Airport extreme stopped recieving signal

I recently installed a bunch of music software, mostly digidesign 002 plug ins etc, and up until today everything seemed fine - now i can't get any signal on my airport. I've tried lots of stuff but to no avail. anyone got any ideas?
g5 1.8 pci Mac OS X (10.4.8)

Hello stacy84. Welcome to the Apple Discussions!
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing you from getting a good clean signal.
I suggest you perform a simple site survey, using utilities like KisMAC, MacStumbler, iStumbler, or IPNetMonitorX to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.

Similar Messages

My Airport Extreme Stops working every evening...

Funny! My Airport Extreme stops working every evening at about the same time for 4-5 hours. I am assuming that there is some sort of "usage setting" that needs to be set. Unfortunately I cannot find that setting. Any help appreciated.

A windows 7 laptop is also not seeing the airport extreme wifi signal. So I have a Mac Book Air, iPad & wired devices connected fine. I have an iPhone 3Gs, an iPhone 4 and a windows 7 PC all failing to connect. They all connect fine to other wifi devices. They all connected fine to the Airport extreme until the recent problems started. I don't think it's an iPhone issue, therefore - more likely to be an issue with the Airport extreme?

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

What's the range of airport extreme can the signal reach my basement my house is about 2500 sq ft

Whats the range on the airport extreme is the signal strong enough to reach the basement of a 2500 sq ft home. Thx

The maximum free-space range is 150 feet; slightly more in the 5 GHz band. However, walls, floors, other electronic devices, microwave ovens, etc. will attenuate the signal reducing the range for actual use.
I live in a 2300 SF townhome and wireless works fine from an AEBS on the second floor. I use an Airport Express on the first floor in Extend mode that is configured for my Slingplayer. Apple TV2 does not seem to have any problems. It's also on the bottom floor.
This is a six year old home so the walls are not made of plaster. Plaster on metal lath can prevent AEBS signals from being detected outside of the room where it's located.

AirPort Extreme stops sending wifi signal

I have an AirPort Extreme. It quite frequently (like 2x per month) just stops sending a wifi signal. The light on the unit is green. As soon as run it through a power cycle it starts working again. This has been going on for about 6 months but it's really starting to get frustrating.

What model is the AE? Actual model number if flat.. otherwise just say tall.. !!
How does it fit into the network? Is it bridge or router or extend wireless?? You need to give some info.. no info .. we are guessing...more than usual.
Fix.. hmm... this is sort of feature now.. self-securing wireless.. it turns off to prevent access.
Fix by replacement..
Does it drop out on all devices or just your Mac?? If you run Yosemite.. the cause might be there.

Airport extreme stops itunes stream after 30 secs

Hi guys, I am on my second airport extreme now after getting a replacment one from apple. All i really want to do with it is stream my itunes to my hi fi. It didn't work straight out of the box as I was told it would. I set it up on MacBook Pro, brought it downstairs (no longer conected to my modem) switched it on, light eventually went green, found the device on my itunes, ran my music through it and it played for about 30secs, music cut off, the light on the Airport Extreme went to flashing orange and I have to restart the power up to get it back to green. And it does the same again when I try...
Any ideas whats giong wrong, this is the second device to do this...

Same problem but I'm not on shared library.
Only one MBP with iTunes library connected directly wired via firewire
to external HD. Audio out is wired from minjack on
MBP to RCA inputs on back of tv. Video is directly from MBP via DVI.
Frontrow and iTunes both stop after just a few minutes and tv reads "no input signal"
Audio stops at this point also. I usually have an a/v reciever connected.
System prefs have screensaver set to never. Frontrow I've tried setting off and on.
The only way I can have more than 2 minutes with the exception of iTunes wit fullscreen visualizer.

