Airport Extreme not going through walls.

in my room I get full bars with the AE, but as soon as I put any wall inbetween me and the base station, i lose all connectivity. Not much of a point to have wireless if I cant have my room, I would have thought for $199 it would have been better Anyone know anything I can do to get it to go like 40-50 feet with a couple of walls inbetween me and the station. Thanks for any help

I guess its not the walls, I can go into the very next room, set the computer on a desk that is at about the exact same point of the base station, just on opposite sides of the wall and I get full reception.. I guess it just cant take being 20-30 feet away... I also tried making sure the antenna of the airport card in my 12' powerbook g4 was plugged in and it seems to be. But I guess it wouldnt be that if I am able to connect to my neighbors network, which im sure is well over 60 feet away from me, through many walls.

Similar Messages

  • Airport extreme not passing through

    I set up my airport extreme and my computers see it but when I try to go to the internet their is no connection.
    When I plug my computers directly there is a connection.

    clodene, Welcome to the discussion area!
    If you are using a cable modem, make sure that you power down and reset the cable modem when switching the Ethernet connection from the computer to the AirPort Extreme base station (AEBS).

  • Emails from the organization are not going through ePrint

    Hi,
    I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that 
    The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
    We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

    Hello praveen_haridas,
    Welcome to the HP Support forums.  I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
    Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account?  If so what does the message state about the failed job?
    Thank you.  
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Officejet 6700 Fax not going through

    When I try to send a fax, it dials but never connects?

    Hi @Carlita61,
    Welcome to the HP Forums!
    I noticed that the fax is not going through with your HP Officejet 6700. I am happy to look into this for you!
    What type of phone service do you have? Analog or digital? Analog. Digital. What’s the Difference?
    If the phone service is analog, please see this guide, Cannot Send or Receive Faxes.
    If the phone service is digital, please go to this guide, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line. Note: HP fax devices are designed to work with traditional analog phone services. They are not designed to work with digital phone services such as ADSL, PBX, ISDN, or VoIP. While HP fax products are not supported on these types of lines, they might work given appropriate setup and equipment.
    To find out if your phone service is analog or digital please contact your phone provider.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
    Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
    Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
    1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
    No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
    2) Are there any changes I can make to get this working again?
    If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
    Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

  • Service Account details are not going through header(OSB Business service)

    Hi
    I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
    A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
    I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
    Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
    I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
    Can someone please help me why service account details are not going through business service request. Am I missing any steps?
    Thanks in advance
    KK
    Edited by: 966531 on Oct 23, 2012 4:23 AM

    Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
    Regards,
    Anuj

  • Why does my airport extreme not recognize my cable modem anymore?

    Why does my airport extreme not recognize my cable modem anymore?

    Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
    Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
    Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet.

  • My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?

    My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?  Anyone else having these issues?

    There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
    If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

  • Messages are not going through in my Ipad. I have upgraded to ios5

    My messages are not going through in my ipad. Recently I upgraded to OS to ios5. It says not delivered.

    Try calling *228 and choose option 1 to reset the 0's and 1's on the device.
    Is there a setting on her phone that she may have triggered in her contact for you by accident to block your texts

  • HT5627 My I messages are not going through

    My I messages( text) are not going through
    I have to change all to deliver as text

    Yes, many are experiencing this issue.  A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
    Let Apple know about the issue here:  http://www.apple.com/feedback

  • Why are my audiobooks not going through home sharing?

    why are my audiobooks not going through for home sharing.

    According to this thread (https://discussions.apple.com/thread/3525692), it looks like you are not able to share audiobooks through Home Sharing:
    You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files.
    You can leave iTunes feedback here: http://www.apple.com/feedback/itunesapp.html

  • International calls not going through

    Just I have paid for 800 min India subscribtion and calls are not going through
    Regards
    Subhash

     Hello,
    We don't have any reported issues of call malfunction. (There aren't any "international" calls with Skype). All Skype calls are "local" worldwide including calls from one country to another.
    Please contact customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Online no is not going through

    Hi there,
    from couple of days, the person who is calling at my skype no are saying the call is not going through. can someone please sort this mette out ASAP 

    As I replied in your duplicate thread, these are user-to-user forums, you are not talking to Apple here.
    You can contact iTunes support via this page :http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

  • Wanted to buy Philips Hue bulb but payment not going through

    Hi, I'm from India & want to buy Philips Hue bulbs. But the payment is not going through. I have tried with 3 credits cards that i have, but didn't go through. I was able to buy the starter pack of philips hue a month ago & i got those bulbs here with the help of my friend in USA. Now i tried with same credit card but was not able to buy.
    Also searched though whole site & couldn't find email id where i can send mail to customer support. Apple site takes you round & round through their site but no email id to be found.
    Hope some customer support person see's this post.

    Hi Manoj,
    I would recommed getting it from a European country or from the UK which has a 220-240V supply. The US bulbs are 110V and i've read some conflicting reports on their compatibility with a 220-240V power supply (India). It turns out to be expensive if you buy it from UK as compared to the US but at least there will be no doubts about it working. You may just be taking a chance plugging a US 110V directly in India but if you already have tried it then please share your experience here.
    All the best!!
    Regards,
    Hanoze

  • I am having problem with my imessages not going through

    I am having problems with my tx messages not going through.  some do and some don't

    Do you mean after a phone update? Do you mean just at home? Does it happen everywhere?  Do you have wifi turned on? If its on and your not connecting just clear out the connections (forget) then reset up the connections and see if that helps.  Did you get a Jelly Bean update? Many people have had wifi connections issues because your router is either outdated and not supported with the new os, or it needs a firmware update.  Post back with more information.

Maybe you are looking for

  • Anyone know why my iPhoto program won't save my edited photos?

    I can see them in the album and in the "events" in my library. When I open it that far, I see all of my edited photos, but when I open them individually, they are unedited unless I click on the "EDIT" button....THEN, they show up edited! They are als

  • Is there a way to see what files iTunes just synced with my iPhone?

    OK, I've been working with my music files trying to find some sort of work-around to iTunes not updating or deleting my lyrics on my iPhone.  I been working on one music file at a time.  I'll make a change of some sort, then have iTunes "Sync" to my

  • Windows 8.1 Computer taken over.

    My daughter used my computer last night to download a movie turned off my virus protection and used a program to down load.  By the time I realized it was too late.  She down loaded something called Optimization tool and uTorrent.  I uninstalled both

  • Processing Application OLAP Error

    Hi Experts, After processing my Conso Application i get this error:   - CubeProcess : Internal error: The operation terminated unsuccessfully. Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactConsolidation, Colu

  • OSB installed in WebLogic 12C - when it will be supported

    As I believed that OSB is nothing more than a webaplication with specific tables in Oracle database I imagined that I could try to install OSB in WebLogic12C. Maybe I am telling a stupid thing because I can see that after installed OSB, there is a sp