Airport Extreme? Or not? No clue!

My mom has a Dell PC, running Windows XP.
She has DSL service, and we have attached and configured a Linksys Wireless - G Broadband Router to her computer.
I have a 1 GHz eMac G4 running OS 10.3, on the other side of the house. We are trying to hook it into my Mom's DSL service.
Sprint, her provider, told us the next step would be to find a wireless adapter that would work on my Mac.
Would an Airport card (Extreme???) work in this case? <begging for help>
Someone else suggested the AeroPad Mini - would it work? It's by MacSense, I think.
Also suggested were Buffalo and Belkin USB adapters.
I don't know which way to turn - I just want something that will WORK!!!!
Thanks,
Concetta

Hey, Rod
Thanks for such an authoritative answer.
I think I can now order that AirPort Extreme card and be confident about that decision.
Cheers yourself, and THANKS for answering!
Concetta
As an Italian, I love espresso too. I think I have it in my veins instead of blood!

Similar Messages

My airport extreme will not connect to the Internet

My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Airport extreme can not be recognized?, Airport extreme can not be recognized?, Airport extreme can not be recognized?

My Airport Extreme Station (4th Generation) is all of a sudden not recogized by the Airport Utility Software. I rebooted the Airport Extreme device a few times, disconnected it completely, and did it set it back to the factory default setting. No recognition. I tried configurating it with all my devices; IPhone 4S, IPad, MacBookPro and new iMac. Always the same message, even though I have internet access through the Airport default Wifi-ID. So the the Airport device works properly. Just no access for configuration, Does anyone has an advice to get back into the Airport Set-up through the Airport Utility program? Thank you.

Hello loving-truth,
I understand that your Airport Extreme is not being recognized in AirPort Utility, however you are able to access the internet via the Wi-Fi signal. We can give the steps in the following article a shot:
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Thanks,
Matt M.

Set the Airport Extreme to not broadcast the SSID

Set the Airport Extreme to not broadcast the SSID

"Hiding" the SSID will do nothing to protect you from hackers.....and anyone else who wants to see your network, since there a numerous free utilities on the Internet that will reveal your network in seconds.
On the other hand, it might keep a few honest neighbors from seeing the name of your wireless network.
iOS devices often have trouble connecting to a "hidden" network, so you may need to display the network if your iPhone, iPad, etc have trouble connecting to the network.
Your call on this.
Assuming that you have Lion, Mountain Lion or Mavericks on your MacBook Pro.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit in the smaller window
Click the Wireless tab at the top of the next window
Click Wireless Options at the bottom of the window
Enter a check mark in the box next to Create Hidden Network
Click Save, then click Update and allow a full minute for the AirPort Extreme to restart

Connects to Airport extreme but not to internet

Whenever I close my laptop and reopen, I lose internet connection thru the airport extreme and I won't get it back. It seems that I will have connection to the Airport Extreme, but not the internet.
Sometimes what fixes it is turning the airport off and then on again (sometimes multiple times). Usually restarting the computer fixes it (but not always).
What happens is this (viewing Sysprefs/network/airport/network status and "internet connect"): the internet connect will report connecting...then will announce "connected", but show no "time elapsed" at the same time the Net status will read "airport is connected to ..network...with it's own IP address and may or may not be connected to the internet" And I won't be.
Then, when it starts working again (after the abovementioned turning off/on) it will start counting time elapsed, then in Net Status it will say "airport connected to ..network. you are connected to the internet via airport."
Also, whenever I use "internet connect" to turn the airport off, when I turn it back on again I will not have internet access, just the messages I list above. The "strenth meter" will say my signal is good (which it should be) and it says I am connected but doesn't show "elapsed time" nor will I have actual internet access.
Again, restarting the computer will usually work (less often, logging out then back in).
Another strange symptom-- When I hit the "disconnect" button under the airport section of "internet connect" it disconnects, then reconnects immediately. When I hit the disconnect button w/ in the Sysprefs/network/airport...etc, it does nothing but bring to the front window the "internet connect" window. So the only way to "disconnect" is to turn off the airport (which results in the above problem).
Side note--I am in the habit of turning off the airport (not the base, but from the computer) when I don't plan on using it for security-- am I being excessively paranoid? I do have my firewall in operation. Should I just leave it (being the airport) on all the time (in your humble opinion?
Sorry if this makes no sense or rambles, it is now 5:30 am and She Who Must Be Obeyed will be getting up in about an hour wanting to know if I fixed the computer yet. I'm tired.
Thank you in advance.
17" powerbook 1.5 PPc G4 Mac OS X (10.3.9)
17" powerbook 1.5 PPc G4 Mac OS X (10.3.9)

Try the following:
Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

Internet connection is through airport extreme is not connected

internet connection through airport extreme is not connected maybe there is a problem setting it up

Is it possible that using a Netgear Router connected
to the AE (which is also a router if I understand
correctly) could cause connection problems ?
Yes.
Ensure that that the AEBS is configured to not distribute IP addresses.
Also ensure that the AEBS is on a different channel to the DG834G.
iFelix

My new AirPort Extreme will not turn on anymore, no lights when plugged in.

