Airport extreme printer connection

I have 2 macs and to pc's running XP connected with airport extreme. 2 hp printers also connected. the internet connection works fine for all. macs can print with no problem. the XP's are connected but the printers work sometimes and then do not work. I am able to get them re connected eventually but that is not a long term solution. Why do the printer connections keep fAILING???

Check out http://discussions.apple.com/message.jspa?messageID=8883084#8883084
It describes a Vista/AirPortExpress installation, but should be relevant to XP.

Similar Messages

  • AEBS Airport Extreme Printer connected by USB not recognized

    My in-laws literally just bought a brand new AEBS yesterday. Plugged it in, the the Canon MX7600 multifunction printer into the AEBS usb port. My in-laws old Windows PC is connected to the internet via an ethernet connection to the AEBS.
    1. PC can see printer and prints fine, no problem
    2. AEBS cannot see printer using Aiport Utility v5.4.2 and the AEBS firmware version 7.5 when using in-laws brand new MacBook Pro which is connected wirelessly to AEBS.
    Can anyone out there help?

    Have you tried the steps in "Printer troubleshooting for AirPort Base Stations and Time Capsule".
    And you are aware that you will only be able to print... right? The USB port on the AEBS does not support FAXing nor scanning.

  • Sent wake-on-lan command will reset airport extreme internet connection?

    hi,
    I have a problem with my airport extreme.
    1, My airport extreme is set always stay connected to internet.  If I reboot my airport extreme, it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
    2, if I sent a wol command to my NAS, airport extreme internet connection will be reset. it can not update my airport extreme global host name to my DNS, I need to reconnect manually.
    zhi

    Derek-
    Since I could not find an answer on the support site. I contacted Apple Support. Once I explained the symptoms the tech seemed to know exactly how to address my issue. I will explain what happened in hopes that it will assist you. It seems that the issue has to do with the type of wireless network security set up in the Airport Extreme that conflicted with the Vista notebook's wireless adapter.
    The tech had me launch Airport Utility, log into the Airport and Click on the Wireless. First he had me change the Radio Channel Selection from Automatic to Manual and changed the 2.4 GHz channel to 9 (from default 11) and the 5 Ghz channel to 157. The wireless security was set to WPA/WPA2 and he had me change it to WEP (Transitional Security Network) and I entered a 13 character key.
    This resolved the internet connection issue with the Vista laptop immediately, but now I cannot print to my wireless Lexmark printer. I have a support email to Lexmark. It seems that the Lexmark driver/software only lists WPA in the install dialog and does not include WEP. My guess is that this is the source of the problem.
    I hope this helps.
    -Eye

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

    my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

    No, not unless it is simply a network connection.
    How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
    Is the TP-Link ADSL?
    Is the IPTV using a separate voice channel on adsl?
    Or a different vlan.
    Sorry but it is something where a definite answer is not possible unless you provide all the details.
    The setups are unique to each ISP around the world..
    Here is one for our local ISP.
    http://www.avenard.org/iptv/Setup.html
    He has a section on getting this working with apple router over wireless.. look
    http://www.avenard.org/iptv/IPTV_and_Wireless.html
    Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

  • Airport Extreme wont connect too my router

    Airport extreme dosent connect to my router via my ethernet cable, i just get a orange flashing light. Do i need to configure my router?

    The ulitity program need to be updated after downloading its all sweet now. I just have too FAT 32 my External HDD and it will be fully operational

  • Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected?

    Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected? I'm told that it's better to only use the WiFi capabilities of the Extreme and leave the Bigpond to feed to the extreme.

    No, bridge mode would not be the correct setting for this.
    Instead, look for a "wireless settings" tab or page that will provide the option to turn off or disable the wireless radio of the BigPond router.
    If you are still having difficulty, it would be a good idea to post your question on a BigPond support forum or contact your Internet Service Provider.
    Contact Technical Support - BigPond

  • AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

    My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
    What am I missing here?

