Airport Extreme or stay with Netgear?

I have a MacBook Pro, my husband has a pc. We want to set up our computers so we can share files and also have access to a wireless/external hard drive. Currently we use Netgear and a Motorolla Modem (I think that is what they are called). Well, like many other people, we are not computer literate regarding the insides and hook up etc. What is your advice? Can we do what we want with our current equipment or should we get the Airport Extreme and a new Iomega 2T hard drive?
Also, who can we call to come out to our house and help with the set up and answer our questions? My husband says GeekSquad but I think they know very little about Apple. I have tried to do these things myself with our current equipment but I think what I did instead was open access to our internet and computers to anyone. Oooops. Any information you have is very much appreciated. I am in the Twin Cities area if you have any recommendations. Thanks again.

Hello jocelyn33. Welcome to the Apple Discussions!
If your current networking equipment is working for you, there should be no need to replace anything. It sounds like you are just looking for assistance with how to share files between Macs & PCs ... correct?
Both systems have the means to share folders & files and it should just be a matter of configuring them to do so. There shouldn't be any configuration changes necessary on the router or modem to accommodate this.
I'm afraid I can't make any recommendations on home computing service, but I'm sure there are plenty of folks in the Apple Discussions that will be happy to answer any questions you may have even if it doesn't specifically relate to Apple equipment.

Similar Messages

Airport extreme configuration problem with Netgear DG834PN

Good morning,
I have a problem. I bought an AEBS via the WAN port to connect to my Netgear DG834PN.
I turned off the WiFi on the Netgear, I connected the AEBS in bridge mode, but with the iMac and other iDevice there are no problems.
On the contrary my Acer Travelmate (Win 7) does not want to connect ... fact is connected, the card tells me that is connected and has access to the internet, but does not show mewhen I browse any web page, Skype does not connect ...
Do you have suggestions for configuring the Netgear or dell'AEBS?

The Windows Firewall may be blocking the connection attempt. I have not used Windows 7, but on an XP machine, the Firewall settings are in the Control Panel. Check to see if this might be the case so you can "Allow" an "Exception".
The anti-virus software may also be blocking the connection. You may need to turn it off for the configuration, then turn it back on.
It will often help to try to configure the device using Ethernet, not wireless. Connect a spare Ethernet cable from your PC to one of the LAN <-> ports on the AirPort Extreme. Restart both the PC and AirPort Extreme, then open AirPort Utility again.
If still no luck, click the AirPort Utility File menu at the upper left hand corner of the screen and select Configure Other. Enter 10.0.1.1 into the address box and "public" (without the quotes) in the password box.

Using Airport Extreme (802.11n) with Netgear Wireless Modem Router

I have a quick question, can I use the Airport Extreme in a wireless modem router?(http://www.netgear.co.uk/wirelessadslrouterdg834g.php)
By plugging the Airport into the Netgear router would I be able to by pass and run a network this way. I have a 802.11n enabled MacBook and Apple TV, the Netgear is the weakest link!!!
Many thanks.

neptune2000's post was implying that you connect the AirPort Extreme base station (AEBS) to the Netgear.
The AEBS does NOT contain a modem. Therefore you will need a modem, either the Netgear or another.

Best way to use Airport Extreme dual band with Netgear FR114P?

Years ago a friend connected via ethernet our G4 (10.4.11) and an old Blueberry iMac (10.4.11) to a Netgear FR114P Router(?) which is connected to a modem from TimeWarner Cable on our second floor. We also have an ethernet connection downstairs for a Windows XP laptop. We can all get on the internet easily, but we have never been able to connect wirelessly or to let one printer serve everyone in the house. My grandchildren now all have these wonderful Apple devices (iPhones, iPads, iPods, Macbooks), and I would like them to be able to connect wirelessly, and I would like to have a real network so we can all use the printer and scanner, but still preserving the integrity of our hard drives. We just bought 2 refurbished iMacs, an Apple Extreme Base Station (dual), and an Apple Express access point. How best to proceed to achieve the desired outcome? If the language is not too technical, I think I’ll be able to follow the directions.
I am reluctant to mess with the Netgear connection which is working. I am hoping I can remove the hard-wired G4 and put the 27” iMac in its place. Then, I am hoping I can connect the AEBS to the Netgear router and somehow magically create a situation wherein all the computers & some of the devices can talk to each other and to the peripherals wirelessly? Is that possible? I’ve read some of the discussions, even one about a Netgear FR114P, but it was dated 2007 so I’m not sure it applies to my situation. Should I just get rid of the Netgear? I don’t want to spend 20 hours without any kind of internet connection and get into a frustrating situation as one of the previous writers did. I am happy to proceed methodically and get it right the first time. Thanks so much for reading this long-winded thing. If this problem is already recently addressed in this forum, perhaps you will be kind enough to give me the link.

