AirPort Extreme stops sending wifi signal

I have an AirPort Extreme. It quite frequently (like 2x per month) just stops sending a wifi signal.  The light on the unit is green. As soon as run it through a power cycle it starts working again.  This has been going on for about 6 months but it's really starting to get frustrating. 

What model is the AE? Actual model number if flat.. otherwise just say tall.. !!
How does it fit into the network? Is it bridge or router or extend wireless?? You need to give some info.. no info .. we are guessing...more than usual.
Fix.. hmm... this is sort of feature now.. self-securing wireless.. it turns off to prevent access.
Fix by replacement..
Does it drop out on all devices or just your Mac?? If you run Yosemite.. the cause might be there.

Similar Messages

  • Airport Time Capsule stop send wireless signal, Airport Time Capsule stop send wireless signal

    After instaling several times, alway after a while the wireless router stop sending the signal, or does not start up like in the morning, especially from a windown computer.
    Out house have several computers in Windows and Mac, iphones and ipads and itouch mac book pro,
    How come the router will not start up after a "night of rest"

    Unfortunately, a solid amber is light is not a good sign.
    Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
    Power off the Time Capsule for 15-20 minutes or longer
    Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
    Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
    The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
    If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
    You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options. 
    http://www.apple.com/support/contact/
    If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
    Apple Time Capsule Repairers

  • My Airport Extreme Stops working every evening...

    Funny! My Airport Extreme stops working every evening at about the same time for 4-5 hours. I am assuming that there is some sort of "usage setting" that needs to be set. Unfortunately I cannot find that setting. Any help appreciated.

    A windows 7 laptop is also not seeing the airport extreme wifi signal. So I have a Mac Book Air, iPad & wired devices connected fine. I have an iPhone 3Gs, an iPhone 4 and a windows 7 PC all failing to connect. They all connect fine to other wifi devices. They all connected fine to the Airport extreme until the recent problems started. I don't think it's an iPhone issue, therefore - more likely to be an issue with the Airport extreme?

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • Are we able to use the AirPort Extreme has a wifi extender

    are we able to use the AirPort Extreme has a wifi extender

    Yes, if you plan to extend using wireless only and you use it with another Apple wireless router....an AirPort Express, Time Capsule, or another AirPort Extreme.
    The AirPort Extreme will need to be located where it can receive a strong wireless signal from the "main" AirPort, as the "extender" can only extend the quality of signal that it receives.

  • Why does AirPort Extreme stop working when I plug in a USB hard drive?

    Why does Airport Extreme stop working when I plug in a USB hard drive?  The USB drive has its own power supply.  I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

    The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
    Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
    Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

  • Kernal panics after installing AIRPORT EXTREME PCI 54M WIFI CARD

    hi all - after reading around the forums - i bought this off ebay
    AIRPORT EXTREME PCI 54M WIFI CARD /APPLE POWERMAC G3&G4
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=37 0157697386#ht1341wt892
    but when i boot up i all i get is the screen of death - kernal panic - and need to reboot to another kernal panic
    i have tried it in slots 2-5 and the result is the same - i have now taken it out and the machine boots fine.
    I am keen to use it as a media streamer for appletv - have i bought the wrong card or is there something i can try/do?
    as always - thanks in advance
    darren, lockerbie, uk

    Hi-
    I would consider the problem to possibly be incompatibility with Leopard.
    The seller states 10.2/10.3/10.4 "and above", but does this include 10.5x? Leopard is not specifically mentioned. "And above" could mean up to 10.4.11.......
    If you have a drive with OS 10.4x on it, try booting to that volume with the card.
    If it works, then it's an OS incompatibility.
    If it doesn't, then the card is the problem.
    Biggest problem, is it looks like some generic brand. Not knowing the maker really makes trouble shooting difficult.
    Is is a Broadcom chipset?
    While generic Broadcom chipset cards worked well up through 10.4.11, Leopard seems to have "broken" that generic support that was previously enjoyed, for at least some of those chips. Seems to be an "era" related thing......
    If the chipset is Atheros, the previously successful Orangeware driver also doesn't work in Leopard.

