Airport Extreme not working after downloading 10.8.3 on Mac Mini Late 2009

I downloaded latest upgrade OS X 10.8.3. This is onto a Mac Mini (late 2009). The Mini is hooked up to Cable Ethernet. I use the Mini's Airport Extreme to use as a Hub for other Apple devices to get onto the internet. I was enabling this through internet sharing through the sharing tab on system preferences. it has worked for years. I have restarted and tried several times. I do not know what to do . The names of the computers have not changed. I am a user not a whiz bang programmer type, it is very frustrating.

Hi, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Try setting up Internet Sharing in the new location.

Similar Messages

My sound on FaceTime is not working after downloading iOS 6 ??

Ever since I have downloaded iOS 6 when I am on a FaceTime call nobody can ever hear me. Has anyone else had sound problems since the new update ??

Re: My sound on FaceTime is not working after downloading iOS 6 ??
Apr 8, 2013 12:16 AM (in response to B69B69)
same issue here... And a restore didn't do any good either.
Try backing up your information to iTunes, and Restore your devices as new with no content on it what-so-ever. If the issue persists after that, this may be a hardware issue. Check your Mic's for debris, and remove the case you have on the device as well to see if you have the same results. Then contact Apple Support if all else fails.

Google Chromecast does not work after downloading Blackberry Link

Google Chromecast does not work after downloading Blackberry Link.
Both don't work in tandom at the same time.
Some elements of Blackberry Link are interferring with Google Chromecast's detection and casting.
Please rectify the problem.

Yes they are not compatible. I do not have either program so could not try anything.
Try running one in a different compatibility mode.

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Mac Mini Late 2009 - Lost monitor mirror after Mountain Lion Update

I have a mac mini late 2009, mirror to dual monitors was working fine prior to Mountain Lion update. After update I have lost that function. The icon top right is gone. Basic functions like that should never disappear. Please fix on upcoming os builds.
System preferences Mirror options checked.
I have been running dual monitor on this mac since purchase. Monitor 1 is 24" display, Montor 2 is a 32" 720dpi tv only used for watching videos. This set up has been running well.
The dual monitor function works fine but I never use it that way. I am interested in "mirror" option when watching a video from various applications.
Again this was working fine until ML update.
Any one else experience this issue?

Oh. You are so in jail.
Plug the mini straight into the wall power supply.
You do have 4 - 8GB memory installed, right?
Disconnect everything but power and the display port to regular monitor connection. Make sure that external monitor is switched to the type of connection: DVI, HDMI, VGA. Wrong setting and your mini could be booted up sneering at you from behind a dark screen.
Boot mini.
Any change?

Script does not work after download

Hi,
I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but fails when downloaded through an application. I downloaded form and to check if the scripts are still there or not, the script was present, but would not simply execute, for ex. while on clicking of button, certain fields on the form are to be hidden, but this would not work.
ex. this.parent.parent.StaticText39.presence
= "hidden";this.parent.parent.STELL_STEXT.presence
= "hidden";
The above scripts work perfect durong designing the form, but would not work after form is downloaded through an applciation. Could any one have answer to wierd behaviour?
Regards,
Shishir.P

Was the form saved as a dynamic XML form?
While the default preview in LiveCycle Designer may be set to dynamic XML form, thus providing the dynamic behaviour you are seeking, if the form is not saved as a dynamic XML form Adobe Reader and Acrobat will not respect the changes to the presence property at run-time.
Steve

Updates to airport extreme not working

I am trying to add a new computer using MAC Address Access Control for my airport extreme. Every time today (tried 4 times) that I have tried to add a new computer: Access Control->+->entered the MAC address and description->update. The airport extreme goes off then on, but then the network cannot be found; I then manually restart the airport extreme, the network is located, but the new entry (MAC address for new computer) doesn't appear in the access control list. The airport extreme is version 7.5.2 and all is updated. The Macintosh I am using to update the airport extreme is running Mac OSX 10.6.7. Am I missing something?

It's a hassle, but might be worth a try to reset the AirPort Extreme back to factory defaults and then try the complete new configuration again.
If you decide to attempt this, you can reset the AirPort Extreme by clicking AirPort Utility - Manual Setup. Then click the Base Station menu item at the very top of your computer screen in the same toolbar area as the Apple icon.
Select Restore Default Settings.
No guarantees here, but this procedure has worked for other users who have reported the same issues.

