Airport Extreme: trying to make WDS using 5GHz n only

I'm trying to make the fastest wireless backbone for my connection to the living room media center PC. I've picked up 2 Airport extreme n units and after some time managed to get them working via WDS (main and remote).
I still get choppy throughput with playing video (dvr-ms format) files from the PC to VLC on the MacPro.
I checked the base stations and they are set to WDS 802.11n only (2.4 GHz) -- is there a way to make it 5 GHz only to maximize speed? It doesn't seem to be an option under WDS.

SteveW25561, Welcome to the discussion area!
Instead of using WDS use "Extend a wireless network".
Open AirPort Utility and select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password is necessary.
Click Update to update the base station with new network settings.
Explained on Page 45 of "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

Similar Messages

Airport Extreme 802.11n and WDS with 802.11g express

I have an 802.11n Airport Extreme that I have been using with my AppleTV. I have it set to allow for 802.11b/g, since I have an old Powerbook Titanium that cannot be upgraded.
I recently decided to add my Airport Express 802.11g to the mix to act as a bridge for a remote, wired computer. I did this by enabling WDS on the Extreme/Express.
My question is this: by enabling WDS on the extreme, will the AppleTV still be able to connect at 802.11n speeds, or does it get pulled back to 11g? Is there any way to verify/check this on either the Extreme or the AppleTV?
Thanks,
keith

You can check the connection speed of each wireless client attached to a base station using Airport Utility. Launch Airport Utility, click on the Airport button in the toolbar. On the Summary tab you'll see an item called Wireless clients. It shows you how many wireless client devices are connected to that base station.
Click on the words Wireless Clients and you'll get a graph and a list. The graph shows the signal strength of each client. The list shows the client's wireless MAC, the signal and noise levels and the rate at which each device is communicating. On my Extreme-n base stations, I regularly see rates from 1 to 130 and everything inbetween. It looks like each device runs at it's best rate based on signal strength and error rate.
Assuming you know the MAC of your Apple TV (it's on the serial number label) you can see what wireless data rate it's getting this way.
The thing I've noticed is that my Extreme-g base stations seem to connect to clients at higher average rates than my Extreme-n units. In other words, on the g units I'll see more clients at 54 (the max) or 48 and on the n units just a couple will connect at 130 or 54 but most are at lower rates like 27 or 11 (even 2 or 1), even when they are in the same room as the base station.
I find that very odd and would like to understand it. Anybody have any ideas?

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

AirPort Extreme Base Station error? Using Macbook Pro

I am new to all of this and I thought I would be capable enough to set this all up but apparently I am not. HELP! I am trying to create and set up a wireless network using my Airport. I have an AT&T Westell Modem that is using dial up for internet. When I connect the modem directly to my computer I have internet access. The lights on the modem indicate that the ethernet and all other capabilities are working. I plugged in my Airport Extreme after using a cable to connect the modem to the Airport using the Ethernet port. The amber light is flashing and I followed the instructions to setting up my Airport using Airport Utility from the Applications folder. It detects my correct Airport but when I go to update and create my wireless network this error pops up:
Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6737)
My computer is sitting right next to the modem and the Airport. I am not near any metal or any water, and there are no walls or other electronics to interfere. Am I missing something here? Restarting all devices has also proven unsuccessful...Thanks for anything that can help!

If you just bought it I would recommend calling Apple, they can help you set it up.
Also you should consider getting a high speed Internet connection. They are very inexpensive these days and would make your Internet experience much more enjoyable. Where you live I would think you have a choice of DSL (available from most telephone companies) or Cable, which would be the quickest but also more money too.
Regards,
Roger

Is there any way to set up an Airport Extreme that had been previously used in a password protected network and the password was not provided by the seller ?