    Hi Pete Mackie-
    Nope. You aren't missing anything.
    Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
    Luck-
    -DaddyPaycheck

  • Devices not connecting through Airport extreme wired connection

    Hi
    I just got an Airport extreme to use as an extention of my existing network, and to plug some devices in so that they can connect to the internet for updates (Sony Blu-ray player, dish network receiver, slingbox)...
    my wireless is from a linksys/cisco wireless router (4-port) wrt310n, that is connected to my cable modem. The airport is set and has the green light showing. The blu-ray player and dishnetwork receiver are plugged into two of the ports. The blu-ray player says it can't connect to the internet. The dish network receiver says it is connected, giving ip address/submask, etc.
    If I take my macbook pro and turn off wireless and plug into the airport it will not connect to the internet.
    What have I not done to allow wired connection to the airport extreme to connect to the net?
    thanks
    David

    Thanks for the clarification of your setup.
    Unfortunately, the bottom line here is that this is not going to work.
    The ethernet ports on the Extreme will only be active if you configure the AirPort Extreme to "extend a wireless network". But, it can only "extend" a wireless network from another Apple router. It's not compatible for this purpose with your Cisco router or any other manufacturer's router.
    If you are unable to connect the AirPort Extreme to your router using an ethernet cable, you might want to take a look at a pair of ethernet powerline adapters to accomplish the same task by using the wiring in your home to transmit the ethernet signal.
    I should clarify that if you connect the Cisco and AirPort Extreme using ethernet, you would not use the "extend" setting on the AirPort Extreme. This is only used if the device is connecting to another Apple router.
    Message was edited by: Bob Timmons

  • Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

    Will a WD hard drive work with Airport Extreme to connect by a iPad Air

    If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
    If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
    assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
    Always the best way to find out.. try it.

  • Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

    repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook  up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

    Diane,
    I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
    *+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
    Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
    All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
    If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

  • Cannot get my new AirPort Extreme to connect. Tried everything the manual suggests. Old router works fine.

    AirPort Extreme will not connect--have tried everything manual suggests.

    With what device will the AirPort Extreme not connect?
    What is the make and model number of this device?
    If this might be a cable modem, you do know that the modem needs to completely reset before it will communicate with the AirPort Extreme, correct?

  • Airport extreme will connect to some iPhones and iPads, but not all, and will not connect to MacBooks.

    Why will the airport extreme not connect internet to macbook or some iPhones? It will connect to all our iPhone 6's and iPads but not to the MacBooks. The macbook says wi-fi has the self assigned ip address of ___,____,____,___ and will not be able to connect to the internet,

    Have you done a full restart of the network in correct order?
    Shut down everything.. OFF not standby.
    Power on in order.
    Modem.. wait 2min
    Router.. (Extreme??) wait 2min
    Macbook.. Only the Macbook.. do restart anything else yet.
    Any luck??
    No luck reset the Extreme to factory and redo the setup.. this time use all short names, no spaces and pure alphanumeric. Bonus for names <10 characters.
    Use passwords with the same rules.. only can be 8-20 characters.. mixed case and numbers.
    Try again with the Macbook..
    No luck give explicit details of the setup of the whole network.

  • How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver

    How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver?

    Depending on how you have your AirPort Extreme configured to work with the satellite receiver, it may or may not be possible to enable the Guest Network function.
    We will need to check some settings on your Mac or PC, but in order to do that, we need to know what operating system you are using on your computer.
    If you have a Mac, click the Apple icon in the upper left corner of the computer screen, then click About This Mac. Post back with the OS X Version number that you see there.

  • My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro.

    My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

    My Windows Airport Extreme wifi connection keeps dropping on a partitioned MacBook Pro. I have read many online threads without a solution. Do you have one?

Maybe you are looking for

  • How to read data from the excel file using java code.

    Hi to all, I am using below code to getting the data from the excel file but I can't get the corresponding data from the specific file. can anyone give me the correct code to do that... I will waiting for your usefull reply...... advance thanks.... i

  • X1 Carbon is the worst thinkpad I have ever had - think before you buy

    I just got X1 Carbon. Let's make it clear that this notebook is not worth the money. X230 is probably much better choice. You will get much better notebook with better hardware, better battery time, better size. It is not worth to buy X1 just because

  • Regarding conversion of Image file to video file

    Hi All, I need a small help. My requirement is to convert a text file in to an image file by attaching a background and that image is converted into video file by attaching audio file. please guide me how i can achieve this using sun java API. Is thi

  • Oracle 11g install hangs on windows 7

    Hi, I have downloaded Oracle 11g r2 64 bit install onto my windows system. When i install, the install hangs after selecting the following a) Create and configure a database b) Desktop Class After these, when I click on Next, the UI hangs. Help will

  • Need help on Reading BFILE, CLOB

    Hi all i am using Linux fedora 4 i have created a directory create directory clob_dir as '/db10g/my_dir'; and created a table from examples of a book i have CREATE TABLE BFILE_DOC (     ID INTEGER,      BFILE_CLMN BFILE And a procedure to read a text