Apple Airport Extreme No Wireless Signal

Other than downgrading firmware, re-installing software or reinstalling an older OS (Windows style thinking), does anyone have a solution to this problem
I have an Apple Airport Extreme that has recently become useless because it emits or receives no radio signals.
I was running a Wireless Distributions System for a couple of years without any problems. The Extreme was the base connected by Ethernet to a cable modem. I had an Express as a relay station.
One day the Extreme stopped. Naturally, the WDS died. I played with the Extreme for a 1/2 day, but couldn't it too work. I made the Express into my sole Wifi base. Workable but not ideal, I now have dead zones in my house.
I finally found time to spend (waste) another day trying to get the Extreme working again. No luck. Some observations:
- the only useful advice I found to date, was to set the Extreme from automatic to a specific channel, the Extreme worked for about 20 mins. Strangely, my iBook couldn't find the signal, but my Dell PC could!
- I can get Internet access when use the LAN Ethernet outlet on the Extreme
- the centre status light is one, the LAN is on, the wireless is out
- Amazingly, at one point disconnected the LAN cable between the Extreme and my iBook, and launched the Airport Utility and it found the Extreme wirelessly!!!
- Not only that, but I could configure the Extreme wirelessly!!
- Yet during that time and after, the Extreme emitted no wireless signal - checked by Windows and Mac Laptop
- So if the hardware is emitting a signal that allows for configuration but not simple internet access, it is probably not a hardware problem and sure looks like a software problem, most likely between the OS and firmware.
- I have upgraded the Extreme to 5.7, many posts say go back to 5.5 but only a few claim this actually works.
- I am running Mac OS 10.3.9 on all my various Macs. Apple software updates are current.
This wave of posts reminds me of time when iBooks had a faulty motherboards. This looks like an easier fix, a firmware or software patch.
If anyone has a real solution, as opposed to an experimental one, I would appreciate it. Other posts recommend switching to more reliable third party hardware, I guess it might come to that.
Thanks.
iBook, Mini Mac, iMac Mac OS X (10.3.9)

Sounds like possible interference from a new neighbor's wireless network. Have you tried other wireless channels to see if you can find some clearer airspace?
AirPort Utility > Manual Setup > Wireless Tab (below the icons)
Hold down the option key on your Mac as you click on the Channel selection box to see more choices.
You might also want to download a utility like Air Radar to display all of the visible networks in your area. Click on Scan at the lower right of the main window. Look for the channels that other networks are using and set your router to a channel that is as far away as possible.

How can I strenghten a weak Airport Extreme (2nd Generation) signal?

I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away.
Here are the details:
AirPort Extreme 802.11n (2nd generation)
     Version: 7.6.1
     Wireless Mode: Participate in a WDS network
     Wireless Security: WPA/WPA2 Personal
     Channel: 6
     Connect Using: Ethernet
My Airport Extreme is on the second floor of the house and is connected to a D-Link DIR 825 router that is on the first floor.
Sometimes when I am on the second floor, I get a better signal from the D-Link router than from the Airpot Extreme.
How can I strenghten the signal?
Thanks in advance

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme
Information about the device will be displayed in the area to the right
The 3rd Generation product was the first Apple simultaneous dual band router, introduced in March 2009. Minor changes were made in the chipsets between the 3rd Generation and 4th Generation versions with some antenna improvements added in the 4th Generation versions as well. The 4th Generation version was introduced in October 2009.

IMac connected to Airport Extreme stopped detecting printer

Can't connect any more printer (Epson Stylus SX125) to iMac through Airport Extreme. Any solution?

GoldHill wrote:
USB Backup drive connected to USB port on Airport Extreme. Running system 10.5.5
On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time!! Anyway all is cool with that.
My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
yes, it should work. hard to say what's wrong. try the following terminal command. it should not be necessary but it should help.
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
One other important thing to mention. At first I plugged my new backup hard drive directly into the iMac with firewire 800. I started time machine and started the backup. I then stopped that backup and plugged the backup hard drive into the Airport extreme (USB port) I then trashed the partial backup folder off the backup hard drive. Is it possible that on the iMac there is still some TM file there pointing to the old original backup file??
have you emptied trash? you should. the files won't really be deleted till you do. there is one other hidden file but it should not be necessary to remove it.
Thanks.... any help is appreciated.

Airport time capsule, add Airport extreme for stronger signal

I have a new Airport Time Capsule set up and running. My old Airport Extreme (5th gen) is sitting unused. I'd like to hook it up because I can't get a USB drive to work off of the TC (according to posts here it requires a powered hub).
I've read posts about setting up more than one Extreme, but feeling overwhelmed by all the terms. Also, much of the advice, including articles here, pre-dates the TC. From what I've read, the version of Airport Utility makes a difference too. I have the latest, 6.3.1.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
Here's what I'm trying to accomplish. I live in a big old house with internal brick walls. I want to strengthen the signal throughout the house. One network, one password, security not a huge problem because we're rural.
I'm all Apple (Windows is banned from my house), and all software and OS up to date (10.8.4; I forget what cat it is).
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
Thanks,
Steve