Background -
My original Airport Extreme Base Station failed (would not connect to the modem). I purchased a similar, if not identical base station on eBay. Unfortunately, the purchased base station apparently was used in a password protected network. For what it is worth, my son gave me a Netgear wireless router, but it leaves a lot to be desired. For one thing, I use to keep the cable modem in the basement along with the Airport base station, with a printer connected to the USB port. The Netgear device does not have a USB port and also requires that the computer (in this case, the eMac) used to set up the network be connected to one of the ethernet ports. This meant I had to move the cable modem and router into my bedroom, a very undesirable situation. It then occurred to me that the original Airport base station Wi-Fi function might still work, and tested this hypothesis and sure enough, the Wi-Fi function does indeed work I currently have both base stations powered on, with my printer connected to the original. Both base stations appear under my Network icon, but neither Airport Utility 5.4.2 or Airport Administrator Utility 4.2 see either base station. I can select the original base station as my network, connect to the printer or even my other computers, but as soon as I try to select the new one, it asks for the password. I would like to somehow reset this base station and then redefine the network name and encryption.

I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

AirPort Extreme Crash during PPTP connect using VPN on demand

I can reproduce this crash consistently every time.
My AEBSn is running 7.4.2. My MBP is running 10.6.2.
I set up a PPTP connection, tick "send all traffic over VPN connection" in the advanced options.
I add a domain to the "VPN on Demand" list and apply changes.
I click connect, and the AEBS light immediately goes amber. A few seconds later, it's back to green and everything is groovy...unless I try to connect again.
The problem is solved by simply removing the domain from "VPN on Demand."
Here's the relevant snippet from ppp.log:
Sat Jan 30 00:22:36 2010 : PPTP connecting to server 'xxxx.xxxx.xxx' (xx.xxx.xx.xx)...
Sat Jan 30 00:22:37 2010 : PPTP connection established.
Sat Jan 30 00:22:37 2010 : Using interface ppp0
Sat Jan 30 00:22:37 2010 : Connect: ppp0 <--> socket[34:17]
Sat Jan 30 00:22:40 2010 : pptpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.14), deleted interface setting (name: en0, family: Ether, address: 10.0.1.14, subnet: 255.0.0.0, destination: 10.0.1.255).
Sat Jan 30 00:22:40 2010 : linked service found: Setup:/Network/Service/C1126C24-140A-4AE4-A35D-553148185E2F/Interface
Sat Jan 30 00:22:40 2010 : starting wait-interface timer for pptp: 20 secs
Sat Jan 30 00:22:51 2010 : pptpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.14), deleted interface setting (name: en1, family: Ether, address: 10.0.1.5, subnet: 255.0.0.0, destination: 10.0.1.255).
Sat Jan 30 00:23:00 2010 : pptpwait_interfacetimeout: 20 secs TIMEOUT waiting for interface to be reconfigured. previous setting (name: en0, address: 10.0.1.14).
Sat Jan 30 00:23:00 2010 : PPTP has detected change in the network and lost connection with the server.
Sat Jan 30 00:23:00 2010 : Connection terminated.
Sat Jan 30 00:23:00 2010 : PPTP disconnecting...
Sat Jan 30 00:23:00 2010 : PPTP disconnected
Funny, huh?

Hi
I have had this problem with my Airport Extreme since day 1 and it is extremely irritating. Using Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2003 I can crash the router any time I like (or more to the point, really really dislike) by simply initiating a PPTP VPN from any client (wired or wireless) behind the Airport Extreme. The device flashes orange, drops everyone's internet connection and then about a minute later, comes back up again.
Whenever I have to connect to another site using VPN, I need to use NextG internet connection instead of my home cable connection. Any help with this would be gold because other than this really annoying problem (oh and the 'must reboot everytime you make a minor modification to configuration' requirement) I find it a great rock solid wireless access point.

Will older Airport Express Base Station A-1084 work with new AirPort Extreme? I want to use it as an access point for my ps3 for watching movies and just connectin to Internet.

I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.

This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster.

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

How to setup airport extreme vs express at WDS mode?

How to setup airport extreme(Main) vs express(Site) at WDS mode?