  • I bought the Airport Extreme 802.11n Wifi

    I bought the Airport Extreme 802.11n Wifi from the Apple store in West Edmonton Mall Canada got to the airport, customs scanned the box (which was unopened) and they got a dangerous chemicals hit on the unit. No need to say what else happened there after, i was skinned inside out, body search, drill with the 21 questions and on top that they want to know if i have any ties with any terrorist organizations.
    Why would this device give off such a reading?

    It doesn't.
    The box may have been handled by someone with unclean hands. Or, their security equipment may have been miscalibrated. Or, they're just incompetent. Don't you feel safe?

  • I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station".  All my software is up to date and

    I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station".  Any ideas?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • Airport Extreme 802.11ac wifi stops working - requires reboot

    I have an Airport Extreme 802.11ac which has worked fine for me for several months.  However, in the last 2 weeks, my wifi disappears from all devices about once every other day.  The light is green on the Extreme, but no devices see the wifi.  After a power cycle, the wifi comes back up and works fine, for a while (24-48 hours)
    The Apple AirPort Extreme 802.11ac is running
    software version is 7.7.3
    Router Mode is OFF (Bridge mode)
    DHCP is disabled too.
    2.4Ghz and 5Ghz channel selection is set to auto.
    I have no usb disks plugged in.
    Is anyone else having this issue?

    The light is green on the Extreme, but no devices see the wifi.
    Can you test something by ethernet?? Is it totally wireless or has internet dropped out as well?
    This is important.
    What modem router is it plugged into.. as some are very flakey with the AC model airports?
    Have you tried a full factory reset... and clean new setup?
    This is required now and then. Especially if anything Yosemite is in the network.. please do the following even if you don't use Yosemite it can help.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer or iOS running the latest utility.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen6 and AEwifi for basestation and wireless respectively.
    Even better since the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is a problem for you as bridged you will need to set dhcp reservation in the main router.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.

  • Multiple Airport Extremes with different WiFi networks

    Hello.  I'm not sure how to word this question, but here it goes...
    In our office we have 2 independent internet services.  Each one is connected to its own Airport Extreme.  One of our internet connections went down and I am wondering if it is possible to use the first Airport Extreme connected to the good internet and send a signal to the other Airport Extreme that lost its internet and use it as it was, so we don't have to change all of our printers and computers WiFi logins...  I want the second Extreme to just stay the same network name but get it's internet from the other Extreme..  Does that make sense?
    Thanks

    Unfortunately, it would not be possible to say whether this might work....or even give you an educated guess.......without having a lot of information about how the office network(s) were originally designed and set up, what security was used, whether MAC Address Authentication was used (common in most commercial networks) along with any number of other things that may be involved.
    Best bet would be to get the with IT folks who designed or administer the network for an answer.

  • Airport Express stops sending emails suddenly

    Hi. I'm using airport express 802.11g, and mac mail (OSX 10.7.4).
    Last week it just stops sending emails from one of the server providers i use.
    I'd already tried everything...reseting, creating new mail accounts, changing, repairing permissions, restarts and so on...
    what I find out:
    1. if I plug the ethernet cable, it works
    2. when using mail over wifi/airport, the 'send' works for @hotmail, @gmail...but doesn't work for my other server emails
    3. even thou, if I try to check emails using my server webmail, it works!
    4, receiving emails works perfect
    5. even when trying the wifi over my iphone, it doesn't send either.
    resuming:
    problem: send mail, over wifi, just with my 'dreamhost' server mails
    weird!
    but it's been days I've been trying to find out what is going on, and no clue!
    I hope someone could help me!
    it used to work just perfect, but...
    thks
    paulo.
    airport SN#
    6F80745YU4S

    have you checked for _*wireless interference*_ ?
    download iStumbler (does not work on 10.6) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
    any improvement ?

