Airport Extreme security concern with Airport Utility App

Just bought the new Airport Extreme (802.11ac) last night. BY FAR the easiest wireless setup I have ever done (< 5 minutes). Hats off to the Apple developers on this one - they crushed it! One of the things that makes this device so easy to setup though is the iPad/iPhone Airport Utility app. I used the iPad version.
My concern - When I startup this app it goes straight to the main config screen. Just tap on the Airport Extreme image, then tap Edit and I'm into my wireless settings (id's, passwords, etc.). And that's my concern. It didn't ask me for any kind of password to get into the utility, or the settings. What's to stop someone else from using my iPad to get into the wireless settings, or from someone else installing the app on their iPad and getting into my wireless settings.
It feels like this is a huge security hole. Am I missing something?
Thanks in advance - MarkInColo

Is there a way to lock down the app on my iPad so that the settings can't be accessed unless I authorize it?
No
Only way I can think of is uninstall the app, and install it again only when I need it. Isn't there a better way?
If it were me, I would not install or use AirPort Utility for the iPad, iPhone etc. Use only AirPort Utility on your Mac, and do not enable the option to have KeyChain Access remember the password.
Then, anyone who wants to access the settings in AirPort Utility on the Mac will have to enter the Base Station password to be able to make any changes in AirPort Utility.

Similar Messages

Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

Airport Extreme 802.11g with Airport Express 802.11n Aiport Express

I have An Airport Extreme Base Station 11g and an airport express 11g and I needed to buy another Airport Express but this one is 11n and my Airport Utility does not see it. Are these new Airport Express backward compatible? The reason is the kids X-box needs the ethernet jack that the color printer uses.
Can anyone help?
Thanks!

Thank you!
I followed your advice but so far I have been able to make some progress. I went out and bought the Airport Extreme 802.11n as I needed a router too so I like the features on the new one. So I think I have made a complex situation worse, LOL.
So far, the new airport utility can only see the new & old Airport Extreme but cant see the Express-g or express-n airports as they continue to blink amber.
What do I am I doing wrong?
thx

Airport Extreme (802.11n) with Airport Express/Extreme (802.11g/b) ?

If the 802.11n airport extreme is the main router, and used in conjunction with older airport extreme/express (single antenna); what will happen?
Will the network drop to the 802.11g speeds?
Will the benefits of MIMO be lost?

According to this Macworld.com article:Once you add 802.11g or 802.11b devices to the network, the performance of the entire network will be affected; it won’t be reduced all the way down to the slower performance of the respective older standards, but performance won’t be as fast as a single-standard network. (And 802.11b devices will affect performance to a greater extent than 802.11g devices will.)

Extend Airport Extreme 802.11g with Airport Express 802.11n

I bought a new AE 802.11n and I want to extend my network from my old Airport Extreme 802.11g. I can't figure out how to do this.

Unfortunately, the newer "n" AirPorts and older "g" AirPorts are not compatible if you are trying to configure the AirPort Express to "extend a wireless network" using wireless only.
The "extend a wireless network" function and feature is only found on newer "n" AirPorts.
If you can connect the AirPort Express to the older AirPort Extreme using a permanent wired Ethernet connection, it is possible to configure the Express to provide more wireless coverage that way.
Using an older, very difficult setup called WDS, it might be possible to configure the Express using wireless only, but the end result would be a network that provides only half the speed of your older "g" AirPort Extreme, so this is definitely not recommended due to the severe performance drop that will occur on the network.

Discovery issues with airport extreme and issues with airport utility

I lost about 3 hours with connection issues while trying to add a second airport express. The airport Utility couldn't find any of the units anymore. After aging a couple of years and checking lots of forums (many suffered the same problems) I found this link
http://support.apple.com/kb/HT1406#
Which seemed to help me reset the units and find them again. Though I can't be certain if it was just luck, the airport utility and detection and resetting of the express and extreme seemed solved.
I would add that this is an area that should be looked at by apple. It is not the first time that I have problems with the airport utility or the extreme.

Check the cabling to the Base Station - make sure the modem is plugged into the Base Station's ethernet WAN port (ie the port labelled with the "circle of dots" icon).
With the modem cabled to the Base Station - pull power to both for five minutes or so. Then plug the modem into power and wait a minute. Then plug the Base Station into power and wait a minute. Then try internet access again.
If that still doesn't work:
- on the Mac which can successfully connect to the internet when cabled directly to the modem, tell us what settings are found in System Preferences->Network->Show ethernet built in->PPPoE tab, and under the TCP/IP tab.
- from either a PC or the Mac connected to the Base Station, run the Airport Admin Utility, select the name of your base station, click Configure, click on the Internet tab. Tell us what settings are found under that tab.

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

New airport extreme not recognized by airport utility

I've got a 2011 MBP. Right now I have an older Airport extreme up & working with my Time Warner cable modem. When I tried to connect my new 802.11n airport extreme, I couldn't get it to stop blinking amber. First the airport utility told me that I didn't have a valid IP. The second time, after unplugging everything (cable modem & plugging it back in & resetting the airport, the utility couldn't find the router at all.
The manual says contact your cable company, but I got someone who's only solution was to go to system preferences/network & see if "airport" was checked. The second time after specifically asking for someone who understood macs,I got a bit more useful info, but it still doesn't work. I've unplugged everything countless times, reset the airport extreme, renewed the DCHP twice, restarted the computer & swapped out the ethernet cable. Still no luck. Any ideas?

http://support.apple.com/kb/ht3728

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

Airport Extreme randomly disappearing from Airport Utility

Dear All,
We've got here 32 AirPort Extreme Basesations, all with firmware 7.5.2. They are setup for Radius via Server Admin and linked to the OD Master. The basestations work fine except that they drop randomly from the list of basestations in the Airport Utility. They appear to work fine however it's very frustrating that remote access gets lost from time to time. The only solution then is to go under the ceiling and restart them. The units are configured identically and have it's own hostname defined via DNS and the tickbox is on for remote access via Bonjour.
Does anybody has seen this? Especially if configured via Server Admin to authenticate via Radius?
AirPort Extreme has no console login either, that would enalbe us to remotely login and restart the device.
Thanks,
Alex

I had the same problem. I figured out what the problem was when I answered the phone while I was using the computer. My 2.4ghz phone matched the freq with the AirPort, and it killed it every time the phone was on. It took me a few months before I figured it out. Try making a call when you can see the signal meter on the computer. If you don't have a 2.4ghz phone, ask your neighbor. It could be their phone.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Does Airport Extreme work will with AT

Does Airport Extreme work will with AT&T Microcell for the iPhone 4?

The AT&T Microcell will plug into one of the Ethernet ports on your AirPort Extreme.
The AirPort Extreme will work just fine. Whether the Microcell works well is totally up to AT&T.

HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
(65132)

Airport Extreme security concern with Airport Utility App

Similar Messages

Maybe you are looking for