Airport extreme signal drops when/after using Skype

I used Skype-to-Skype twice yesterday and both times the wifi signal from the Airport (802.11 n /square base station) started to attentuate and then completely disappeared. In both cases, I had to turn off and re-power the Airport base station to get my wifi working again and to maintain full strength. Regular internet usage has not caused this problem. We do not use Skype often and, of course, I could be mistaking coincidence for causality but this problem has not happened before. I get my high-speed internet from my cable company; perhaps they are doing something to discourage Skype/VOIP???

I am having the same problems, I was using a standard TP-link router and upgraded to AEBS, now it takes up to 7 tries to get a stable (?) connection with the AEBS. If anyone has any ideas it would be great.

Similar Messages

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

Airport Extreme: Internet working when directly from modem to computer, but not when using airport extreme. i have hit the reset pin and now do not know what to do.

Using Airport Extreme:
- Internet working when directly from modem to computer
- Internet NOT working when modem is connected to AE
- Internet NOT working when modem is connected to AE and AE is connected to computer
- I have hit the reset pin
Now what do I do?
(in advance - lots of love to anyone who helps out)

What sort of Internet connection do you have and who is your Internet Service Provider?
What is the make and model number of your modem?

Airport Extreme Signal Weaker than Before

My Airport Extreme signal is weaker than it used to be. Nothing has changed except I can no longer connect to the internet without running diagnostics each time I try to use it. It will connect and then stay connected until my macbook goes to sleep. When it wakes up, I have to re-connect using diagnostics.
I am using it in the same room I always have and never had problems before. But for the past several weeks, it is just not behaving as it always has. I have checked for a firmware update, but airport utility doesn't indicate that one is available. It's running: Version 6.3.2.
Any advice would be greatly appreciated. It's run great for the past several years. This is a new issue...

Because I can no longer connect to the internet without running diagnostics each time I try to use it. It will connect and then stay connected until my macbook goes to sleep. When it wakes up, I have to re-connect using diagnostics.
I am using it in the same room I always have and never had problems before. It will connect without problems in other rooms that are closer to the base station. But from the room where I ordinarily connect, it won't automatically connect anymore.
I can get it to connect from that room, and it will stay connected, but I can only do so by running diagnostics, telling it to assist me and then selecting the network and and following the steps to connect.

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

How is payment made when I use Skype to call abroa...

Can someone explain to me how the payment is made when I use skype to call abroad?
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

Hi, Brianbarry, and welcome to the Community,
Skype provides two methods of paying for outgoing calls to fixed or mobile numbers: a Skype subscription or Buy Skype credit. Skype-to-Skype calls are always free of charge.
In the case of Skype Credit, the cost of the call is debited from your balance as the call progresses. When you reach the equivalent of "2" in whatever currency your account is set to, the credit will attempt to "top up," or the call will drop. In the case of a subscription, the subscription covers the cost of the outbound calls.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Airport Extreme: trying to make WDS using 5GHz n only

I'm trying to make the fastest wireless backbone for my connection to the living room media center PC. I've picked up 2 Airport extreme n units and after some time managed to get them working via WDS (main and remote).
I still get choppy throughput with playing video (dvr-ms format) files from the PC to VLC on the MacPro.
I checked the base stations and they are set to WDS 802.11n only (2.4 GHz) -- is there a way to make it 5 GHz only to maximize speed? It doesn't seem to be an option under WDS.

SteveW25561, Welcome to the discussion area!
Instead of using WDS use "Extend a wireless network".
Open AirPort Utility and select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password is necessary.
Click Update to update the base station with new network settings.
Explained on Page 45 of "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

My camera zooms in automatically when im using skype... 2009 macbook

My camera zooms in automatically when im using skype... 2009 macbook anyone have any suggestions.. thank you

Hi LynnAshley!
You may want to try reinstalling iPhoto by deleting it from your Launchpad on your MacBook Pro, then re-downloading it from the Mac App Store:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
You may also want to think about backing up your iPhoto Library first:
iPhoto 9.5: Back up your iPhoto library
http://support.apple.com/kb/PH15262
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Airport signal disappears when I use our cordless phone

Hi. I am running an adelphia premiere high-speed DSL modem into an airport extreme base station, which provides a wireless signal to an i-book and powerbook. I am also running a line from the extreme base station to a Vonage unit, for internet telephone, from which I use a cordless panasonic phone (KX-TG2216). It's a new set-up as we have just moved house. And I'm finding that whenever I use the cordless phone my airport signal disappears (icon goes to grey), and sometimes I even lose my base station network in the popup menu (necessitating finding it again on airport setup assistant). They're just not there... But they come back when I terminate any use of the cordless handset. Is it a hardware compatibility issue? Do I need some kind of firmware patch?
Any help gratefully received. Thanks!

simonherb, Welcome to the discussion area!
Your cordless phone uses the same 2.4 GHz that is used by the AirPort Extreme base station (AEBS). Therefore it is directly interfering with your wireless network.
You may be able to configure the AEBS to use a channel that works OK even when the telephone is in use.
A better solution is to get a cordless phone that does not operate at 2.4 GHz.

Does new Airport Extreme slow down when used with Airport Express?

Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.

The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

Airport extreme signal drops when/after using Skype

Similar Messages

Maybe you are looking for