Airport Extreme on Windows XP - where is Airport Setup Assistant?

I am trying to set up a home network for the first time between a Windows XP computer and an iMac G5. The PC already has internet, and I want to get Internet on my Mac too. I am following the steps in the setup booklet that came with the Airport Extreme, and it says to go to Start>All Programs>Airport but I can't find it! Can anyone please help me?
Thanks!

I am trying to set up a home network for the first
time between a Windows XP computer and an iMac G5.
The PC already has internet, and I want to get
Internet on my Mac too.
Is your PC already wireless or wired? Is your broadband modem connected to the WAN port of the Extreme Base Station? Is your Mac going to be wired or wireless?
I am following the steps in
the setup booklet that came with the Airport
Extreme,
Did you install the software on the PC from the CD or here?:
http://www.apple.com/support/downloads/airport42forwindows.html
and it says to go to Start>All
Programs>Airport but I can't find it!
Can't find the Airport software or the when launched can't find the base station?
Did you know there's a section of this discussion area called "Airport for Windows?"

Similar Messages

What cables to use when connecting Airport Extreme and Windows XP?

I have a DSL modem and Airport Extreme. Right now I am getting Internet with the cable plugged into "Ethernet" and is connected to my computer. If I want to connect my Airport Extreme to my computer, where do I plug in everything?
Thank you for your help - I am a complete wireless newbie!

Jgreene19
You don't seem to be making much sense, please can you clarify your network and your computer.
You have a DSL modem with an Ethernet port?
Do you have an Airport Extreme Base Station?
What computer do you want to connect by Airport, your iMac listed in your profile (or as this is an Airport for Windows forum) a Windows PC?
Does this Windows PC have a wireless card or not?

How do I connect my airport extreme to windows 8.1

how do I connect my airport extreme to windows 8.1

Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

Does airport extreme 802.11a/c work with airport express 802.11n

does airport extreme 802.11a/c work with airport express 802.11n

"You can use the AirPort Express to extend the signal provided by the new AirPort, but the Express will not extend "ac" wireless since it does not have that capability. The Express will extend an "n" wireless signal if that helps."
This is what I am trying to understand.
So AXTRM w/ sep SSID for 2.4 (b/g/n) - call it SSID1 - and 5GHz (ac) call it SSID2 - WiFi Explorer confirms AC mode on 5G.
Using an AXPRESS to extend - I have the option of SSID1 b/g/n *and* the 5GHz ac SSID2 in the pulldown (it sees both?) --> if I select SSID1, it also extends this same SSID in 5GHz (both showing b/g/n) >> so I now have 3 signals on SSID1 (XTRM 2.4G, XPRS 2.4G and XPRS 5G) b/g/n and one signal on SSID2 (XTRM 5G AC) ac
If I select the 5Ghz ac SSID2 to extend - it prompts me "do you also want to extend (the 2.4GHz SSID1)?" --> select yes and I now have 2 signals for SSID (XTRM 2.4G & XPRS 2.4G) b/g/n and 2 signals on SSID2 (XTRM 5G 802.11ac & XPRS 5G 802.11 a//n)
Is the 5G SSID2 actually being extended from the Airport Extreme to the Express?
The reason I bring this up is I am having a lot of issues since iOS8 came out (especially on iPhone 6). Everything I am reading is pointing to when people have 2 AP's set to use the same SSID. When you walk to a part of the house where 5G 802.11 ac signal marginalizes, the phone does not immediately hand over to the 5G 802.11 a/n Airport Express.
My thought was separate the SSID's but to me, if the Express can't extend 5Ghz from the Extreme, it's taking a step backwards. I am better off getting a more powerful router like an ASUS and going with one AP, drop the WiFi roaming altogether
Any thoughts?

Airport extreme can not be recognized?, Airport extreme can not be recognized?, Airport extreme can not be recognized?

My Airport Extreme Station (4th Generation) is all of a sudden not recogized by the Airport Utility Software. I rebooted the Airport Extreme device a few times, disconnected it completely, and did it set it back to the factory default setting. No recognition. I tried configurating it with all my devices; IPhone 4S, IPad, MacBookPro and new iMac. Always the same message, even though I have internet access through the Airport default Wifi-ID. So the the Airport device works properly. Just no access for configuration, Does anyone has an advice to get back into the Airport Set-up through the Airport Utility program? Thank you.

Hello loving-truth,
I understand that your Airport Extreme is not being recognized in AirPort Utility, however you are able to access the internet via the Wi-Fi signal. We can give the steps in the following article a shot:
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Thanks,
Matt M.

