorting them all into images/videos/music folders. They are all in my memory card muddled up just now but if I mark all my pi

  • Clipboard paste not working properly

    When I try to paste text at the end of an existing line from the clipboard using right-click, the existing text gets highlighted, so that if I then select "paste", it will replace the highlighted text instead of adding it at the cursor location. If I

  • UnsatisfiedLinkError: `GCC_4.2.0' not found(req. /usr/lib/libstdc++.so

    bash-3.2$ ldd /koba/c/libs/libbluejni-1.1.so linux-gate.so.1 => (0xffffe000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xf7dfe000) librt.so.1 => /lib/librt.so.1 (0xf7df5000) libc.so.6 => /lib/libc.so.6 (0xf7cb1000) libm.so.6 => /lib/libm.so.6 (0xf7c