My new AirPort Extreme will not turn on anymore, no lights when plugged in. I just bought it a few days ago. It has been working fine. I left the house for most the day and when returning home it would turn back on. I have tried to plug it into other outlets...nothing, I've tried the reset button...Nothing.

That is reported here a few times.. just take it straight back to apple or place of purchase for immediate exchange.

Airport Extreme will not show USB drive installed Solved!

Airport Extreme will not show USB drive installed Solved... At least for me!
Here's what I had to do to make it work with the newest 7.3.1 firmware.
Ready for this? No Joke Really!
1. Connect your USB drive to the Airport Extreme.
2. Turn it on.
3. Open the Airport Utility.
4. Go to Manual Setup.
5. Choose Disks and File Sharing.
Yep, we are going to set file sharing before we even see the disk we want to share!
You (I) had to set File Sharing on and Share Disks over Ethernet checked as well as set the Work Group (In my case). THEN restart the Airport Extreme.
After it re-started... My USB Drive was now present and ready for use.
I also dis-allowed Guest access. I re-started ALL computers in my network, both Windows and MAC. The USB drive held and works GREAT!
I know... Most of you thought this was a joke, It's not!
I tried everything to get the USB drive to work and failed every time just like most other people. Doing it this way worked like a charm.
Go Figure huh!
Hope this helps someone with this issue.
Message was edited by: DonaldH

How was the usb hard drive formatted? Was it NTFS, FAT32, or HFS+?

Can I turn my airport extreme when not in use?

can I turn my airport extreme when not in use?

Why?
The power saving will be negligible, and it may take time to re-establish a connection to your ISP's Network.

Airport Extreme N not working with a PC

As the title notes, the PC I'm trying to set up will not connect with my Airport Extreme N, it's trying to connect through a USB WiFi adapter (no built in WiFi or WiFi card). When I turn all security off on the Airport Extreme N it will connect easily, but when I turn WEP back on it will not connect. When WEP is turned on it also claims that the wireless network is a WPA network, which I think might be the issue (the fact that its reporting different security).
The PC is running Windows XP Service Pack 2.
An iBook G4, PowerBook and Macbook all have no difficulties connecting. An old iBook G3 (with 802.11b Airport card) is also reporting that the network is WPA encrypted (but I believe that its airport software might be outdated)
I could obviously change the security on the AEn to WPA but I would be unable to connect my Nintendo DS to the WiFi network then, as it only accepts WEP keys.
Anyone got a clue?

What does a Windows compatible password entitle?
I've also tried the hex equivalent of the password, and it wouldn't take that either.

PC file sharing over Airport Extreme does not show up on Mac

I have two PCs and a new Macbook Pro with a new Airport Extreme (AE) base station. All 3 computers can access the Internet through the wireless AE. Hooray! But file sharing that is turned 'on' on the PCs does not show up on the Mac. For that matter, neither PC sees the other PC's shared files, either.
Now here's the really weird part... When I network through an Ethernet router/hub and don't use the AE, then all 3 computers see all the shared files and directories. I suppose I have something configured incorrectly on the AE network, but I haven't a clue what. Can you help?
Mark

Here's how to find IPs on various machines, including Windows® varients...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
What to do once you know them, assuming the first 3 numbers are the same for the PCs and Mac... from the Mac, use Go>Connect to Server, then type in smb://, then the actual IP of a PC... let us know the results.

Existing files on drive connected to latest Airport Extreme do not show up, however files copied over the air to the drive do. Any ideas?

I have the latest Airport Extreme with a Seagate drive connected. I copied files to the drive while it was connected to my MacBook Pro. The files do not show up when connected to the AE, but they appear when connected to the Macbook, Files copied over the network to the drive appear. The drive is formatted HFS+.