Hi Again.. !!
There are two basic methods of connection.. wired by ethernet.. much the superior method to be used in every case possible.. (less gremlins!!). Even homeplug (EOP we call them here).. adapters are a better alternative to..
Extend wireless. This is apple terminology for what everyone else calls wireless repeater.
Wireless repeater as the name suggests.. picks up the wireless signal from a wireless source and retransmits it.. in the process it slows all transfers by half.. or more.. so it is inefficient.. only use where wire cannot be run.
Now to your specific question.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
If the verizon router is the main router of the network.. with the TC plugged in and working in bridge mode.. then you can plug the old AE into TC or verizon router.. it will make no difference. The TC is working as a switch and AP only.. so plug into one or the other both are handled by the verizon router which does not know or care where the devices are plugged in. There is one consideration.. the TC and AE are gigabit.. the verizon is likely to be 100mbit.. so if you can plugging into the TC will provide gigabit link. Only relevant to ethernet connected computer on the AE and TC talking to each other.
AE stand alone is useless to you.. in stand alone you connect to it but have no connection to the rest of your network or the internet.
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
If you connect by ethernet you set up roaming.
See http://support.apple.com/kb/HT4260
If by extend wireless you simply set the extend.. it is by its very nature nothing but a repeater so must use the same wireless name and password etc.

Very weak Airport Extreme Base Station signal...

Hi --
I've been searching the forums here for some solution but haven't been able to find anything. I'm trying to upgrade my parent's wireless network in their home and they've had an Airport Extreme base station for a couple of years now. I recently switched them to broadband which is much faster than the crappy DSL they used to have but the problem that still exists (one that they've always had) is an incredibly weak Airport Base Station signal.
I've tried using different laptops and computers on it, but all of them register the same weak signal. Having my laptop 12 inches from the base station only gives me three bars. From three feet away it drops to two and anything over six feet is a 1 bar or nothing and that's all int he same room. Trying to access it from an adjacent room is fruitless.
Like I said, it's like this for all computers I've tested. Anyone know what's up with this? Is the base station on the fritz? I have the latest software update for it as far as I know.
Thanks.

That's a good, helpful list but we don't really have any of those potential interfereces. Like I said, this signal is down to two bars from five feet away and only three bars from literally six inches away, so there's really not a lot of room for intererence from that distance anywat.
I've seen people wondering if the latest firmware update for Airport might be causing this, but I'm wondering if the Airport base station itself is maybe in the fritz. I guess I could try getting a new one. Anyone else out there have any other ideas?

Retina MacBook Pro is not connecting with Airport Extreme 5 GHz signal

I believe I have done my due diligence to find the answer to my question here and other places but I must be missing it. I have a Retina MacBook Pro that as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer. When I click on the Airport icon in the menu bar, it is indicating a 2.4 GHz connection. I have looked at discussions which say I can give separate names to to both the 2.4 GHz and 5 GHz signals. I can't seem to find that. I also read where you can reorder the order of signal preference. I can't seem to find that either. Interestingly, I have an Airport Express that is extending the network. When option clicking on its icon in airport utility, I can see both the 2.4 and 5 GHz information. I don't se that in the Airport Extreme. I am thinking about gettng the newest Airport Extreme but if I don't need to...
Thanks for any help!

as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer
A Generation 1 AirPort Extreme is not a simultaneous dual band wireless router. It can produce either a 2.4 GHz....or....a 5 GHz wireless network signal, but not both simultaneously.
If you want the Gen 1 Extreme to produce and deliver a 5 GHz wireless network, it can do so, but any 2.4 GHz devices that you have will not be able to connect to the 5 GHz signal.
A new simultaneous dual band AirPort Extreme will produce both a 2.4 GHz and 5 GHz signal simultaneously. Wireless devices will automatically connect to the best signal quality based on their capabilities and location in relation to the AirPort Extreme.

Airport Extreme keeps loosing signal

I'm pretty sure there's a couple of postings about my situation.
I have the airport extreme (white cone) connected to my Mac Mini and Macbook. I recently upgraded to the lasted updates. I noticed that my macbook keeps on loosing the signal and it wont recognized the airport extreme. After a while, it will recognize the signal and then loose it again. I have reset my airport by pressing the reset on the back of the airport extreme. I heard that i can downgrade on the airport and firmware..can you guys advice on what to do about my situation? thank you.