Years ago a friend connected via ethernet our G4 (10.4.11) and an old Blueberry iMac (10.4.11) to a Netgear FR114P Router(?) which is connected to a modem from TimeWarner Cable on our second floor. We also have an ethernet connection downstairs for a Windows XP laptop. We can all get on the internet easily, but we have never been able to connect wirelessly or to let one printer serve everyone in the house. My grandchildren now all have these wonderful Apple devices (iPhones, iPads, iPods, Macbooks), and I would like them to be able to connect wirelessly, and I would like to have a real network so we can all use the printer and scanner, but still preserving the integrity of our hard drives. We just bought 2 refurbished iMacs, an Apple Extreme Base Station (dual), and an Apple Express access point. How best to proceed to achieve the desired outcome? If the language is not too technical, I think I’ll be able to follow the directions.
I am reluctant to mess with the Netgear connection which is working. I am hoping I can remove the hard-wired G4 and put the 27” iMac in its place. Then, I am hoping I can connect the AEBS to the Netgear router and somehow magically create a situation wherein all the computers & some of the devices can talk to each other and to the peripherals wirelessly? Is that possible? I’ve read some of the discussions, even one about a Netgear FR114P, but it was dated 2007 so I’m not sure it applies to my situation. Should I just get rid of the Netgear? I don’t want to spend 20 hours without any kind of internet connection and get into a frustrating situation as one of the previous writers did. I am happy to proceed methodically and get it right the first time. Thanks so much for reading this long-winded thing. If this problem is already recently addressed in this forum, perhaps you will be kind enough to give me the link.

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Does Airport Extreme work will with AT

Does Airport Extreme work will with AT&T Microcell for the iPhone 4?

The AT&T Microcell will plug into one of the Ethernet ports on your AirPort Extreme.
The AirPort Extreme will work just fine. Whether the Microcell works well is totally up to AT&T.

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

Airport extreme quit working with mac,dell etc.digital cable the issue? or?

Hi! I had luck here before, so I'm hoping I can find luck again! I'm with my folks, who run a Dell Desktop with WIndows XP Home Edition with cable modem, my Airport Extreme running wireless with my Macbook (listed) and an older than old dell notebook with a wireless card. It has been running fine for the last year.
Now, the new problem: My parents upgraded their phone to digital- so for the first week or so, every time the phone rang, I lost wireless- I presume from interference. On Monday, I was online, and was abruptly cut off. I was not able to get on again for the rest of the day. As sometimes the cable goes out- I didn't think much of it. Until the next day when I couldn't get back online, and the dell desktop could not get on either. My father called in to TW who walked him through several different solutions- none of which gave me wireless. I'm left with an old dell desktop to work on- (I'm a mac girl- I'm going insane). I need the stuff on my macbook- job applications to be sent, book writing for uploads- and my sanity back. Is it possible my Airport Extreme went? Is it the modem itself? Is it the wireless phone interference? My mac will show it can see the network- but can't connect to the internet- Any help at all will be greatfully accepted!
Thank you!!

What is the make/model of the new modem?
Since it sounds like your parents now have VoIP as their phone service, it might more likely be a bandwidth issue as opposed to a Wi-Fi interference issue that you are seeing. This would make sense since the Dell desktop is not able to connect to the Internet either.
One thing to try is to perform a complete power recycle of all the network components to see if this resolves the issue of connectivity. The simpliest method would be to first power everything off. Then, starting with the modem, power it back on; wait 10 - 15 minutes, and then, power-up the AirPort Extreme Base Station (AEBS); wait 5 - 10 minutes. Finally, power on the computers.

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

How to configure airport extreme to work with Actiontec gt701d modem

I have been trying to set up a new Actiontec modem to work with a new Airport Extreme with no luck. I don't know what the right settings are to get it to work correctly. So far the only way I have been able to get the two to work together is to have the AE connect with ethernet and bridge mode. However with this configuration I can't setup a guest network which I would like to be able to do. I have read some past posts and have tried other configurations but end up either losing internet connection or getting a very slow connection. If anyone has some idea how to get this modem to work with the AE i would really appreciate some advice
Thank you

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

How to configure Airport Extreme to work with Spotify

Issue: Spotify no longer syncs Spotify files to my iMac or my iPhone despite me being a premium member. I've never had an issue with this until this past week. I can't see anything that has changed but I must be missing something. Anyhow...I'm posting this here because I need assistance with my Airport Extreme configuration (not Spotify).
According to Spotify, I am to configure my (Airport Extreme, latest gen) router to allow the following:
The following IP ranges should be open on port 4070:
78.31.8.0/21
193.182.8.0/21
The number 21 is the prefix length.
I've assigned the static IP to my iMac and my iPhone. I've also forwarded port 4070 (Public & Private UDP and TCP) to my iMac's static IP. I also tried it on my iPhone. What I don't know about is how to open the IP Range on that port as stated above.
Any idea where this can be done? Thanks!

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

Airport Extreme 802.11n with Nortel VPN client

Hello,
Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

I had the same problem and an apple apple care tech walked me through it yeterday.
Call them, they were great.
JK

Airport Extreme or stay with Netgear?

Similar Messages

Maybe you are looking for