  • Why does my airport extreme stop issuing dynamic ip

    On several occasions, my airport extreme 5th gen stops issuing IP's when computers are connected to the network and seeking dynamic IP's.
    Computers that are already connected work fine, but those that are restarted. or computers being connected by WiFi cannot capture a DHCP generated IP.
    The problem originally occured occasionally on a previous airport extreme, so I replaced it with a new 5th generation. This AE also shows the same problem on occasion ( perhaps once every few months).
    My network has this AE that serves as the connection to the internet, and as the DHCP server, plus four additionl AE's acting bridges. Each of these four have static IP's in the network.
    I have a second internal network attached to the same DSL system using a different external IP. This network only differs from the first in that it only has two AE's, one of which is the DHCP server for that network.
    Can anyone suggest what might be triggering this problem?
    Thanks
    JD

    No problem.. but I am interested to hear what happens.
    The terminal command btw is based on default password ie. public.
    If you change the password as you are forced to do now in v6 utility the command changes to
    natutil -v -i -s
    It will then request a password from you.
    Not all of the info here is correct.. the dhcp range is not correct.
    natutil -v -i -s
    Enter Password:
    Searching for Internet Gateway Devices...
    2 IGDs found
    Getting IGD status...ok
    WAN connection details:
    Connection type: Ethernet
    Link status: Up
    Download bps: 1000000000
    Upload bps: 1000000000
    WAN IP connection details:
    Connection type: IP_Bridged
    Connection status: Connected
    IP address: 192.168.2.201
    Uptime: 72333
    RSIP Available: false
    NAT Enabled: false
    LAN DHCP configuration:
    Configurable DHCP: true
    Forwarding DHCP: false
    Low IP: 10.0.1.2
    High IP: 10.0.1.200
    Netmask: 255.255.255.0
    DNS domain: (unknown)
    Getting IGD status...ok
    WAN connection details:
    Connection type: Ethernet
    Link status: Down
    Download bps: 0
    Upload bps: 0
    WAN IP connection details:
    Connection type: IP_Bridged
    Connection status: Disconnected
    IP address: 192.168.2.203
    Uptime: 413378
    RSIP Available: false
    NAT Enabled: false
    LAN DHCP configuration:
    Configurable DHCP: true
    Forwarding DHCP: false
    Low IP: 10.0.1.2
    High IP: 10.0.1.200
    Netmask: 255.255.255.0
    DNS domain: (unknown)
    Still, it might help.

  • Airport extreme stops itunes stream after 30 secs

    Hi guys, I am on my second airport extreme now after getting a replacment one from apple. All i really want to do with it is stream my itunes to my hi fi. It didn't work straight out of the box as I was told it would. I set it up on MacBook Pro, brought it downstairs (no longer conected to my modem) switched it on, light eventually went green, found the device on my itunes, ran my music through it and it played for about 30secs, music cut off, the light on the Airport Extreme went to flashing orange and I have to restart the power up to get it back to green. And it does the same again when I try...
    Any ideas whats giong wrong, this is the second device to do this...

    Same problem but I'm not on shared library.
    Only one MBP with iTunes library connected directly wired via firewire
    to external HD. Audio out is wired from minjack on
    MBP to RCA inputs on back of tv. Video is directly from MBP via DVI.
    Frontrow and iTunes both stop after just a few minutes and tv reads "no input signal"
    Audio stops at this point also. I usually have an a/v reciever connected.
    System prefs have screensaver set to never. Frontrow I've tried setting off and on.
    The only way I can have more than 2 minutes with the exception of iTunes wit fullscreen visualizer.

  • Does the airport extreme replace current wifi router?

    I'm not much of a techie so please forgive my ignorance! I have just had BT internet installed with the Home Hub 4. It seems to work with my macbook, iphone, work's windows laptop etc. However, it will not connect to my wifi blu-ray player as apparently the hub does not have DLNA support (I don't know what that is but I think it's relevant). So could someone tell me if the airport extreme would solve this problem? Also, would I plug the airport straight into the phoneline or does it connect to the current hub? Finally, my main phoneline (and apparently the only one I can use for phone/internet) is in the main bedroom which means there is not full signal in the lounge, so would the airport provide better strength?
    Sorry for all the questions!

    So could someone tell me if the airport extreme would solve this problem?
    No, it won't.
    Finally, my main phoneline (and apparently the only one I can use for phone/internet) is in the main bedroom which means there is not full signal in the lounge, so would the airport provide better strength?
    Only if you locate the AirPort in the lounge and connect it to the Home Hub 4 using a permanent wired Ethernet cable connection.

Maybe you are looking for