I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Airport Extreme Base Station as Extender to Airport Extreme Time Machine

I have tried this a few times, but to no avail: Tonight I purchased an Airport Extreme Base Station (AE) to set up as an extender to my Airport Extreme Time Capsule (AETC). The Airport Utility finds the router and goes through set-up seemingly fine, with green lights on both. Then shortly after (within a minute) the AE reboots on it's own, followed by the AETC rebooting (again, on it's own) and this occurs repeatedly. I reset the AE completely and run through the set-up and the same thing occurs. I've also done soft resets to the AETC. Long and short of it - the restarting discontinues once I unplug the power cord from the AE. Then the AETC resumes as it has - providing fine wifi and speed. It appears the AE rebooting on its own makes the AETC reboot. Any ideas? Thanks!

howto - extending airport 802.11n networks
Pre-Requistites
1) Ensure all have most recent firmware - 7.7.3 for AC devices, 7.6.4 for 802.11n devices
2) Have most recent Airport Utility (OS X 10.7 thru 10.9, use 6.3.2, IOS6/7 use 1.3.3)
3) Only have the Primary Airport/TimeCapsule powered on for now
Set up the Primary/Anchor Airport Base Station
1) Do this over ethernet - ensure that the Modem and TimeCapsule/Airport is connected on the WAN port
2) You'll be prompted by Airport Utility to name the Network and the Base Station
Network is the SSID of the Wireless LAN
BaseStation is the name of the Airport/TimeCapsule
3) You'll be prompted for a password - this will be for both the WLAN and the Base Station on initial setup
Note here - there are at least three passwords to worry about post setup
a) BaseStation Management - in this how-to, this will be carried thru to the extended basestations
b) WLAN Access
c) Disk Access for TimeCapsule and AirDisk
They can be same or unique, up to you...
Configure the Airport/TimeCapsule for WiFi/Network
4) Select the named BS in Airport Utility - click the 'edit' button
5) Review 'Base Station' Tab
5a) BaseStation Name
5b) BaseStation Password - you can change this now if desired, this does not affect WLAN password
6) Review Internet Tab
6a) set as appropriate for your network - e.g DHCP or other depending on needs
6aa) focus here is getting the primary BS set up first
6b) Click Internet Options - this is IPV6 setup - for now...
6ba) Set to Link-Local Only, click save, you can go back and change this later if needed
7) Go to Wireless Tab
7a) Set Network Mode to "Create a wireless network"
7b) Check Wireless Network Name
7c) Wireless Security - recommend WPA2 Personal - this is important as you'll need this later
7d) Wireless Password - the password entered in step 5b above is what is used here, feel free to modify or not - if so, note this
7e) disregard Enable Guest Network for now
7f) Click Wireless Options
7g) ensure 5Ghz network name is unselected
7h) Country as appropriate - since I'm in California, I choose United States
7i) Leave 2.4Ghz and 5Ghz Channels as "Automatic" for now, click save if needed
8) Click Network Tab
8a) if this is your primary router - use DHCP and NAT
8b) Click Network Options
8c) DHCP Lease - I use 12 hours
8d) IPv4 DHCP Range - every here is a bit different, but my recommendation for most folks
192.168.1.100 to 150
Use what works for you, keeping in mind that the AP Extreme, TimeCapsule, and 2012 Airport Express can handle 50 clients, max
8e) Ensure that Enable NAT Port Mapping Protocol is selected
8f) can worry about Enable default host at: [] later, this is the DMZ'ed host
8g) can choose to enable IGMP Snooping or not - doesn't affect the primary setup
8h) click save
TimeCapsule Only - for Airport Extreme, worry about AirDisk later
This is TimeMachine support, along with FileShares
9) Select Disks - you should see a partitiion named "Data"
9a) ensure that Enable file sharing is selected
9b) ensure that Share disks over WAN is unchecked for now
9c) Secure Shared Disks:
Choices here -
device password - noted in step 5b above
disk password - this will be for all LAN clients that can see the Data Partitiion
accounts - you can set up separate users and passwords - this is beyond scope of this how-to
Recommendation if using as TimeMachine only, use a disk password - note this as you'll need it for timemachine on the clients
Save Settings to the Airport/TimeCapsule
10) Click the "update' button
The Airport/TimeCapsule will restart
Everything now should show green and shiny - open a web browser and attempt to go to Apple/Google/Yahoo, to ensure that you've got network connectivity
Reviewing things in the Airport 6.3 utility, you should see your base station and the Internet - both with green status
Once done here, let's extend the Wireless Network
Note - again, it helps to be connected to the primary base station on ethernet, wireless makes things, erm, challenging
11) with another decive - Mac/iPad/iPhone/iPod Touch or PC, ensure that Wireless LAN is working on the primary AP/Basestation
Once this is done, then proceed to the next step
Enable the "Extended" Airport - can be another TimeCapsule, Airport Express or Airport Extreme
For purposes of this discussion - assume all ore 802.11n capable at a minimum, so this applies towards more recent gear
a) Airport Extreme AC (2013)
b) Airport TimeCapsule AC (2013)
c) Airport Express 2012 Dual-Band (Looks like AppleTV)
d) Airport Extreme 802.11n 5th Gen, TimeCapsule 4th Gen
e) Airport Express 802.11n - similar to the 802.11g variant, looks like a MacBook Pro power adapter
Assumptions here is that the extended airport is factory defaults - see link below for more info:
http://support.apple.com/kb/HT3728
Once this is done, plug in the Airport that is intended for extending the wireless network
after about a minute or so, you should see a blinking orange light, this is normal...
In Airport Utility, you should see in the upper left hand, "Other Wi-Fi Devices (1)" - click this, if you don't see this, exit and restart Airport Utility
12) clicking on the button, you should see an entry menu as "Airport Extreme xxxxxx", select this
13) Once selected, you'll see "This Airport Extreme/Express/TimeCapsule will be set up to extend "Primary Base Station"
14) Enter the name for this base station - it should be unique from the name of the Primary noted in step 5a
15) Click "next"
16) Should see "setting up this base station to wirelessly extend..."
you'll see some progress messages.. this is the two basestations handshaking....
If successful, you'll see the BaseStation named in step 14 as "is now wireless extending "base station named in (step 5a)"
STOP - the Airport is now extended, repeat steps 11 thru 16 for each addtional Airport
For advanced features - such as port forwarding, DMZ, IPv6 Tunnels, Back to my Mac, etc - perform this only on the Primary Base station outlined in steps 1 thru 8h
Good Luck!