Airport Extreme/Time Capsule not working after downloading 7.6

Downloaded airport 7.6 last night and now time capsule/airport extreme doesn't work. I can't even reset the tc to factory default settings. Not sure what to do now.

Hi, today I got the same problem after 7.6 update for my Time Capsule. I tried to downgrade to 7.5.2, but afterwards the problem was not solved. Then I tried to set fixed channnels - and it works! For 2.4 Ghz I used channel 12 and for 5Ghz channel 48. Beforehand I used "automatic" for both. Hope it works for you too. I don't know, how Apple's test team spend the whole day ;-)

Airport Extreme not working properly after upgrading from Tiger to Leopard

I've been using the Airport on a home network to share internet between a Mac & PC via ethernet. I don't use wireless. My internet provider is comcast via cable modem. During the Leopard install the Airport asked for a firmware update to 7.3.2. So I installed the update during the transition. I lost internet connection. I resolved this by calling comcast- who reset my modem. This got the Mac connected again but not the PC. When I attempt to share the connection via the Airport utility, I loose internet again.
The error message is:
Your Apple wireless device does not have a valid IP address. Make sure your Apple wireless device is connected to your broadband modem or local network, verify your settings, and try again. If you still can't connect, contact your internet provider
What is a valid IP address? How can I determine what it is?
Also, I cannot see the PC on the network.
I've attempted going back to the previous firmware (7.3.1) but it didn't solve the problem
I'm connected to the internet now by taking the airport out of the loop and going directly into the Mac from the Modem.
Thanks Steve

Moved to AirPort Extreme (802.11n) forum

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

Airport does not work after upgrade to windows vista SP1

Hi,
I have a MBP running windows vista 32 bit under bootcamp. For some of my professional software, I need windows. Up to now, everything runs OK.I've upgrade to bootcamp 2.1 and everything still runs just fine. However, I wanted to install SP1 because it fixes some of Vista's (many) flaws. After installing SP1 (it downloads automatically), e.g. airport does not function anymore - it just does not see the wireless anymore (it looks like on my MBP it does no longer find the drivers for e.g. the wireless card). Uninstalling SP1 fixes the problem but brings me back to square 1. Any solutions? Thanks.

Hi,
Please reinstall the following package:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63287.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

External hard drive connected to Airport Extreme not working on PC

I have a Macbook Pro running 10.9.1 and my work laptop, which runs Windows 7. I have a WD 2TB external hard drive connected to my Airport Extreme, with 1TB formatted for Mac and the other 1TB formatted in FAT format. My Macbook can connect to the drive and read/write perfectly fine, but I'm not even seeing the drive on my PC anywhere. I'm wanting to use the Mac formatted partition to backup photos and personal documents and the FAT partition to backup my work.
Is there a setup thing I need to do on either the Airport Extreme or on my PC to connect to have the drive visible? Both drives are setup to allow file sharing and my Airport Extreme is running version 7.6.4.
Thanks!

There are 3 different methods to establish a connection from your PC to the hard drive in this Apple support document:
http://support.apple.com/kb/HT1331

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

Airporter does not work after snow leopard upgrade

I upgraded my old macbook to snow leopard, and the Time Capsule can not detect the disk drive on the Airporter. The laptop has no problem using airporter to get to the internet, and the airport utility can see the disk drive. After the install of snow leopard, I saw the time capsule, and it asked if I wanted the file recovered from the time capsule. This seemed to work perfectly, and made the upgrade painless except my time capsule does not work anymore.

I have the metadata.mds.plist but I do not have the Spotlight.plist as well. Regarding a fix, I had a similar issue with Spotlight's index when I upgraded one of my iMacs. A clean install, properly resolved the issue. I'd be curious if a reinstall of Snow Leopard would take care of the issue, as the A&I feature isn't there anymore I've yet to determine what exactly the install of SL over SL would do. My understanding is that the A&I is performed, it's just not called as such.

USB ports not working after downloading I tunes 10.1

After downloading I tunes 10.1, as prompted by I tunes, , I got the device not recognized message for my IPOD. Also, a bonjour error message. I un installed and re installed as per instructions and still had the problem worse-none of the USBs are working. They were working before I downloaded the new release of I tunes.
I believe this is a bad download-any idea how I can fix this problem?

Please click on the first link first and then try the second link if the first one doesnt work
Intel USB 3.0 Host Controller Driver
OR
Intel USB 3.0 Driver for Intel® NUC
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Airport Extreme not working after downloading 10.8.3 on Mac Mini Late 2009

Similar Messages

Maybe you are looking for