Change the DHCP-Lease-Time, that should help you...

Possible to add a non-Apple signal booster to Airport Extreme to improve signal strength?

Good day to you all.
This might seem like a weird question. I've just rencently purchased my first ever MacBook Pro to enter the Mac family
With it, I also bought an AirPort Extreme. Like others today, I've had a lot of trouble trying to get the thing set up. I somehow managed to get it working, but the signal strength in the far room of the house is too weak.
I suppose I could just get a better Wi-fi adapter for that computer to pick up the better signals, but, my question is:
I have a signal booster (repeater?) from Cisco/Linksys that I used for my Cisco/lynksys router. It would connect to the network and bounce that signal from that base off to improve the signal strength to the rest of the house. It worked like a charm. So, my question is is it at all possible to connect a non-apple booster like this to the network to bounce the signal?
I assume it would work, but thought I'd ask anyway just to be sure; to check if anyone else knows about this. I'm going to try sometime soon if this works, but would love to know what others think.
Thank you very much for your time and help!!

Ah, yes. Good idea. Well, in a few year's time, we'll probably move on to better devices, but, for those who do have something that isn't Apple...I encourage you to try it.
I'm using the Cicsco/Lynksys Range Extender that I believe is simply called RE1000; mine was refurbished, too.
Anyway, it came with a set up disc that I'm not entirely sure if it works on a Mac computer. I didn't try it.
You'll run the set up disc (somehow), make sure you follow the instructions on the screen, and it should allow the RE1000 to find the network you created using the AirPort. Once the set up is complete, it'll ask you to move the RE1000 to another electrical outlet in your house that can take the signal and bounce it to a wider area of your house, and presumably the neighborhood (secure your network).
Seemed to work without a hitch. So, if you're not using an Apple range extender (another AirPort type thing), hopefully this helps you. It did work for me, otherwise I would have taken the AP Extreme back for a refund haha

Why does my airport extreme stop issuing dynamic ip

On several occasions, my airport extreme 5th gen stops issuing IP's when computers are connected to the network and seeking dynamic IP's.
Computers that are already connected work fine, but those that are restarted. or computers being connected by WiFi cannot capture a DHCP generated IP.
The problem originally occured occasionally on a previous airport extreme, so I replaced it with a new 5th generation. This AE also shows the same problem on occasion ( perhaps once every few months).
My network has this AE that serves as the connection to the internet, and as the DHCP server, plus four additionl AE's acting bridges. Each of these four have static IP's in the network.
I have a second internal network attached to the same DSL system using a different external IP. This network only differs from the first in that it only has two AE's, one of which is the DHCP server for that network.
Can anyone suggest what might be triggering this problem?
Thanks
JD

No problem.. but I am interested to hear what happens.
The terminal command btw is based on default password ie. public.
If you change the password as you are forced to do now in v6 utility the command changes to
natutil -v -i -s
It will then request a password from you.
Not all of the info here is correct.. the dhcp range is not correct.
natutil -v -i -s
Enter Password:
Searching for Internet Gateway Devices...
2 IGDs found
Getting IGD status...ok
WAN connection details:
Connection type: Ethernet
Link status: Up
Download bps: 1000000000
Upload bps: 1000000000
WAN IP connection details:
Connection type: IP_Bridged
Connection status: Connected
IP address: 192.168.2.201
Uptime: 72333
RSIP Available: false
NAT Enabled: false
LAN DHCP configuration:
Configurable DHCP: true
Forwarding DHCP: false
Low IP: 10.0.1.2
High IP: 10.0.1.200
Netmask: 255.255.255.0
DNS domain: (unknown)
Getting IGD status...ok
WAN connection details:
Connection type: Ethernet
Link status: Down
Download bps: 0
Upload bps: 0
WAN IP connection details:
Connection type: IP_Bridged
Connection status: Disconnected
IP address: 192.168.2.203
Uptime: 413378
RSIP Available: false
NAT Enabled: false
LAN DHCP configuration:
Configurable DHCP: true
Forwarding DHCP: false
Low IP: 10.0.1.2
High IP: 10.0.1.200
Netmask: 255.255.255.0
DNS domain: (unknown)
Still, it might help.

Airport extreme stopped recieving signal

Similar Messages

Maybe you are looking for