Please check out the following Apple Support article on how to configure a WDS.

Airport Extreme (older A1034) Dial-Up using Vista

I have an older iMac and use an Airport Extreme model A1034 to connect via dial-up to the internet via the airport's built in modem. I have networked a friend's notebook, which running windows Vista, so we can share files, etc. Is there a way to have Vista use the airport's modem to connect to the internet?

well it seem apple over look this issue which i am dealing with to as my mom still has a windows machine.
but Java app to the rescue: http://gicl.cs.drexel.edu/people/sevy/airport/#Hangup
you need to download Java.
Also if anyone find the .net version i am looking for it.

Is it possible to share a disk on airport extreme for both Time Capsule use and Windows use

Hello
I was hoping to add some better backup capacity to our home. Can I use the same disk attacheded to the USB port of an Airport Extreme for Time Capsule use for our Macbooks, as well as general use by the windows laptops> If not is it possible to add multiple disks to the Airport Extreme and designate one for Mac Laptops, and the other for Windows use.
Regards
Ted

Regardless of the client's OS, you can use the AirPort Disk (USB HDD attached to the AirPort Extreme's USB) port as a 'NAS' device. You also have the option of partitioning it if you actually want separate volumes to be used between Mac or Windows clients. I would recommend partitioning it for Mac OS Extended (Journaled) which would also format it for HFS+. Normally HFS+ volumes are not readable (natively) by Windows, but the Extreme's File Server will share this drive out with both AFP (for Macs) and SMB (for Windows/Linux) clients.
However, one note of caution. Do NOT use this AirPort Disk for Time Machine backups as this is NOT supported by Apple. Although a number of users have done so, a number of them also post here complaining of corrupted backups.

Airport Extreme and Time Machine backups using a USB drive

Hi there,
I checked through the threads/FAQ's for an answer to this but couldn't find anything...
I have an AE set up with a USB drive attached as my Time Machine backup drive. When I start my MBP up and initiate a forced backup, Time Machine will go and find my drive (via the AE), mount it and carry out the backup without a problem. However, if I start my MBP up and wait for the scheduled hourly backup, TM doesn't see the drive (or perform the backup) unless I go and manually mount the drive first.
I realise I can put the drive in my login items to auto mount on boot but I wondered if there was a way to get the scheduled backups to work without doing this (as with the forced backups).
Thanks

mattschenker wrote:
Pondini,
Actually, I wasn't thinking about theft. I was just thinking that for security in a possible data-loss "event," it was better to have the backup drive physically separated from the main computer. But maybe that's not necessary.
That's unlikely. A power surge could take out both your Mac and connected external HD. You do have your Macs on good surge protectors or, better yet, U.P.S. systems, right? If not, see [Using a U.P.S. System with a Mac|http://web.me.com/pondini/AppleTips/UPS.html].
But wherever the external HD is, unless it's on a surge protector or U.P.S., it's still exposed.
Other things causing data loss are even less likely to affect your Time Machine drive (especially if there's no other data on it).
Yes, I could hook something up to my Mac Mini. Good point! And that would really keep it separated, since it would be in an entirely different floor. But then again, Time Machine backups done wirelessly would probably take forever.
The first one, yes. But if you have a good WIFI connection, subsequent ones shouldn't take too long or be too obtrusive, except when you've updated a lot of data (like installing an OSX update).
See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for setup instructions.
But this just shows that there are a lot of options.
Yes.
I do wish Apple would solve the problem of Time Machine working via the Airport Extreme. That would be my favorite option.
Not likely. Time Machine's been out since Leopard, about 3 years, and backups via an Extreme have never been reliable or supported. Just why they work well on a Time Capsule, or even a USB drive connected to a TC, but not an Airport, is a mystery, but that's the way it is.
But it's always a good idea to keep secondary backups. See #27 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for some suggestions.

Airport Extreme: trying to make WDS using 5GHz n only

Similar Messages

Maybe you are looking for