After playing with this for the last few days, I found a solution. Under the "Disks" tab in Airport Utility, the "Secure Shared Disks" drop down needs to be set to "With device password". Mine was set to "With acounts", which even after correct authentication, none of the files would appear.
Another interesting note: The files that I could see, the ones I copied over the network, do not appear now. I can copy over new files, and they show up, but the ones copied prior to changing the "Secure Shared Disks" option, do not.

New AirPort Extreme will not connect to internet

Purchased AirPort Extreme to replace older D Link 655 router. All of my Apple gear has been plug and play except this
Extreme router. I cannot get an internet connection to save my soul. I tried connecting thru both my MacBook Pro and my HP Pavilion dv6. I just assumed I could move the ethernet cord from the DIR-655 to the AirPort and all would be fine. Not so. I have reset, unplugged and restarted so many times I lost count. Nothing works. What am I doing wrong. I even swapped out at store where I bought thinking I had defective router. any ideas? My wife works from home and I really need a better router with greater reach and thought this was it. Please help.

Simply restarting the modem will not always allow it to reset correctly so that it will issue a new valid IP address to the AirPort Extreme.
Power off the cable modem completely for at least 30 minutes....longer will not hurt. Be sure to unplug the power cord from the back of the modem or unplug the power cord at the AC wall jack. If the modem has an easily accessible battery, pull the battery.
Power off the AirPort Extreme as well.
After the modem power down period, insure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme. Reinstall the modem battery if it was installed previously.
Power up the modem and let it run for 10 minutes by itself.
Then power up the AirPort Extreme and let it run for a few minutes. Check to see if the Internet connection is working correctly now.

New AirPort Extreme will not Connect to iPhone 5

I just upgraded my old AirPort to an AirPort Extreme. Everything seems to be working fine, except my iPhone 5 will not connect to the new Airport. When it is selected as the new wifi option, the connection wheel just spins and spins and it will not connect to the wifi.

Reset the airport to factory and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
In the new setup, keep all names short, no spaces and pure alphanumeric.
eg AEgen6 for base station name.
Since you have issues with wireless name the bands differently.. AE24ghz and AE5ghz
Set no security to begin with.. Set 2.4ghz to channel 11, 6, 1 in that order.
Once the iphone connects.. please set WPA2 Personal security with a pure alphanumeric password of 10-20 characters.

Airport Extreme will not connect to Internet

Just purchased an Airport Extreme Base Station (AEBS) to upgrade old Netgear router. Netgear was working perfect with both wired and wireless internet. My ISP is a rural internet high-speed wireless company. It is not DSL/Cable or Satellite, requires an antenna on a tower, can try to find out more details if it helps. Previous settings were referenced on the old router and DHCP is used to identify what is static IP provided by company.
After several attempts at installing AEBS: green light is on, wireless network is successfully created, but internet cannot be accessed in either wired or wireless mode on any device. Interestingly, the IP address that the AEBS uses DHCP to find is DIFFERENT from the IP address found by the old router. I have tried several different configurations of the manual setup, including manually entering the IP address, but when I try this, it also asks for a router address and nothing I put in seems to satisfy the utility's requirements.
I played with so many settings and restarted my computer so many times that each time I try things, I reset the AEBS to default and start from scratch. I've done this about 10 times.
I'm at a loss. ISP wants nothing to do with this because the old router works, I would like to use the apple product (with some express(es) to extend range), but I'm unable to get this to function.
Any help would be appreciated.
I am not running a Mac desktop, if it matters. Using the airport utility for windows on home-built PC. No device will work, however, having tried wifi on iPhone, iPad, Laptop and other desktop.

I hope this helps. I don't own an Airport Extreme but an Airport Express and here is what I did:
Perform a Factory Reset, by disconnecting the AE, once unplugged proceed to push the Reset Button and then, without releasing the button, plug it again to the power source and wait a few secs till the lighs begin to blink. Now you can release the Reset Button.
After that, the Airport Utility should detect it. Here is what you have to do. As you want to use it as Router, you have to:
1.- Click on: Manual Setup
2.- Fill your data for the Airport Extreme, like password to access it and the name of the base station
3.- On the Wireless tab, select Create Wireless Network and allow the security on it and key to access it and all the wireless variables you want to include.
4.- Allow Wireless and Ethernet clients to be able to connect and make an updation of your configuration
Note: If you are going to use multiple clients for wireless, then you have to go to the Internet button at the top of Airport Utility and select DHCP to distribute the IPs manually.
That should be all from Airport Utility. The other side you have to check is your Windows configuration.
I hope this helps. If not, please share more details after you try step by step the instructions I pasted here.

Airport Extreme? Or not? No clue!

Similar Messages

Maybe you are looking for