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Airport Extreme doesn't show up in Airport Utility.

Just got a new Mac Mini and a new Airport Extreme.
When I tried to set up Airport Extreme today, ran into some problems.
1) Light is flashing amber
2) Airport Extreme does not show up in Airport Utility
3) I have DSL and ethernet cable is plugged into WAN port on Airport Extreme.
4) Both units are sitting side by side and yet there's no connection detected.
5) Airport Utility keeps telling me to rescan as it cannot detect any wireless devices.
Any suggestions would be greatly appreciated!

If you are trying to connect using wireless, make sure that you are connected to the default wireless network that the AirPort Extreme provides for setup purposes. The network that you are looking for will have a name like Apple Network xxxxxx. There is no security, so a password is not required. It usually also helps to restart both the computer and the AirPort Extreme.
You can also temporarily connect an ethernet cable from your computer to one of the LAN <-> ports on the AirPort Extreme. Restart both the computer and the AirPort Extreme when you do this.

Trying to clarify what these are: is airport extreme a router? What is airport express?

Trying to clarify what these are: is airport extreme a router? What is airport express a router as well?

SimonJester753 wrote:
It was a long time ago. I remember wanting to connect my desktop mac via an ethernet cable, but the setup assistant was insisting on wireless. I think I finally took out the wireless card from my Mac so it would use the ethernet cable. Eventually I put the card back.
The zillion and one setting to wade through might mean more choices to the tech-heads, but I just wanted it to work.
I don't recall the type of router we had at my previous job, but I just plugged it in, went through a simple set up and forgot about it because it just sat there and worked.
I have had to go back to factory settings and start from scratch with my Extreme many times. The last time the amber light started blinking I just ignored it for months, because it didn't effect my internet connection, I just lost the ability to get iTunes over to the Express I have hooked up to my stereo.
BTW, what's a wall wart?
The big box on the cord.

Can an airport extreme base station attached to another airport extreme base station as an extender transmit a different network name and have it's own security?

Can an airport extreme base station attached to another airport extreme base station set up as an extender transmit a different network name and have it's own security?

No. The AirPort cannot extend another AirPort's wireless network and simultaneously broadcast its own wireless network.
It can however, be connected to another router (including another AirPort) by Ethernet, and then, be configured to broadcast a wireless network with another Network Name and Security Type.

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

The utility has had less and less useful information .. it might be time to simply find a different utility.
Fing network scanner. iphone and ipad.
https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8
This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.

Airport Extreme dual band extended network, 1 airport drops off

Greetings,
I have 2 brand new airport extreme base station purchased (2-2011)
I setup them up correctly and it functions fine for about an hour or two, then the extended airport (the one not connected to my LAN via ethernet) drops off the grid. I can't ping it (Statically assigned IP) and Airport Utility can't find it. iStumbler reports it's still up for an additional 10 minutes. The light is steadily flashing. If I reboot either one of the airport extremes it all comes back up automatically, however only for a few hours. I tried this with firmware 7.5.2 and 7.5.1 with the same results. I also reset both to factory defaults and re-configured once again. same results?
Thoughts?
LJS

Hello,
Have you resolve your problem?
in airport utility - Internet - DHCP - DHCP Lease what is the length of the lease ?

Airport Extreme on Windows XP - where is Airport Setup Assistant?

Similar Messages

Maybe you are looking for